What problems should be paid attention to in the decoration construction of the bathroom?

The main problem is the design of plumbing renovation and the waterproofing of the ground.

Almost every renovated family will have some regrets, or the design is not well considered, or the decoration is negligent and leaves "sequelae", especially the bathroom this function first, plumbing and electricity space, in the home is difficult to construct, decoration design, sanitary ware selection, construction quality, which can not be ambiguous. Whether it is a decoration company or a consumer, as long as you don't pay attention to it, there will be shortcomings, and the reasons for this are mainly the following three aspects:

1. I didn't consider the installation before purchasing, and found that it was neither beautiful nor convenient to use after buying. In recent years, consumers are more and more willing to spend money on bathroom decoration, in addition to construction, the follow-up investment is also very large, generally speaking, the cost of buying bathroom sanitary ware is about 1 8 of the total amount of decoration. Due to the variety of bathroom products, consumers often pick and choose when purchasing, and only find that they are not coordinated with their bathroom at all after buying home.

For example, if you choose a very beautiful washbasin in the market, only to find that it is a little bigger when you get home, it takes up part of the toilet space, so that tissue boxes and trash cans are not "in place", and as a result, it is not convenient every time it is "convenient".

Reminder: It is best for consumers to consider what kind of products to buy in the design stage, and reserve space, transform pipelines, and create installation conditions in accordance with the specific installation requirements and technical parameters of the purchased products during construction, so as to ensure that the decoration process can be completed smoothly and the bathroom products can be installed and used normally. In addition, the installation of sanitary ware requires very accurate measurement data, even if it is 1 cm off, it may need to be reworked, so be sure to ask a professional to measure the size, sloppy.

What aspects need to be paid attention to in bathroom decoration construction? Bathroom decoration is very detail-oriented, if you ignore these details in the construction, then there will be trouble in the future service life, so you must pay attention to these details in bathroom decoration. The most important thing for bathroom decoration is to do a good job of waterproof construction, there are many people to do waterproof construction is meters, in fact, it is not good, it is best to do it in one step, reach the top floor, and avoid hidden dangers in the later stage.

<>In addition, the restroom floor should also find a good slope so that the water can flow smoothly into the sewer and there will be no standing water. Refers to the slope of the bathroom tiles, the head office understands, the bricklayer basically understands, but it does not mean that everyone understands, some slopes are more pasted. Qualified bricklayers make the floor drain to the lowest point, which means that some people do floor drains, that is, dig a hole in a whole brick, which is not a good or bad practice.

I'll start by cutting the tiles around the tiles into small pieces so that I can place the drain in an absolutely low position.

If you're just digging a hole in the middle of the tile, it doesn't have to be the lowest, it should be parallel to the rest of the place, or even a little higher. So this time the water may not automatically flow into the sewer and you have to sweep it. And you don't look at the tiles, do the slope, there will be a problem if there is no slope under the tile, what is the problem?

That is, the water that leaks from the tiles will accumulate on the ground and form an odor over a long period of time. But if the slope is well maintained, the water will naturally flow into the floor drain. Some people may not understand that the method of pasting the ground is the easiest to hollow out when the ground is leveled and then he looks for slopes and uses gray tiles of different thicknesses.

A truly experienced mason must first smooth the bottom and then follow this shape, and an inexperienced mason is directly full, and he can always rely on uneven walls. Find the thickness of the volcanic ash. To do this slope is to find the ground to find the cement slope, and then according to the shape of the cement slope, let the tiles be paved, and will not be found with ash, this is the experience.

So an inexperienced master at this point is not good.

I think one of the most important things in bathroom decoration is to do a good job of waterproofing, waterproofing is the top priority, and another is that the color and layout should be reasonable, and it is best to achieve dry and wet separation.

In the decoration of the bathroom, it is necessary to choose a siphon toilet as much as possible, it is best to do a good job of dry and wet separation, leave a certain distance on both sides of the toilet, do a good job of waterproof and moisture-proof treatment, and reserve a water circuit.

Be sure to do a good job of waterproof coating, the ground must be tilted, be sure to install soundproof cotton for the pipes, be flat when tiling, and make the wall waterproof.

When there is no bathroom at home for decoration, you need to consider more details such as waterproofing, ventilation, etc. So what exactly should you pay attention to? Let's take a look.

1. The bathroom is an area with more water, and waterproofing should be put in the first place in the bathroom decoration. When decorating the bathroom, it is necessary to determine the waterproof height of each area of the bathroom, choose a good waterproof material, and pay attention not to destroy the original waterproof layer when carrying out hydropower transformation. When the waterproof project is completed, the closed water test should be carried out on the toilet to check whether the waterproof project of the toilet is qualified to avoid affecting the normal use in the future.

2. The toilet is a multi-functional area, which needs to be reasonably planned and spaced to ensure the normal use of various functions of the toilet. When planning and layout, soft partitions and hard partitions can be used to divide them. The use of soft partitions can increase the aesthetics of the bathroom, but it is not practical for small hygiene.

The rigid partition can effectively divide the space and is suitable for all kinds of toilets.

3. Commonly used sanitary partition materials are glass, plexiglass, aluminum alloy, plastic steel, rusty steel, etc., and commonly used partition tools are shower curtains. The toilet has heavy water vapor, so it is best to choose a glass material that can be waterproof for waterproofing considerations. This material not only has a good waterproof effect, but also can be convenient and beautiful in use.

4. In the precautions for bathroom decoration, safety is also a problem that cannot be ignored in bathroom decoration. There is a lot of water in the bathroom, so you should choose a floor tile with anti-slip function to avoid falling during use. Lamps and sockets should be equipped with protective covers to avoid potential safety hazards caused by water vapor.

Secondly, the bathroom cabinet of the bathroom should also choose arc-shaped furniture to avoid hitting the bathroom cabinet when falling.

1. In terms of electrical, it is necessary to install leakage protectors and grounding wires, 2 electrical appliances should be selected as far as possible with good quality and performance, 3. Special attention must be paid to the installation of toilets to prevent water pipe rupture, and 4 installation bath bombs should also be selected with protective covers to prevent water splashing.

Bathroom decoration construction needs to pay attention to the layout of the upper and lower water pipes, as well as the quality of the water pipes must choose a good product, because this is often used, but also easy to have small problems.

Bathroom decoration construction needs to pay attention to waterproofing, try to use waterproof materials, do a good job of dry and wet separation, in addition, if there are elderly people at home, you need to pay attention to the ground anti-slip, to prevent falling.

1.The most important thing is waterproof, this is not good, if the downstairs is going to leak, all the floor tiles have to be reworked.

2.The bath room must be made of tempered glass, which is safer.

3.Multiple floor drains are much stronger than one less.

The most important thing in bathroom decoration is to prevent moisture, and I will introduce you to the method of moisture-proof treatment.

Ceramic bathroom mildew prevention: how to make ceramic bathroom products as bright as new? A convenient and eco-friendly way to do this is to wipe it with white vinegar and lemon peel.

The specific method is to clean the dirt on the surface of the sanitary ware first, and then wipe the surface of the sanitary ware with a soft cloth dipped in white vinegar or wipe it directly with lemon peel.

Bathroom cabinet moisture-proof: For toilets without dry and wet partitions, it is best to choose a professional moisture-proof panel for the panel of the bathroom cabinet. In daily life, especially in spring, great attention should be paid to keeping the surface dry, and after each wash, it is necessary to wipe off the water beads attached to it with a dry cloth in time.

Tile seepage and mildew resistance: The walls of the bathroom are mostly paved with ceramic tiles, in order to keep them clean and bright, multi-functional stain remover can be used for cleaning; For tile gaps, you can first use a toothbrush dipped in a little detergent to descale, and then brush a waterproof agent with a brush in the gap. This prevents not only seepage, but also mold growth.

The overall space is moisture-proof: As the space with the most moisture, the most fundamental way to prevent moisture and mildew in the bathroom is to keep it ventilated and dry. However, in the "back to the south", it is not advisable to open the window for ventilation, which will bring in the outdoor moisture, and the best way is to turn on the dehumidifier or air conditioner for forced dehumidification.

The bathroom is an essential design in modern homes and plays an important role in life. The function of the toilet is not only washing, defecating, bathing, but also washing, washing mops and some storage functions. For the decoration and construction of the bathroom, special attention should be paid to the selection of some facilities and the quality of decoration, so as to achieve the purpose of beauty, practicality and comfort.

What are the precautions for the decoration of the bathroom? This question is indeed the most frequently asked question by netizens. The bathroom is also the most important space in the decoration, and it is also the one with the most problems.

Then the specific precautions are as follows

1. Spatial pattern planning.

Space planning is the top priority of the restroom. There are generally two types of toilet space.

Second, the water circuit point.

Be sure to leave two sockets next to the bathroom cabinet. In the future, it can be used as a hair dryer and electric toothbrush to recharge.

Leave a power supply behind the mirror of the bathroom cabinet to facilitate the installation of a smart mirror in the future.

It is more convenient to choose a smart toilet after reserving a socket on the back of the toilet.

The ceiling is reserved for the line of bath bombs.

It is best to install a retractable faucet next to the toilet bowl to flush the toilet.

3. Waterproof and waterproof engineering.

The waterproofing of the toilet is. Top priority. The overall waterproofing of the bathroom needs to be done twice, it is best to choose flexible waterproofing, the shower area is painted to a meter height, the area of the wash basin is waterproof and painted to a meter height, and the other areas can be turned 30 cm from the ground.

Fourth, the choice of tiles.

Due to the perennial water consumption of the bathroom, when choosing tiles, we try to choose all-porcelain tiles. In order to increase the service life of ceramic tiles, at the same time, all-porcelain tiles can better reflect the taste of a bathroom in terms of texture and grade.

In short, the above points are the most important aspects of bathroom decoration, if you are about to decorate your home, please read the above carefully.

The bathroom should be separated as much as possible. The benefit of functional area separation is that each function can be used separately without being disturbed, and the use efficiency of the entire bathroom is improved.

Bathroom decoration should first pay attention to the direction of the water pipe, as well as the use of the sewer pipe to reasonably arrange the use of the sinking bend, as well as the size of the pipe selection, and finally the waterproof, this is the most important, after all, the bathroom water is the most frequent place.

Pay attention to the problem of waterproofing, pay attention to the problem of switch, etc. If the waterproof is not done well, it will leak, and the improper installation of the switch position will affect the later use.

Bathroom decoration construction needs to pay attention to waterproofing and circuit problems. The waterproof must be made more than 1 meter high, and the circuit must ensure that the electrical appliances with a larger voltage can be used.

In the bathroom decoration, one of the most important things to pay attention to must be the waterproof of the bathroom, the waterproof of the bathroom I think it is best to paint the entire bathroom with sunscreen, because we will take a bath in the bathroom in the future, and the water seeping into the wall will also make the wall crack or even moldy, and the outer wall of the bathroom also needs to be coated with waterproof, but also to prevent mildew in the future.

The decoration of the bathroom should pay attention to moisture-proof and ventilation, after all, the bathroom is often a lot of water vapor, and then there is the design of the floor, which should not only be non-slip but also tilted, so as to facilitate the flow of water to the sewer.

The construction of the wall joint needs to be paid special attention, if it is not treated well, it is easy to crack the colloid, and eventually cause water leakage.