What should I do if the earphones are plugged in and still played?

Updated on number 2024-03-28
11 answers
  1. Anonymous users2024-02-07

    1. Try to plug and unplug a few more times:If you plug in the headphones or put them out, it may be that the contact between the phone plug or the headphone jack is not good, you can try to plug and unplug it a few more times, or gently turn the headphones to see if the external sound will disappear.

    2. Restart your phoneIt may be that the phone does not automatically switch to headphone mode, you can try to restart the phone.

    3. Replace the earphonesIt may be that the headset is not compatible with the mobile phone, check whether the purchased earphone is compatible with the mobile phone, you can go to the official ** to check the type of headset corresponding to the mobile phone.

    Precautions for the use of headphones.

    Choose the right ear canal size among the random pairs of silicone ear tips and install them on the front of the earbuds to ensure that they don't feel crowded in your ears and won't fall out easily.

    Distinguish your left ear every time you wear it.

    and the right ear and then insert it into the ear canal. Because the design of the earphones has an in-ear angle, the left and right sides are confused, which will be uncomfortable to wear, and the listening effect is incorrect.

  2. Anonymous users2024-02-06

    If you are using a Huawei phone and the sound is still playing when you plug in wired earphones, you can use the following methods to troubleshoot:

    1. If you use a non-standard one-turn multi-cable or earphone adapter cable, it may not be compatible with the mobile phone, resulting in the earphone not being recognized;

    It is recommended that you use the standard charging cable or headphone adapter cable.

    2. If you are using a Type-C interface earphone (charging port), check the steps:

    1.Please try to plug the earphones back in and out to make sure they are fully plugged in. (If using a case or case, make sure it is fully inserted).

    2.It is recommended to change to another mobile phone or Type-C interface earphone connection attempt, after cross-verification, if only your earphones cannot be used, it may be that there is a problem with your earphones. If only your phone does not recognize the earbuds, we recommend that you back up important data (third-party messaging apps need to be backed up separately) and bring your earphones, mobile phone, and purchase voucher to a Huawei Customer Service Center for testing.

    3. If you are using an interface earphone (small round hole), check the steps:

    1.Please try to plug the earphones back in and out to make sure they are fully plugged in. (If using a case or case, make sure it is fully inserted).

    2.If you are using a third-party earphone (non-Huawei earphone), please consult the seller to confirm whether the earphone is an American standard CTIA interface (LRGM line sequence), and Huawei phones do not support the national standard OMTP interface (LRMG line sequence) earphones.

    3.If you are using a Type-C adapter, make sure that the adapter is working properly and that the ports are fully inserted.

    If you still cannot return to normal after the preceding operations, we recommend that you back up important data (third-party communication apps must be backed up separately) and bring your earphones, adapters, mobile phones, and purchase vouchers to the Huawei Customer Service Center for testing.

  3. Anonymous users2024-02-05

    1.If you plug in the headphones or put them out, it may be that the contact between the phone plug or the headphone jack is not good, you can try to plug and unplug it a few more times, or gently turn the headphones to see if the external sound will disappear.

    2.It may be that the phone does not automatically switch to headphone mode, you can try to restart the phone.

    3.Maybe the headset is not compatible with the mobile phone, check whether the purchase is matched with the mobile phone, compatible headphones, you can go to the official ** to check the type of headset corresponding to the mobile phone;

    4.If none of the above methods can be solved, the mobile phone may be damaged by the collision and fall of the mobile phone socket circuit, you can bring the purchase voucher to the official authorized store for repair and testing.

  4. Anonymous users2024-02-04

    There are many reasons why the headphones cannot be recognized, and you can first rule out whether it is a headset problem, a headphone plug problem, or a mobile phone jack problem; It may be that your headphone plug is not compatible with the headphone jack of your phone, and if it still can't be solved, it may be that the internal damage of your phone causes damage to the circuit. Here's a closer look:

    1. First rule out whether it is a headset problem, a headphone plug problem, or a mobile phone jack problem;

    2. The headset is not compatible with the mobile phone, if your headset is with a headset, check whether it is incompatible due to the plug of four or three sections, you can try to buy a headphone adapter;

    3. If it still doesn't work, it is possible that the mobile phone will be damaged by collision and falling, and the socket circuit in the mobile phone will be damaged, and it can only be returned to the factory for repair.

  5. Anonymous users2024-02-03

    First, the cause of the failure:

    1. The earphone is faulty and the interface is not in good contact.

    2. The earphones are not compatible with mobile phones.

    2. Solution:

    1. First rule out whether it is a headset problem, a headphone plug problem, or a mobile phone jack problem;

    2. The headset is not compatible with the mobile phone, if the headset is with a headset, check whether it is incompatible due to the plug of four or three sections, you can try to buy a headphone adapter.

    Troubleshooting common faults of headphones:

    Fault phenomenon: earphone sound leakage.

    1. Turn down the volume of the headphones.

  6. Anonymous users2024-02-02

    1. It may be that the headphones are damaged, you can try to use other headphones to see if you can hear 2If there is no problem with the headphones, it is possible that the headphone jack of the phone is oxidized or damaged, you can try wiping the headphone jack with anhydrous alcohol dipped in a cotton swab. 3. It may be that the phone is too stuck and the response is sluggish, it is recommended to clean up the background and clean up the cache garbage.

    Hope mine is helpful to you.

  7. Anonymous users2024-02-01

    If you are using a vivo mobile phone, and there are problems such as sound playback, noise, and silence after plugging in the earphones, you can troubleshoot them as follows:

    1. Plug the earphones into other devices and observe whether they can be used normally (rule out whether it is a headphone problem);

    2. Reinsert the earbuds and make sure the earbuds are fully inserted into the bottom of the headphone jack of the mobile phone;

    3. Confirm whether it is the original earphone, if not, please use the original earphone for testing.

    If it is still not resolved, it is recommended that the customer service center test and deal with it.

  8. Anonymous users2024-01-31

    There is a problem with the headphone jack that prevents the system from switching to headphone mode.

  9. Anonymous users2024-01-30

    There is a problem with the socket or the settings are not correct.

  10. Anonymous users2024-01-29

    The model does not match or is not plugged in tightly.

  11. Anonymous users2024-01-28

    What should I do if the earphones are plugged in and still played

    1. It may be that the plug of the mobile phone jack or earphone is not cleaned, resulting in poor contact between the two parties, it is recommended to use a cotton swab dipped in water or alcohol to clean the mobile phone and earphone jack.

    2. The earphones used are incompatible with the mobile phone, resulting in the sound of the earphones being played. In this case, it is recommended to change to a compatible headset or use the original headset.

    3. It may be because of the slow response of the system, you can restart the phone and then plug in the headphones to try. Or if it is a problem with the phone itself, you can go to a local mobile phone repair shop and ask a professional to check and repair it.

    It should be noted that there are some headphones with headset design, they are different from ordinary headphones in the design of the plug, so usually the mobile phone does not have a way to recognize, can not be through the headphones to ** audio, in this case you can buy a special adapter to connect. This answer applies to mobile phone models from most brands such as Apple, Huawei, Xiaomi, and vivo.

    Headphones:

    Headphones, also known as headphones or earpieces, are a pair of conversion units, which accept the telecommunication signals sent by the **** device or receiver, and use the speakers close to the ears to convert them into audible sound waves.

    Headphones are generally detachable from the **** device, and the wearing methods include in-ear, head-mounted, earbuds, etc., which are mostly used in mobile phones, walkmans, radios, portable games, etc., and are also used in computers and Hi-Fi audio.

Related questions
29 answers2024-03-28

If the sound is still playing when your phone is plugged into wired earphones, you can use the following methods to troubleshoot: >>>More

3 answers2024-03-28

Reason 1: Poor contact of the phone plug or headphone jack. >>>More

3 answers2024-03-28

Headphones (earphones; headphones; head-sets;earpieces are a pair of conversion units that accept the telecommunication signals sent by the **** or receiver and convert them into audible sound waves using speakers close to the ear. The headset is generally detachable from the **** device and is connected by a plug. The advantage is that you can listen to the sound alone without disturbing others; It can also isolate the sound of the surrounding environment, which is useful for people who use it in noisy environments such as recording studios, DJs, travel, sports, etc. >>>More

9 answers2024-03-28

What brand of mobile phone is obvious, the decoder problem basically can't be changed If you use backgammon and so on, such ** mobile phone is distorted, that is the problem of headphones (backgammon oppo is Microsoft's *** processing software) or *** problem After all, *** is a lossy audio file If you use a high-end product like iPhone4 It supports lossless audio format (a song is about 20m to 30m), so if it is still distorted, it is definitely a problem with headphones If you want me to see it, it's a problem with your mobile phone itself, and the interface is unlikely to be distorted (even if there is only a trace of copper wire connected, the sound quality can be guaranteed) You either check the internal audio output port of the mobile phone to see if there is a false connection (poor contact, the wire, etc., may directly change the sound quality) or re** song and then try to change the headphones If it doesn't work, it's a problem with the decoder itself Basically, no one goes to repair the money to rebuy a **mobile phone, I hope it helps you.

8 answers2024-03-28

1.Turn on the Bluetooth headset switch, it is recommended to check the Bluetooth headset manual. >>>More