What is the reason why Joyoung smart rice cooker can t cook rice?

Reason 1: Poor contact.

If the contact switch is faulty or deformed, the contact conductivity is impaired and the contact is poor, and eventually the rice cooker is kept warm without heating, so that the rice cannot be cooked.

Reason 2: The thermostat loses magnetism. As a result, the water does not turn on when the rice cooker is cooking, or the switch jumps automatically repeatedly, and the rice will naturally be difficult to cook.

Reason 3: Fever.

There is a foreign body in the disk. As a result, the heating plate cannot be fully contacted with the inner tank, which will affect the normal cooking of rice, and foreign objects can be removed.

The difference between a rice cooker and an electric pressure cooker, the difference between pressure The biggest difference between a conventional rice cooker and an electric pressure cooker is reflected in the pressure. The pressure of the rice cooker uses conventional pressure, which belongs to low-pressure cooking, and it is enough for cooking rice and porridge, but due to the limited pressure, it is not very suitable for stewing meat and soup, and the performance in efficiency and taste will not be too good.

The electric pressure cooker neutralizes the advantages of rice cookers and electric pressure cookers, and the pressure is relatively high-pressure cooking, which can cope with cooking rice, stewed soup, stewed meat, porridge and other cooking without pressure, and the efficiency will be higher.

Joyoung rice cooker cooker cooks rice that is undercooked, sandwiched:

Choose the right function: you can choose to cook rice, fast cooking rice, firewood rice and other functions, if you choose the steaming function, there will be a phenomenon of undercooked rice, the steaming function can put the steaming drawer on the inner tank, add water, hot buns, steamed buns, corn, sweet potatoes and other ingredients.

Correct rice-to-water ratio: The rice-to-water ratio for cooking rice should be 1:1 or; To cook porridge or porridge, the ratio of rice to water is 1:

6 or 1:7. It is recommended to use the measuring cup that comes with the machine, measure a few cups of rice from the measuring cup, and add water to the corresponding number of scale lines.

If you add 2 measuring cups of rice, clean it and put it in the inner tank, and add water to the position of the rice scale mark "2".

Rice cooker food is undercooked: There are four reasons for undercooked food, which can be eliminated one by one.

1. Check whether the function button is selected correctly (press the function button for cooking rice, and the corresponding function button should also be selected for porridge and soup), if the brown rice is used, it is recommended to add 10% more water to operate.

2. Check whether there are foreign objects on the surface of the heating plate and the bottom of the inner tank, which need to be removed, and rotate the inner tank in the rice cooker to make it fully contacted.

3. Is there any cooking after cooking? (After cooking, simmer for about 10 minutes, otherwise the effect will be affected).

4. Do you often open the lid during the stewing process? (Opening the lid frequently will also affect the effect).

1) The deformation of the temperature control switch is not flexible and there is a phenomenon of stuck.

Solution: Repair or replace with a new one.

2) The heating plate is deformed, and the surface of the heating plate cannot be closely attached to the bottom of the pot when cooking rice after the heating plate is deformed, and a gap is formed, so that the heat cannot be transmitted, but it is transmitted to the magnet, causing the water to trip before it is opened.

Solution: Check, remove the pot to see if the heating plate is deformed, if the deformation can not be repaired, buy a new one and replace it.

3) The deformation of the bottom of the pot, the principle of cooking uncooked rice due to the deformation of the bottom of the pot is the same as the deformation of the heating plate and cooking the uncooked rice, but the probability of its failure is common, and it is caused by excessive force when taking rice or brushing the pot.

Solution: Put the pot body on the heating plate, gently knock on the uneven part of the bottom of the pot, and find a way to make the bottom of the pot close to the surface of the heating plate, and the fault can be eliminated.

I bought a new Joyoung rice cooker in Changde Huaxing Electric Appliances, and I cooked it 4 times and I didn't cook it, and I said that I wouldn't change it for 15 days. Huaxing is too pit people, and Jiuyang is garbage.

Hello, I'm glad to answer for you, my home is this brand. Basically, it's okay. You see if you have less water, or if this situation is often the case, whether there is a problem with the quality of the rice cooker you bought, you can take it to a repair shop for repair, if it is within the warranty range, you can replace it with a new one.

Look at whether the program is wrong, if you steam rice, it is recommended to choose soft and glutinous texture.

If it still doesn't work after a long time, it is recommended to go to the after-sales service to take a look.

Summary. 1. Poor contact. If the contact switch is faulty or deformed, the contact point conductivity problem and poor contact phenomenon will eventually cause the rice cooker to be kept warm all the time without heating, and then the rice cannot be cooked; 2. Demagnetization of the thermostat.

As a result, the water does not boil when the rice cooker is cooked, or the switch key keeps jumping automatically, and the rice is naturally difficult to cook; 3. There is a foreign body in the hot plate. As a result, the hot plate cannot be in sufficient contact with the inner tank, which will affect the normal cooking of rice, and the foreign body can be removed.

What is the reason why Joyoung rice cooker cooker is undercooked?

Can you tell us more about that?

1. Poor contact. If the contact switch is faulty or deformed, the contact point conductivity problem and poor contact phenomenon will eventually cause the rice cooker to be kept warm all the time without heating, and then the rice cannot be cooked; 2. Demagnetization of the thermostat. As a result, the water does not boil when the rice cooker is cooked, or the switch key keeps jumping automatically, and the rice is naturally difficult to cook; 3. There is a foreign body in the hot plate.

As a result, the hot plate cannot be in sufficient contact with the inner tank, which will affect the normal cooking of rice, and the foreign body can be removed.

Abstract 1The reason why the rice cooker does not heat may be that the fuse resistor is burned out, and the fuse resistor of the rice cooker may be burned out because there are foreign objects on the bottom of the pot or the heating plate, so that the inner pot of the rice cooker cannot fully contact the heating plate, if the temperature of the heating plate is too high, it will cause the fuse resistor to burn out, but at the same time, it protects the heating plate of the rice cooker.

2.If you do not pay attention to the use of the rice cooker, the inner pot will be deformed or the heating plate will be deformed, which will also cause the temperature to remain unchanged.

Hello, I have seen your question and am sorting out the answer, please wait a while 1The reason why the rice cooker does not heat may be that the fuse resistor is burned out, and the fuse resistance of the rice cooker may be burned out because there are foreign objects on the bottom of the pot or the heating plate, so that the inner pot of the rice cooker can not fully contact the heating plate, if the temperature of the heating plate is too high, it will cause the fuse resistor to burn out, but at the same time, it protects the heating plate of the rice cooker 2If you do not pay attention to the use of the rice cooker, the inner pot will be deformed or the heating plate will be deformed, which will also cause the temperature to remain unchanged.

Summary. 1. The reason why the rice cooker does not heat may be that the fuse resistor is burned out, and the fuse resistance of the rice cooker may be burned out because there are foreign objects on the bottom of the pot or the heating plate, so that the inner pot of the rice cooker can not be fully in contact with the heating plate, if the temperature of the heating plate is too high, it will cause the fuse resistor to burn out, but at the same time it protects the heating plate of the rice cooker, carefully check the foreign body at the bottom of the rice cooker or the foreign body on the heating plate, remove the foreign body and clean the bottom of the pot or the heating plate, and be careful not to throw off the fuse resistor. The bimetal sheet used to keep the heat of the rice cooker is accidentally adhered to the contacts, which is easy to cause the fuse to be burned out due to continuous heating, so pay attention to replacing the bimetal sheet.

2. If you do not pay attention to the use of the rice cooker, resulting in the deformation of the inner pot or the deformation of the heating plate, it will also cause the temperature to be too high, which will cause the insurance to be burned, if this is the case, you should carefully trim the inner pot of the rice cooker to restore the original state, and the repaired inner pot can still be used, but the heating plate that has been deformed can not be used, and it should be replaced with a new one 3. The heating plate of the rice cooker is in an open circuit state, which will also make the rice cooker unable to heat, and it should be carefully checked and maintained.

This question is from me, it takes a little time to type, please wait patiently 1. The reason why the rice cooker is not heated may be that the fuse resistor is burned out, and the fuse resistance of the rice cooker may be burned out because there are foreign objects on the bottom of the pot or the heating plate, so that the inner pot of the rice cooker can not fully contact with the heating plate, if the temperature of the heating plate is too high, it will cause the fuse resistor to burn out, but when it hits the same potato, it protects the heating plate of the rice cooker, and it is necessary to carefully check the foreign body at the bottom of the rice cooker or the heating plate, Remove the foreign matter and clean the bottom of the pot or heating plate, and be careful not to shake off the fuse resistor. The bimetal sheet used to keep the heat of the rice cooker is accidentally adhered to the contacts, which is easy to cause the fuse to be burned out due to continuous heating, so pay attention to replacing the bimetal sheet. 2. If you do not pay attention to the use of the rice cooker, resulting in the deformation of the inner pot or the deformation of the heating plate, it will also cause the temperature to be too high, which will cause the insurance to be burned, if this is the case, you should carefully trim the deformed inner pot of the rice cooker and restore it to its original state, and the repaired inner pot can still be used, but the heating plate that has been deformed can not be used, and it should be replaced with a new one 3. The heating plate of the rice cooker is in an open circuit state, which will also make the rice cooker unable to be heated, and it should be carefully checked and repaired.

Hello, the reasons why the Joyoung rice cooker is not cooked well: 1. Whether the sensor is faulty and the temperature sensor is damaged, you can go to the after-sales service store for repair, or replace it with a rice cooker. 2. Check whether the function key is selected correctly to cook rice and press the function button for cooking, and the corresponding function button should also be selected for porridge and soup, such as the brown rice used, it is recommended to add 10% more water to operate.

3. Whether there is a foreign body on the surface of the Sakura heating plate and the bottom of the inner tank, if there is a foreign body, it needs to be removed, and the inner tank can be rotated in the rice cooker to make it fully contacted. 4. Whether there is a stew after the end of cooking The rice needs to be stewed for about 10 minutes after the end of cooking, otherwise the effect will be affected, and it is also necessary to pay attention to whether the lid is often opened during the stewed rice.