How to install the system on Huawei RH2288 V3

1. Install it by servicecd;

2. Use a CD-ROM or ISO image file.

to carry out the installation; 3. Complete the OS installation during the loading process of the hard disk controller driver.

This article will introduce how to use the ISO image file of the optical disc to directly serve the Huawei server RH2288H

v2 to do the system, the steps are as follows:

1. Obtain materials related to OS installation;

2. Set BIOS parameters;

3. Configure the RAID relationship for the Huawei Tecal server.

4. Directly install the service area OS through CD-ROM or image files;

5. Log in to the server for remote control.

interface, loading a disc or image file:

If you use a CD-ROM for installation, place the OS installation CD in the server's physical CD-ROM drive, go to 6;

If you want to use an ISO image file, go to 2

6. Remote on the server

The countrol command window toolbar, the stand-alone CD, will pop up the virtual CD-ROM drive.

dialog box, click 'Image File' in the box and click "Browse", a new dialog box will pop up. Select the ISO image file of the OS in the box and click Open. In the Virtual Drive dialog box, click Connect and wait until the Connect status changes to Disconnected, indicating that the virtual drive has been successfully connected to the Huawei server RH2288H

v2。7. Restart the HUAWEI server RH2288H

v2。During the server startup process, after the English prompt "F11" related to "F11" appears at the bottom of the screen, press the keyboard "F11" in time to enter 'Boot

manager' interface. Select 'Interface' on the 'Boot Mode' option, then 'Boot from CD-ROM'. Example: "huawei."

***-rom

Finally, press the 'Enter' key to enter the Huawei server RH2288H

v2 operating system boot screen.

8. Set up in three steps on the 'welcome' interface

In the 'language' area, it is recommended to set it to 'english(us)';

In the 'keyboard

layout' keyboard mode area, it is recommended to set it to 'english(us)';

In the 'license'

Agreement 'Allow Permissions' area, select 'Settings'i

agreeto

thelicense

terms’。

9. Add and delete the software according to the actual needs, click 'OK' after completion, in order to avoid some special network cards of the same type in the future, Huawei server rh2288h can no longer appear

v2, it is recommended to check 'c c++'

compiler

andtools’。

10. Follow the wizard to replace the disc, complete the basic installation, and then restart the system and enter 'password'

forthe

system

administrator

root" interface, set the password of the root user, remember it and back it up.

Huawei server can not do the system, can only install the system, if you don't, it is recommended to seek Huawei official technical support, if the company has the technology can also let the technology install, if not, don't toss around, time-consuming and laborious not to say, if it is broken, it will be over, you can also find Chongqing Wuji Information Technology, you can also install.

There are two things that need to be set in the motherboard:

Boot the device to UEFI mode;

If you want to install 64-bit Win7 (hardware support required), you need to disable the Secure Boot option.

Huawei RH2288HV2 server system installation flow chart, you just follow the process to install.

1. Install it by servicecd;

2. Use a CD-ROM or ISO image file for installation;

3. Complete the OS installation during the loading process of the hard disk controller driver.

1. Obtain materials related to OS installation;

2. Set BIOS parameters;

3. Configure the RAID relationship for the Huawei Tecal server.

4. Directly install the service area OS through CD-ROM or image files;

5. Log in to the server remote control interface and load the CD or image file

If you use a CD-ROM for installation, place the OS installation CD in the server's physical CD-ROM drive, go to 6;

If you want to use an ISO image file, go to 2

1. Install it by servicecd;

2. Use a CD-ROM or ISO image file for installation;

3. Complete the OS installation during the loading process of the hard disk controller driver.

1. Obtain materials related to OS installation;

2. Set BIOS parameters;

3. Configure the RAID relationship for the Huawei Tecal server.

4. Directly install the service area OS through CD-ROM or image files;

5. Log in to the server remote control interface and load the CD or image file

If you use a CD-ROM for installation, place the OS installation CD in the server's physical CD-ROM drive, go to 6;

If you want to use an ISO image file, go to 2

6. In the toolbar of the remote countrol command window of the server, the virtual drive dialog box will pop up for the stand-alone CD, click 'Image File' in the box and click "Browse", a new dialog box will pop up. Select the ISO image file of the OS in the box and click Open. In the Virtual Drive dialog box, click Connect and wait until the Connect status changes to Disconnected, indicating that the virtual drive has been successfully connected to the Huawei server 288h v2.

7. Restart the Huawei server 288h v2. During the server startup process, after the English prompt "F11" appears at the bottom of the screen, press the keyboard "F11" in time to enter the "Boot Manager" interface. Select 'Interface' on the 'Boot Mode' option, then 'Boot from CD-ROM'.

Example: "Huawei ***-ROM VM, and finally, press the 'Enter' key to enter the Huawei server 288H v2 operating system boot interface."

8. Set up in three steps on the 'welcome' interface

In the 'language' area, it is recommended to set it to 'english(us)';

In the 'Keyboard Layout' keyboard mode area, it is recommended to set it to 'English(us)';

In the 'License Agreement' Allow Permissions section, select 'I agree to the license terms'.

9. Add and delete the software according to the actual needs, click 'OK' after completion, in order to avoid some special network cards of the same type that cannot be used on Huawei server 288H v2 in the future, it is recommended to check 'C C++ Compiler and Tools'.

10. Follow the wizard to replace the CD, complete the basic installation, restart the system, enter the "Password for the System Administrator "root" interface, set the root user password, remember and back up.

Whether you need to connect an additional power supply depends mainly on the requirements of the GPU card. If the GPU card requires an external power supply, then the RISER card should be installed, which has a power supply interface.