Is it better to have a large natural gas stove or a small one

The stove is known as the "heart of the stove". As the core component of the cooker, the interest of the stove accounts for 1 3 of the total cost, and the difference in the air intake mode of the cooker is related to the safety, power and energy saving of the cooker. The air intake mode of the built-in gas stove is divided into two types: "upper air intake" and "incomplete upper air intake".

One of the best air inlet methods is the upper air intake, "at present, the main domestic use of Italian Sabaf is a professional upward air intake" type burner manufacturer. Experts commented that the stove head in this way has reliable safety - the glass panel will not be tempered by tempering, and it is very clean and beneficial to maintaining a healthy atmospheric environment.

However, the air intake is slightly smaller, and the heat load of the stove head.

It is difficult to meet high standards.

Whether the gas stove is good or not, the key depends on the stove. The stove is known as the "heart of the stove". As the core component of the cooktop, the cost of the stove accounts for 1 3 of the total cost. The difference in the air intake mode of the stove is related to the safety, power and energy-saving performance of the cooker.

The material of the burner is mainly made of stainless steel, cast iron and copper forging, because the burner is grilled for a long time, it is easy to deform, so the material and thickness of the burner are very important, and the heavier the burner the better.

Experts conclude that copper burners should be the preferred choice for consumers, and their advantages are:

1. Copper has good thermal conductivity, good heat dissipation, high thermal efficiency, and is not easy to produce tempering. However, the thermal conductivity of aluminum alloy is not good, the heat dissipation is poor, and the thermal efficiency is also reduced, which is easy to cause tempering, and the CO content is relatively high during combustion.

2. Due to its inherent corrosion resistance, the copper stove does not need to be protected by the oxide film on the surface, and is durable. Aluminum alloys, on the other hand, are usually coated with an Al2O3 protective film on the surface to prevent corrosion. However, in the kitchen, it is often exposed to salts, etc., so that the protective film on the surface is easy to be damaged by corrosion, and corrosion spots appear on the surface, which affects the appearance and reduces the service life.

3. The melting point of copper is as high as 1083 degrees, even under the condition of high firepower, it is not easy to be melted and deformed, and the service life is effectively improved. The aluminum alloy has a low melting point, less than 600 degrees of fumigation flow, and is easy to turn black and melt under high temperature for a long time, which greatly shortens the service life of the stove, and because of the integrated design of the stove, when the stove head is melted and replaced, it needs to be replaced as a whole, which has been confirmed from the long-term use of consumers, which is a major disadvantage of the aluminum alloy stove.

4. In addition, the copper stove head has good material, heavy weight, high grade and beautiful appearance.

There are no consequences, just use it with confidence. Or it's convenient to use natural gas.

Natural gas is different from liquefied gas, and the same pore size will make the combustion of natural gas have a smaller flame and cook slower.

1. The size of the firepower of the gas-saving stove is generally adjusted by turning the knob on ignition.

2. The damper under the gas stove is one left and one right, and the one on the right is to adjust the outer fire ring; The one on the left is the one that adjusts the inner fire ring.

Third, and then the gas main valve, don't open it to the end, just open more than half of it, and it is more gas-saving.

Fourth, there is also the need to change the nozzle.

Let's see what others have to say.

It is particularly important to choose a satisfactory gas stove, how to choose a gas stove with high power and durability? It can be examined from the following aspects:

One is the panel. The most common panels on the market are mainly: stainless steel, ceramic, tempered glass. Stainless steel and glass panels are the most common. The stainless steel material is strong, not afraid of impact, and is durable. The tempered glass has a relatively high appearance, and the oil stain is clean as soon as it is wiped.

The second is the material of the stove. There are four types of metal used in the furnace on the market: copper, aluminum, steel, and iron, among which copper is the best and most durable.

Copper burner head, durable, not easy to deform, no rust, good thermal conductivity. After the stove is burned for a long time, it will not be easily deformed at high temperatures. Therefore, the material and thickness of the hearth are very important, in general, the heavier the hearth, the better, and the weight can be weighed when purchasing.

The third is the flame-out protection device. The flame-out protection device is a safety protection device that automatically closes the gas valve when the gas stove encounters an accidental flame-out, if the fire is blown out by the wind or the fire is extinguished by cooking porridge overflowing, the flame-out protection device will close the gas valve to prevent a large amount of gas from leaking into the room to cause poisoning or fire accidents.

Fourth, the type of gas source. Different styles of gas stoves correspond to different gas sources, which are mainly divided into liquefied petroleum gas, natural gas, and artificial gas. Different gas sources have different air pressures, and the matching gas valves, nozzles, etc. are also different, and different gas sources cannot be used universally, so before buying a gas stove, you must first ask what the gas source is the gas company's own.

Schindler is a joint-stock enterprise focusing on the research and development, production and sales of kitchen appliances, and is one of the top ten gas appliances enterprises in China. In 1984, Schindler gas stoves developed the first generation of screvice hole swirl combustion technology, and on August 24, 2019, at the Schindler Kitchen Appliances Global Marketing Summit, Schindler Kitchen Appliances officially launched the 7th generation of swirl combustion technology, Schindler gas stoves have always been synonymous with fierce stoves.

At present, the largest gas stove on the market is the Houston blast gas stove, which has a fire power of 23% higher than the first-class energy efficiency stipulated by the state, and a thermal efficiency of 67%, which is truly specially designed for stir-frying. The principle is that the blast stove is equipped with a microcomputer-controlled blower, which can automatically match the air volume according to the gas situation, so the combustion is sufficient, the fire is fierce, and the temperature is high.

It is recommended that you buy the Qianfeng Q701-X gas stove, this gas stove breathes fire with an innovative patented seven-cavity, which can reach a strong firepower of 4200W, realizing "the fire is fierce enough, and the stir-fry is more vigorous; The low heat is stable enough, and the soup is more fragrant; Steaming over medium heat, no loss of nutrients", to meet the requirements of different food cooking methods and different dishes. This gas stove is also an energy-saving stove that has reached the national first-class energy efficiency, so you don't have to worry about gas and time.

There are air control valves for both large and small fire rings, and if you move the small control valve of the inner fire ring to turn the flame blue, the flame will not go out when it is at its highest.

Changing a gas stove to natural gas requires the following two components.

Burner Because the fire cover of the gas stove has a small fire hole, the natural gas nozzle should be larger, and the diameter of the nozzle should be smaller.

Notes:1If it is liquefied gas or pipeline liquefied gas, you can simply enlarge the nozzle inlet diameter.

2.If it is biogas in the pipeline, you need to change the nozzle to make the air inlet smallerAfter the nozzle is replaced, it is best to seal the thread between the nozzle and the burner with sealant to prevent slight air leakage at the thread, or the thread will loosen due to vibration in the future.

4. After replacing the nozzle, the damper of the stove head is adjusted accordingly to make the gas stove in the best working condition.

The gas stove is changed to natural gas**, the gas stove can also be changed to natural gas, and now you can be crowned with this popularity if you don't change it, but this bottle is too small, and it is best to use the original pipe

Actually, it's not a big deal, it's just a matter of changing your mouth.

Can gas stoves and gas stoves be used together?

Looking at the gas nozzle, the small one is liquefied petroleum gas, and the big hole is coal gas.

Because the gas pressure is small.

Yes, but Schindler's professional after-sales replacement related parts are required. Although the left burner of this stove is a little smaller than the right burner, the difference in home cooking is not very big, and the modification is not very suitable economically.