How to get rid of the iron marks caused by the overheating of the iron?

The scorch marks on the silk clothes can be mixed with an appropriate amount of baking soda powder mixed with water to form a paste, applied to the scorch marks, and dried naturally, and the scorch marks can be eliminated with the separation of the soda powder.

After the chemical fiber fabric is yellowed, it should be immediately put on a wet towel and ironed, and the lighter one can be restored to its original state.

When the cotton fabric is yellowed, you can immediately sprinkle some fine salt, then gently rub it with your hands, dry it in the sun for a while, and then wash it with water, the scorch marks can be reduced or even completely disappeared.

The scorched part of the tweed material will lose the fluff after brushing, revealing the bottom veil. You can use the tip of a needle to gently rub the fluff until you pick up a new fluff, then pad a damp cloth and iron it several times along the inverted direction of the original fabric fluff to recover.

Winter coats should not be washed and ironed frequently. If the thick coat is accidentally burned, you can use good fine sandpaper to rub the burnt area, and then gently brush it with a brush, and the burn marks will disappear.

If the ironing is accidentally ironed. You can cover the non-sticky part of the clothes with paper or other things, and wet the pasted part with cool water and expose it to the sun. When the water is dry, dust off some more water until it becomes similar to the color of the other parts.

Try wiping it with a towel dipped in vinegar, and after wiping it clean, fill the iron with water, and spray it with steam to remove the vinegar smell.

I had such a situation last time, and this is how it was resolved.

It doesn't seem like so.

I've been like this too.

It hasn't been eliminated either.

Spray wrinkle remover: Spray wrinkle remover evenly where the garment has creases, and flatten the garment by hand and let it dry naturally. With a hair dryer:

Spray an appropriate amount of water on your clothes and dry them with a hair dryer, you can pull them slightly, and keep the hair dryer at an appropriate distance from your clothes. Use vinegar: Add one part vinegar and three parts water to the spray bottle and spray it on your clothes to dry for a while, and the folds will disappear when dry.

1. Spray clothes wrinkle remover: spray wrinkle remover evenly in the place where the clothes have creases, and flatten the clothes by hand, and then dry them naturally.

2. Use a hair dryer: spray an appropriate amount of water on the clothes, dry them with a hair dryer, you can pull the clothes slightly, and keep a proper distance between the hair dryer and the clothes.

3. Use vinegar: Add one part vinegar and three parts water to the spray bottle, spray it on the clothes to dry for a while, and the folds will disappear after drying.

4. Use a flat hair straightener: let it heat up slowly. Don't get too hot to avoid ironing your clothes. Once it's hot, just straighten the folds like you would your hair.

5. Use boiling water: Iron with boiling water in an iron or stainless steel cup, and be careful not to burn yourself during use.

Hello, there are several methods for you to choose from, 1. Wipe with fine salt. If the charring is not severe, you can pour fine salt over the charred area and wipe it off. It should be noted that it should not be too much.

2. Baking soda. All-purpose baking soda can also be lit up. Mix baking soda with water to make a paste, then apply it to the burnt area, and wipe it clean.

3. White glue. You can also squeeze the white glue in the scorched place, and tear it off after the white glue is dry. Be careful to unplug the socket before getting wet.

The water must be wiped dry.

Method: 1. The bottom plate of the electric iron is often due to improper temperature control during ironing, so that a layer of coking adheres to the surface, which should be removed in time, otherwise it will accumulate more and more, affecting the ironing effect.

2. You can use decontamination powder or cuttlefish bones dipped in some water to scrub, and do not use metal hard objects to scrape, so as not to scratch the electroplating layer.

3. When ironing is completed, remember that the iron is cooled naturally, and cannot be cooled by splashing water.

4. After the use of the temperature-regulating electric iron, the temperature-regulating knob should be placed in the "off" or "cold" position to avoid the aging of the internal elastic metal parts due to long-term deformation.

5. For the sleepy steam spray type electric wang mold sleepy iron, if you find that the water in the water level glass box is turbid or if you find that there is white powder falling in the exhaust hole, you can use white vinegar and water code segments.

Summary. Hello, the clothes are ironed so repaired 1First, dissolve a small piece of alum in warm boiling water, brush the alum water on the burnt part of the clothes, and then put it in the sun to dry.

Scrubbing with a toothbrush and then steam fumigation with boiling water can reduce scorch marks.

Cover the unscorched part with paper, then spray the scalding part with cold water, and expose it to the sun. After the water is dry, spray some water until the parts are similar in color.

Now to get rid of the ironing marks, drop the edible wax on the raw edge paper, cover the folds, and iron it with an electric iron, the marks will disappear and the clothes will be restored to smoothness.

How to repair clothes burned by irons.

Hello, I have seen your question and am sorting out the answer, please wait a while

Hello, the clothes are ironed so repaired 1First dissolve a small piece of alum in warm boiling water, brush the alum water on the burnt part of the clothes, and then put it in the sun to dry. 2. Scrub with a toothbrush and then match the ridge, and then use the steam fumigation of boiling water to reduce scorch marks.

3. Cover the unscorched part with paper, then spray the scalding part with cool water, and expose it to the sun. After the water is dry, spray some water until the parts are similar in color. 4 Now to eliminate the traces of eggplant ironing, drop edible wax on the raw edge paper, cover the folds, and iron it with an electric iron, the traces will disappear, and the clothes will be restored to smoothness.

In addition, fumigation can remove wool or fabric, and ironing clothes are yellowed. Scrub with a toothbrush and then steam fumigation with boiling water to reduce scorch marks. Exposure to the sun can also be touched to remove the burning of clothes.

Cover the unscorched part with paper or other things, spray the problem area with cool water, and expose it to the sun. After the water is dry, spray some water until the colors of the smiles are similar.

If you have answered your questions, please click on the evaluation to give 5 little stars <>

You can apply toothpaste and wipe it with a towel to remove it. Try not to use steel wool balls, it will scratch the iron and make it easier to get dirty.