What should I do if my iPhone has a WiFi failure to connect?

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

Hello, I have been to an Apple mobile phone repair outlet near Qingyang District, the specific address: Room 04, 23rd Floor, Taifeng International Plaza, No. 29, Section 2, Renmin Middle Road, Qingyang District, Chengdu, you can take your equipment to see, I hope it can help you.

The problem I'm having is not bad at all as you described, but I've got it done now :

Explore: I've called Apple's national customer service, but the way they gave me was to restore my phone. I told the customer service that I had done more than 4 times on my phone in Settings-General-Reset, and I always showed that I could not scan when I was connected.

The second trick, the customer service told me to use the computer to restore the phone to the factory state, connect the phone to the computer, use iTunes to open your phone, and first back up everything in the phone to the computer. After the backup, click the version-restore button, and the phone will be automatically restored, which will take about an hour.

After the phone is restored, everything in the phone is there, except for the basic functions, the same as when you bought your mobile phone, and then click the restore button to put all the original backup things on the phone.

In this way, the phone is the same as before the original restoration, my phone still has no wifi and can't find wifi5, groped for 3 days, I have mobile phone settings - general - restore - restore network settings, this time it was successful, found wifi so I summarized that first use the computer to back up the mobile phone, restore, and then restore, the mobile phone is normal and then operate again in the mobile phone device - general - restore, so it is successful. I only talk about my experience, I hope it will be useful to you.

Method steps.

1. Find the wifi settings on your phone, click "Ignore this setting", cancel the original settings, and then reconnect to the network.

2. There is also a common method: restore network settings. Select "General" - Reset Network Settings.

3If the upgrade can't solve this problem, then the second method is simple Change to a new router, choose a wireless router that can be compatible with the wifi chip of the Apple mobile phone, change the router, search the network again, enter the password to test the use, if the effect is stable, it means that the problem has been solved.

Summary. Why can't the iPhone connect to wifi? What to do if you can't connect to the wireless network.

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Other Networks].

2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is refused, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails. Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

What's going on with the iPhone not connecting to wifi.

Why can't the iPhone connect to wifi? How to deal with the situation that the mobile phone cannot connect to WLAN (Wi-Fi) normally when you can't connect to the wireless network is as follows: 1. After turning on the wifi, the wireless network cannot be scanned, and others can search for it.

The method of solving the quarrel is as follows: 1) The wifi signal is set to hidden, and you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Other Networks]. 2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is rejected, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection to the buried car is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac]; 2) If the router is faulty, try to restart the router. 3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails.

The solution is as follows: 1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

I hope I can help you, if you are satisfied with my service, please give a thumbs up, and I wish you all the best.

There are several situations where the Apple mobile phone cannot connect to wifi normally: 1. Confirm that the password is entered incorrectlySolution: check whether the password is entered incorrectly or the characters filled in are case-sensitive, and the number of digits entered in the password is too long or too short, and there may be too many wireless network users connected, try to connect later; 2. The solution to the problem of not finding the wireless signal:

The wifi signal is set to hidden, you need to contact the network management to get the wireless signal name, in the mobile phone [Settings] - [Wireless LAN] or [WiFi] - [Other Networks], manually enter the wireless signal name and password connection, if you still can't connect, you can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (This will reset all network settings, including Wi-Fi passwords, VPN and APN settings, Please make sure that the phone is unlocked, not jailbroken, and can be turned on and off normally); If the router is faulty, try restarting the router; 3. Prompt connection to wifi is rejected solution: The router device may have turned on wireless MAC address filtering, it is recommended to contact the network management to add the MAC address of the mobile phone. The MAC address can be viewed in [Settings] - [General] - [About This Mac]; The router is faulty, try to restart the router; 4. After entering the password, the verification failure solution is prompted

Go to your phone's [Settings] - [Wi-Fi] or [WiFi], tap [i] on the right side of Wi-Fi, and then tap [Ignore this network] with [晌武码]; 5. After entering the password, it prompts WPA2 PSK to protect Solution: This prompt is caused by the incompatibility between the mobile phone and the router encryption mode, contact the network management or set the router encryption level through the computer to reduce the WPA WEP level to WPA WEP level, and connect again; If the router is faulty, try restarting the router;

Hello Apple mobile phone can not connect to wifi, it may be caused by the wrong network settings of the mobile phone system, when the apple mobile phone enters the correct wifi password queck, but has not been able to connect to wifi vertically, this situation mostly occurs in the system network connection error. When there is an error in the system network of the Apple mobile phone, we can generally use the shutdown to restart the mobile phone, and after restarting the mobile phone, it may be connected to the wifi signal normally. Or disconnect the currently connected Wi-Fi signal, and then re-enter the password again to connect to the signal to see if it can be connected normally.

If the mobile phone still cannot connect to wifi after the operation of the appeal method, please open the apple mobile phone [settings] - [general] - [restore] [reset network settings] in turn, usually after restoring the network settings, you can generally connect to wifi normally to solve the problem.

Summary. Hello, glad to answer for you. Dear, the Apple phone can't connect to wifi processing; 1. System failure: The iPhone cannot connect to wifi, which may be caused by the wrong network settings of the mobile phone system.

When an Apple phone enters the correct WiFi password but never connects to the WiFi, this situation often occurs when the system network connection is wrong.

Hello, glad to answer for you. Pro-volt pin let pro, Apple mobile phone can not connect to wifi processing; 1. The system is faulty, and the iPhone cannot connect to wifi, which may be caused by the wrong network settings of the mobile phone system. When the iPhone enters the correct WiFi password, but it is never able to connect to the WiFi, this situation often occurs when the system network connection is wrong.

You can use Shutdown to restart your phone. After restarting the phone, the wifi signal can be connected normally. Or disconnect the currently connected wifi signal, and then re-enter the password to connect the signal to see if it can connect normally.

If your phone still can't connect to WiFi after performing the split appeal method, please open ApplePhone Settings General Recovery and Restore Network Settings. Under normal circumstances, after restoring the network settings, you can connect to Wi-Fi normally to solve the problem.

Summary. Hello dear, glad to answer for you.

Answer: The Apple mobile phone cannot connect to wifi because of the error in the network settings of the mobile phone system, you can generally turn off and restart the mobile phone, and press and hold any [volume button] and [power button] at the same time to restart the mobile phone, and after restarting the mobile phone, it will connect to the wifi signal normally;

If the phone still can't connect to wifi, first open the [Settings] of the Apple phone, open [General] after entering the settings interface, and click the [Restore] option on the scrolling interface; Click [Reset Network Settings] and follow the prompts to restore the network, usually after restoring the network settings, you can connect to WiFi normally.

Hello, I have seen your question, and I am sorting out the answer, please wait for a while Oh Dear, hello, I am happy to answer for you what is going on with the Apple mobile phone that cannot connect to wifi Answer: The Apple mobile phone cannot connect to wifi because of the error in the network settings of the mobile phone system, you can generally use the shutdown to restart the mobile phone, and at the same time press and hold either [volume button] button shirt and [power button] to restart the mobile phone, and after restarting the bright and boring mobile phone, it will connect to the wifi signal normally; If the phone still can't connect to wifi, first open the [Settings] of the Apple phone, open [General] after entering the settings interface, and click the [Restore] option on the scrolling interface; Click [Reset Network Settings] and follow the prompts to restore the cluster bend network, usually after restoring the network settings, you can connect to WiFi normally.

Dear, I'm glad to answer for you: What's going on with the Apple phone can't connect to wifi Answer: When you usually use the Apple mobile phone, you may encounter the Apple phone can't connect to the wifi, it may be caused by the error of the mobile phone system network settings, you can generally use the shutdown to restart the phone, and at the same time press and hold any [volume button] and [power button] to restart the phone, after restarting the phone, it will connect to the wifi signal normally; If the phone still can't connect to WiFi, first open the [Settings] of the Apple phone, enter the posture and mess interface, open [General], and click on the [Restore] trace selection item on the sliding interface; Click [Reset Network Settings], and follow the prompts to restore the network, usually after restoring the network settings, you can connect to WiFi normally