The computer plugged in the system disk does not respond, and the computer has a blue screen, what s

Dear users, hello:

The solution to the computer blue screen is software first and then hardware, and there are generally more software problems.

1. The last correct configuration: press the F8 key before booting up and entering the operating system, select "Last correct configuration" and press Enter.

2. Safe mode: If the "last correct configuration" does not solve the problem, press F8 when you boot up, enter the safe mode, use software such as 360 to repair the system files, and check for viruses.

3. If it can't be repaired, you can enter the safe mode for system restoration.

4. None of the above methods work, and it is recommended to do the following:

Desktop host: 1) Power off, open the chassis, plug and unplug the memory, wipe the gold finger part with an eraser, and plug it back in (don't reverse it).

2) Plug and unplug the graphics card, wipe the gold finger part with an eraser, and reinsert it tightly (the buckle should be buckled).

3) Unplug the power cord, cut off the motherboard button battery, wait three minutes, and then replace the motherboard.

Laptop:

1) Unplug the power cord, remove the battery, open the back cover of the memory, plug in and unplug the memory, wipe the gold finger part with an eraser, and plug it back in (don't reverse it).

2) Unplug the power cord, remove the battery, and press and hold the power button for 30 seconds without letting go.

3) If the fault persists, you can only reinstall the system.

Cause 1: There is a disk error or file error in the system partition of Windows. Solution: Perform a disk scan program to perform a comprehensive inspection of all disk drives to see if there are disk errors or file errors on the disk drives.

Cause 2: The SATA or IDE controller driver of the motherboard is damaged or installed incorrectly. Solution: Reinstall the SATA or IDE controller driver provided by the motherboard driver.

Reason 3: The computer has been attacked by malicious programs such as viruses, Trojans, and rogue software. Solution: Perform a comprehensive check of the computer to see if it has been attacked by malicious programs such as viruses, Trojan horses, and rogue software.

Issue. 1. There is a disk error or file error in the system partition.

Solution: Perform a disk scan program to perform a comprehensive inspection of all disk drives to see if there are disk errors or file errors on the disk drives.

Issue. 2. The SATA or IDE controller driver of the motherboard has been damaged or installed incorrectly.

Solution: Reinstall the SATA or IDE controller driver provided by the motherboard driver.

Issue. 3. The computer has been attacked by malicious programs such as viruses, Trojan horses, and rogue software.

Solution: Perform a comprehensive check of the computer to see if it has been attacked by malicious programs such as viruses, Trojan horses, and rogue software.

Problem 4: U disk poisoning.

Solution: Use a USB flash drive PE tool to repair the USB flash drive.

Hello, this is caused by static electricity.

Static electricity is generated when the USB flash drive is plugged in, so it causes a blue screen or reboot.

Just wipe the electricity with your hand before plugging it in.

When the computer is plugged into the USB flash drive, there is a blue screen situation, and this USB flash drive should come with a kind of protection software, so it cannot be used.

When you plug in the U disk,Just choose to show Nanping, this is normal,You just turn it off and open it again.。

Isn't this just that the USB drive is broken, if the computer is broken, the other USB drive can't be read.

There may be a problem with the system, try another one first, just one sentence, the judgment is not very clear.

First of all, change the USB flash drive socket. If it doesn't work, put the USB flash drive on someone else's machine to see. If it is good, it proves that your system has an abnormal response when receiving the U disk signal, you can change the driver to see, and then it is invalid, you have to reinstall another operating system to see.

I can't help it anymore.