100 points Why is it not clear why the photos taken by the Canon digital camera are uploaded to the

Isn't this a little princess? Hehe.

I'm a hamster, do you remember me as the one who started the fat rat race?

My SS ** are all from my Ixus 860.

With the macro you want to clear the shutter button for a while, let him focus well.

You hear the camera shrinking.

Also, what software must you have used to make ** small when you uploaded it to the Internet?

I've been hit once before.

You first transfer the ** to the QQ space, use the ** upload tool introduced by the upload window, and he will automatically shrink it for you.

Passed on again. Although this is a bit of a hassle.

But I think it's safer.

It's up to you to want it or not.

Enter the setting mode, there are options, you can set it directly by yourself! There's a hint on it! I didn't understand anything when I first bought it, but I understood it all when I pressed it again!

It is estimated that it was automatically compressed when uploading! There's no way to tune it, except for ** yourself! I mean: try it again, it's okay, if it doesn't work, you have to compress some of it with acdsee first, and then pass it on!

It may be**program that compresses your**, you'd better get a software that can change**, and change the longest side of ** to within 800 pixels, so that it looks good on the Internet.

It may be that you have set the size of ** to the minimum, and then it is a big ** on the Internet so it will be blurry, or it may also be that the pixel of the camera is too low!

Just do what the hero upstairs says!!

Give your ** a look at whether it's you're demanding or something else.

You can look at the format of the photo and set it to the maximum. In general, the instructions are all introduced above, you can see it.

To be honest, I don't know, you said that your family is good to take pictures, but you can't... To be honest, it's weird... There's another way to let your family use it, hehe.

The possible reasons are as follows:

1. Shutter speed.

Too low: The camera shakes caused by hand-holding, or the subject is moving people and objects, resulting in unclear **, which is generally reflected in the motion blur of the heavy-edge type.

Workaround: Increase the shutter speed and shoot with a tripod.

Tips: When shooting handheld, in order to ensure the best clarity, the shutter speed should not be lower than the reciprocal of the focal length used at that time, such as using a 200mm focal length to shoot, the shutter speed should be at least 1 200 seconds, which is the so-called "safety shutter", in fact, the "safety shutter" is not static, such as shooting still life, in the case of support, tripod or good light, the priority of the shutter speed can be completely lowered to take care of other parameters beam hail; When shooting moving subjects, the shutter speed should be higher

2. Inaccuracy of focus: The light on the scene is too dark, too bright, the subject has no contrast (such as a monochrome wall), and operation errors may make the camera unable to focus correctly, resulting in the subject being out of focus and blurring, which is generally reflected as Gaussian.

Blurring of types;

Solution: Select the subject or the same plane of light and dark junction, color junction focus, during the focusing process can be judged by looking at the viewfinder or LCD screen to determine whether the focus is accurate, do not be superstitious about the focus prompt sound, if the camera supports manual focus, you can adjust it manually.

Tips: "Depth of field, master this concept."

3. Camera out-focus: Mechanical failures or firmware bugs inside the camera may cause out-of-focus, in this case, the effect is basically the same as the focus inaccuracy, the difference is that in a certain focal length.

or all ** under the full-burnt oak sail segment are blurred;

Solution: You can use the focus test card to test, once you determine the focus test, find after-sales adjustment or maintenance.

Tips: You need to put on a tripod during the focus test, and each focal length and each aperture must be tested

4. The overall imaging quality of the camera: the effect is not sharp enough, there are few details or smear marks, and most of the current consumer-grade telephoto card machines.

The imaging quality is not very high, especially the wide-angle end and the telephoto end, which is caused by many factors such as sensor size and type, number of pixels, optical structure and lens material, noise reduction algorithm, etc., generally speaking, the light is good, and it is no problem to use it for network sharing or making small sizes, but it is buried and can't stand the test of 100% viewing on the computer;

Solution: Try to shoot in good light and use the best aperture and focal length of the camera, and the subject should be as large as possible in the center of the frame.

Tips: The best aperture of the all-in-one card machine can not be measured by the usual concept, the maximum aperture of some cameras is the best aperture, and the best focal length of most cameras is the standard focal length to the middle focal length of this section, you need to slowly experience it

The problem lies in the size of your CCD, your model is estimated to be a 1-inch CCD, and CCDs of this size are generally used on cards and telephoto at the bottom end. Generally speaking, the larger the CCD size (such as how many cm is for SLR).

How many cm of such a size is good) The size of each pixel per unit area is also larger, so the light energy is more, so the shooting should be clearer.

This external problem has nothing to do with the pixels you are talking about,Pixels within 5 million can also reflect the degree of clarity,After exceeding this number, it is only related to how large the size of the photo can be sold,It is also argued that the larger the pixel,The larger the size that can be sunned,In the future, you should pay attention to the CCD size and pixel two aspects of the camera,You can start a SLR with a little more money at this price!