The headphones of the Huawei mobile phone are plugged in or put outside.

If the sound is still playing when your phone is plugged into wired earphones, you can use the following methods to troubleshoot:

1. If you use a non-standard one-turn multi-cable or earphone adapter cable, it may not be compatible with the mobile phone, resulting in the earphone not being recognized;

It is recommended that you use the standard charging cable or headphone adapter cable.

2. If you are using a Type-C interface earphone (charging port), check the steps:

1.Please try to plug the earphones back in and out to make sure they are fully plugged in. (If using a case or case, make sure it is fully inserted).

2.It is recommended that you change to another mobile phone or Type-C interface earphone connection and cross-verify.

If only your headphones don't work, there may be a problem with your headphones. If only your phone does not recognize the earbuds, we recommend that you back up important data (third-party apps such as QQ and WeChat must be backed up separately) and bring the earphones, smartphone, and purchase voucher to the Huawei Customer Service Center for testing.

3. If you are using an interface earphone (small round hole), check the steps:

1.Please try to plug the earphones back in and out to make sure they are fully plugged in. (If using a case or case, make sure it is fully inserted).

2.If you are using a third-party earbud (non-Huawei earbud), please consult the seller to confirm whether the earbuds are US Standard.

CTIA interface (lRGM line sequence), Huawei mobile phone.

The national standard OMTP interface (LRMG line sequence) earphones are not supported.

3.If you are using a Type-C adapter, make sure that the adapter is working properly and that the ports are fully inserted.

If you still cannot return to normal after the preceding operations, we recommend that you back up important data (third-party apps such as QQ and WeChat must be backed up separately) and bring your earphones, adapters, mobile phones, and purchase vouchers to the Huawei Customer Service Center for testing.

It is possible that the headphone jack is in poor contact.

This is caused by poor contact between the jack of the headphones and the headphone cable. The specific method is to use a cotton swab to bring out the debris in the headphone jack in a rotating way, and most of them can solve such a problem. If there is dirt at the bottom of the headphone jack, you can use a toothpick to remove the dirt from the bottom.

After plugging in the headphones, if the external status is still displayed, it means that there is a problem at your settings level, you can cancel the earphone mode, and then wipe the earphone jack with a cotton swab, so that the external amplifier will not appear.

In this case, the phone does not recognize the headphones, it may be that the headphone jack is too dirty, and it may not be compatible with this headset.

This should be a problem with your phone's headphones, when you plug in the headphones, the phone's sound is still in an external state, which means that the phone's headphones are problematic. Of course, it is not excluded that your mobile phone may be connected to a Bluetooth headset, and when you plug the headphones in, of course, there is no sound! Therefore, I suggest that you still carefully check the situation of your mobile phone for analysis.

Hello, landlord. 1.If you plug in the headphones or put them out, it may be that the contact between the phone plug or the headphone jack is not good, you can try to plug and unplug it a few more times, or gently turn the headphones to see if the external sound will disappear; 2.

It may be that the phone does not automatically switch to headphone mode, you can try to restart the phone; 3.Maybe the headset is not compatible with the mobile phone, check whether the purchase is matched with the mobile phone, compatible headphones, you can go to the official ** to check the type of headset corresponding to the mobile phone; 4.If none of the above methods can be solved, the mobile phone may be damaged by the collision and fall of the mobile phone socket circuit, you can bring the purchase voucher to the official authorized store for repair and testing.

Hello, this situation arises. It could be a problem with the headphones. It is recommended that you try to plug and unplug it a few more times.

Of course, if you open the radio software, then this is normal, it is a problem with the settings. If that doesn't work, then it's recommended that you go into engineering mode and put the headphones to the test. The specific steps can be as follows.

Good luck!

If you have a Huawei mobile phone, if you still have external audio after plugging in the earphones, it may be that there is a problem with the earphones, and the failure to successfully import this audio into the earphones is a fault in the line of the earphones.

If the phone is plugged in and the headphones are still played, first of all, you need to check whether your headphones are plugged in Generally speaking, if your phone is wearing a phone case, there is still a certain distance between the headphone jack and the phone, resulting in the headphones can not be fully plugged in, resulting in the phone will also be put outside, it is recommended that you take the phone case off and try.

If the earphones are plugged into the phone and can be played out, it proves that the earphones are broken, or the earphone jack is not plugged in properly.

Hello friends, the Huawei mobile phone earphones are still being plugged in, in this case, there should be a problem with the earphones, just try to change a headset, under normal circumstances, it will not be put outside.

1. If you use a non-standard one-turn multi-cable or earphone adapter cable, it may not be compatible with the mobile phone, resulting in the earphone not being recognized; It is recommended that you use the standard charging cable or headphone adapter cable. 2. If you are using Type-C interface earphones (charging port), check the steps: 1

Please try to plug the headphones back in

This situation means that your headphones are not working, and the sound is still being played out through the speakers, so check if there is a problem with the headphone jack.

Most of the headphone jack is in poor contact, let's replace it with a new one.

I started to be depressed in my third year of junior high school, and I have been repeated, and now I am basically **, I have not been admitted to college, and my girlfriend has not pursued.

Depression is a cold in the mind, you can try psychological counseling.

After plugging in the headphones, they will be released, so this headset does not match your mobile phone and cannot be used.

The effect of plugging in the ears of Huawei mobile phones is really good, I can't hear my own voice, and I am completely intoxicated by myself, and it is safe in this kind of open space.

Hello, I. Cause of failure:

1. The electrical resistance contact of the earphone in the air is poor.

2. The contact points of the headphone jack are not in good contact.

3. Turn on the Bluetooth mode and connect the Bluetooth audio device.

2. Solution:

1. If the earphone is not used, it means that the current headset in the air has poor resistance contact, the resistor has the function of identification, and will automatically enter the headphone mode after inserting the earphone, and the system will automatically exit the headphone mode after the earphone is unplugged;

2. You can try to pull it out repeatedly, which may be caused by poor contact with the contacts of the headphone jack;

3. You can use a cotton swab or tweezers to carefully clean the headphone jack, it may be that the metal contacts in the earphone jack have oxidized after using it for a period of time, use sandpaper to wipe the interface part;

4. Check whether the Bluetooth mode is turned on and the Bluetooth audio device is connected, it may be because the Bluetooth device that has been connected is connected again, so the mobile phone judges that it uses Bluetooth to output audio;

5. If the above methods try to rule out the inability to exit the headphone mode, it may be that the headphone jack is faulty, and you can only find a maintenance personnel to check and repair.

Extended Information: Common troubleshooting of mobile phones:

Fault phenomenon: The mobile phone suddenly has no sound.

1. The most common is that the volume is not turned on, and the mobile phone is set to vibrate. Many people often forget to modify it after setting it to vibrate, and when the phone is placed on the pillow, the sound is very small when it vibrates, resulting in no hearing. In this case, you just need to turn the volume back on.

2. The speaker of the mobile phone is broken, and in this case, you need to take it to the mobile phone repair shop for repair. In general, it is best to return to the factory for maintenance, which can ensure the quality of the replaced parts.

3. The phone has a software failure and the audio driver is damaged. In a similar situation, you can try yourself from the official **** driver of the phone in question. Of course, if it can't be solved, then it needs to be returned to the factory for repair.

4. The sound of many Android phones is divided, such as multi**, playing games, etc., it depends on the specific situation, such as multi** There is no sound, as long as the multi** is adjusted to the maximum.

5. There is no sound when playing **, which leads to this situation is generally a problem of brushing, and there is no brushing into the radio. This is easy to solve, relatively simple, just re-brush it in.

6. There are other reasons, such as the notification bar sound shortcut is turned off, etc., these can be solved by yourself.

7. If you have tried the above methods and still don't work, it may be a hardware failure, and it is recommended to send the phone for repair.

I also encountered this situation,The quickest way to restart the phone,The headset will be used normally,Unplug the headset in the state of listening to songs,**It will automatically turn off,Plug in the headset pause seconds**Enter the headphone state,These situations are all in the headphone plug on the external play,I use Huawei P20,Less than 5 months,Personal experience,Don't like it, don't spray,It feels like the jack is in poor contact,I don't know what parts are broken inside,This may be the prelude to the scrapping of the mobile phone。

Huawei is not the material for making headphones, it is best to match headphones from other manufacturers, several of my Huawei mobile phone headphones are not easy to use, the headphone jack and the headphones do not work well together, the headphones I use now are OPPO's headphones, after all, this aspect of making ** mobile phones can still be guaranteed.

I'll tell you the correct solution, Huawei wants to equip you all with the most ** Bluetooth headset, so the program automatically cuts off the headphone jack communication for you.

If the landlord still plays out the sound after plugging in the headphones, then in this case it should be caused by the poor contact between your headphones and the headphone jack. It is recommended that the landlord clean up your headphone hole, or see if there is any oxidation in your headphone head, you can wipe it to see if it can be solved.

Hello, there are many reasons why the headphones cannot be recognized, you can first rule out whether it is a headphone problem, a headphone plug problem, or a mobile phone jack problem; It may be that your headphone plug is not compatible with the headphone jack of your phone, and if it still can't be solved, it may be that the internal damage of your phone causes damage to the circuit. Here's a closer look:

1. First rule out whether it is a headset problem, a headphone plug problem, or a mobile phone jack problem;

2. The headset is not compatible with the mobile phone, if your headset is with a headset, check whether it is incompatible due to the plug of four or three sections, you can try to buy a headphone adapter;

3. If it still doesn't work, it is possible that the mobile phone will be damaged by collision and falling, and the socket circuit in the mobile phone will be damaged, and it can only be returned to the factory for repair.

It may be effective to clean the headphone plug and headphone jack. Restarting the phone is at most a little more power, which will not cause any damage to the phone, but can terminate some unused processes and improve the running speed of the phone.

It may be caused by poor contact between the earbuds and the mobile phone, or it may be that the earphones are broken, or there is a problem with the socket of the mobile phone.

There are many factors such as poor contact of the headphone jack, problems with the headphone plug, and so on.

The two possibilities are either not plugged in securely or the headphones are broken.

If you are using a Huawei phone and the earphone icon is not displayed after plugging in wired earphones, and the sound still comes from the speaker, you can use the following methods to troubleshoot the operation:

1. If you use a non-standard one-turn multi-turn cable or earphone adapter cable may not be compatible with your mobile phone, resulting in the earphone not being recognized.

It is recommended that you use the standard headset adapter cable and make sure the headphones are fully plugged in.

2. If you use a Type-C adapter, make sure that the adapter is normal and that each connector is fully inserted.

3. If you are using a third-party earphone (non-Huawei earphone), please consult the seller to confirm whether the earphone is an American standard CTIA interface (LRGM line sequence), Huawei mobile phones do not support the national standard OMTP interface (LRMG line sequence) earphones.

4. Try to change the earphone connection or change other mobile phones to connect your earphones, if only your earphones cannot be used, it may be that there is a problem with the earphones.

If your phone is still out of the loop, contact Huawei Consumer Service** (950800), back up important data in advance (third-party apps such as QQ and WeChat need to be backed up separately), and bring your purchase voucher to a nearby Huawei Customer Service Center for further assistance.

Boarding service. Make an appointment for service.

Repair spare parts** inquiry.

Operating phone: Huawei P40

Operating system: The steps to plug in the Huawei earphones or play them outside are as follows:

1. Open the phone settings interface and tap Accessibility.

2. Enter the accessibility interface and click Digital Earphones.

3. Enter the digital earphone interface to see if the earphones can be detected, if not, there should be a problem with the hardware of the mobile phone and it can be sent for repair.

Precautions for wearing headphones:

1. Try not to exceed 40 decibels when wearing headphones.

Nowadays, it is very common for people to wear headphones, whether they are taking the bus or taking the subway, we can always find that there are many users on the road, who are wearing headphones to listen to songs. But everyone also knows a truth, the ear has the size of the volume decibel it can bear, and the limit of this decibel is about 160 decibels.

At the same time, we often feel uneasy about the noise coming from the outside, let alone headphones, which are close to the ears and transmit sound directly to the eardrum and brain. Ridge.

2. Don't wear headphones for too long.

If the volume is always soft bass, it is recommended that the headphones be worn for 3-4 hours, because wearing the headphones for a long time will cause pain in the ears, and it is not good to wear the headphones for a long time. As mentioned above, the ear is the closest place to the eardrum, and at such a close distance, the sound will actually cause unnecessary damage to the ear.

3. Pay attention to the environment in which the earphones are used.

In noisy places, try to avoid using headphones. Because sound is relative, in a loud environment, if you want to hear the sound in the headphones clearly, then the volume emitted by the headphones must be louder than the outside sound. In this case, we will all turn up the volume unnaturally, and if we do this, our ears will be seriously damaged.

Don't wear headphones when you sleep, because people will turn over and leak when they sleep, and turning over while wearing headphones will naturally press on their ears. Therefore, in all cases, you should try to avoid wearing headphones. At the same time, the New York Health Council recommends the use of over-ear headphones and avoids the use of in-ear headphones as much as possible.