Joyoung soymilk machine beeping alarm, Joyoung soymilk machine keeps honking what s going on?

The machine can be inspected as follows:

1. If there is an alarm within 10 minutes, it is related to the water level and water temperature, please check whether the water in the cup is between the upper and lower water levels; Did you add water over 70 degrees Celsius?

2. If the alarm is given after ten minutes, it is related to the placement of the material, if the material is not easy to foam, it will cause this phenomenon, please add it according to the ratio of the manual; In addition, it is necessary to check whether there is a plug-in power supply in the process of work rights, and whether the coupler is plugged tightly; If there is no problem, you can contact the after-sales service for inspection.

Joyoung will say that the water has entered and then will say that the motherboard and the motor should be replaced together Then it will say that it will cost more than 100 yuan and then you love to repair it yourself If you want to find a good one after sales, it must be Haier.

Hello, long sound alarm, please check 1, whether the temperature of the water added is too high, if it is higher than 70 degrees, there will be such a situation; 2. If the amount of water added is too small, please add it between the two water lines; 3. If the bean material is added too little, please follow the recipe; 4. Whether there is secondary pulping. 5. Whether the head part is flooded during the cleaning process.

See if the bottom of your soy milk maker pot is.

If there is a short circuit or water at the bottom, wipe it dry.

Or the bottom of the pot is pasted and the paste is removed.

It should work fine.

It is estimated that it is flooded, so it is best to get it after sale! It doesn't matter if there is an invoice, (Joyoung is to recognize the goods and not recognize the person) as long as the goods are true, it is free to repair during the one-year warranty period, if someone embarrasses you after the sale, you will say that the machine is sent by the unit, and it will be fine.

Joyoung's is not good! Recommend backgammon, you can look at the next backgammon when you have time, it is estimated that you bought backgammon, and you don't have to worry about repairing without an invoice. Because backgammon charges are very low.

The motherboard is out of order!! Let's find after-sales service!! No invoice to find after-sales money to repair it!

This can also happen when you put more beans and less beans.

Hello 1, just power on or alarm within 10 minutes:

Hello, this is the alarm that the machine detects the inappropriate amount of water, you need to check whether the water added by the machine reaches the highest and lowest water level inside the cup, and the water temperature should not exceed 70 when operating, because the working program will be heated and cooked, and the high temperature of the water will affect the temperature detection, resulting in an alarm prompt, which can be replaced with cold water operation.

2. Call the police after 10 minutes

This situation is related to the function of adding and selecting ingredients, if the ingredients are not easy to foam, it will cause this phenomenon, it is recommended to re-test the machine according to the amount added in the manual.

If you can't guide the exclusion, guide the after-sales treatment.

1. Just energized or alarm within ten minutes: Hello, this is the alarm that the machine detects that the water volume is not suitable, you need to check whether the water added by the machine reaches the highest and lowest water level inside the cup, and the water temperature should not exceed 70 during operation, because the working procedure will be heated and cooked, and the high temperature of the water will affect the temperature detection, resulting in an alarm prompt, which can be replaced with cold water operation. 2. Call the police after 10 minutes

This situation is related to the function of adding and selecting ingredients, such as ingredients that are not easy to foam, it will cause this phenomenon, it is recommended to re-test the machine according to the amount added in the manual, if it cannot be guided, exclude, guide after-sales treatment.

It's the reason above.

Hello, long sound alarm, please check 1, whether the temperature of the water added is too high, if it is higher than 70 degrees, there will be such a situation;

2. If the amount of water added is too small, please add it between the two water lines;

3. If the bean material is added too little, please follow the recipe;

4. Whether there is secondary pulping.

5. Whether the head part is flooded during the cleaning process.

If the above situation has been ruled out, it is recommended that you take the machine to the nearest Joyoung after-sales outlet for maintenance.

Joyoung soymilk machine has been chirping, under normal use to see if the water is insufficient and does not meet the standard, if the water level reaches the standard, it may be that the probe is out of order or the motherboard is faulty and needs to be repaired by professionals.

Joyoung soymilk machine keeps tweeting I may be in bad contact, so I have to repair it and then use the cover safely.

Summary. Dear, hello, a blessing, a warmth, a touched, with a grateful heart, life is moved, your question has been received, typing takes some time, please wait a while, please do not end the consultation, you can also provide more effective information, so that I can better solve your problem, immediately for you to sort out the answer please wait a while!

Joyoung soymilk machine keeps calling the police, what's going on.

Dear, hello, a blessing, a warmth, a touched, with a grateful heart, life is moved, your question has been received, typing takes some time, please wait a while, please do not end the consultation, you can also provide more effective information, so that I can better solve your problem, immediately for you to sort out the answer please wait a while!

Dear, hello, I'm glad to answer for you what happened to Joyoung soymilk machine has been alarming Hello. The reasons for the continuous alarm of Joyoung soymilk machine: First, there will be sound and light alarm after the soymilk is beaten; Second, there will be an alarm if there is no dry boiling Third, there will be an alarm if the machine is damaged.

Dear, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Nowadays, every household basically has a soymilk machine, but it is inevitable that there will be some failures after using it for a long time, so what is the reason why the Joyoung soymilk machine keeps ringing? What problems should I pay attention to when using a soymilk machine?

The reasons why Joyoung soymilk machine keeps ringing are generally the following reasons:

1. It may be that the body of Joyoung soymilk machine is accidentally soaked in water, and then it can be dried thoroughly;

2. When the Joyoung soymilk machine is dry burned or the water in the cup is too low, it will stop working and make a sound;

3. The raw materials in the cup of Joyoung soymilk machine are not spread flat, resulting in the sound of soymilk machine;

4. The liquid level sensor of Joyoung soymilk machine.

If there is damage, it needs to be repaired in time.

What problems should I pay attention to when using a soymilk machine?

1. In the head of Joyoung soymilk machine, do not soak in water, otherwise it is easy to cause problems with internal components.

2. Before grinding soybean milk, you need to add beans and raw materials to Minxi, and then add water, and the amount of water should be higher than the water line, but not higher than the water line.

3. After every use of the soymilk machine, you need to clean up the capacitors, anti-overflow electrodes, and sensors.

Regarding what is going on with the Joyoung soymilk machine ringing all the time, and what problems should be paid attention to when using the soymilk machine, the quality of the Joyoung soymilk machine is still quite good, but it is necessary to pay attention to the daily maintenance and use of the hand crack, so that the life of the use is longer.

The common faults of Joyoung soymilk machine include the failure of the beans to break, the failure to cook, the failure to alarm in advance, the failure of burning, the failure of silent and lightless after power-on, and the failure of not heating.

First, the beans are not broken

When using it, many users often find that the soymilk made by the soymilk machine tastes bad and is relatively rough, and many people will attribute this phenomenon to the quality of the soymilk machine. As everyone knows, this is a phenomenon caused by a small malfunction in the soymilk machine. In the event of this kind of failure, it is generally necessary to consider that there is a problem with the filter screen of the soymilk machine.

Second, it is not cooked, and the alarm fault is in advance

Obviously, the soymilk is not cooked, but the soymilk machine alarms in advance to remind that such a failure is not only a problem with the soymilk machine itself, but also may be caused by incorrect operation. For example, if the beans have been soaked in water for too long and have deteriorated, the safety identification function of the soymilk machine itself will send out a safety alarm function to remind the user. Or due to adding too much water, the load of the soymilk machine is exceeded, making the soymilk machine unable to work.

3. Burn failure

In fact, when the soymilk machine is burned, it may be that the heating tube of the soymilk machine is cleaned with the heating tube of the soymilk macro trembling machine, and the heating tube of the soymilk machine needs to be cleaned. In addition, using mung beans alone to make soy milk may also cause such a failure, so it is best to add peanuts or soybeans to mix it together to solve this problem.

FourthAfter powering on, there is no sound and no light failure

After confirming that there is no problem with the power supply of the outer hole including the power cord, unplug the power cord and measure the resistance i between the power coupler L and the N copper sheet to about ohms. If it is not normal, it is a primary fault of the power coupler or transformer; If it is normal, then disconnect the connection between the motor M and the heating element H and the circuit, and test whether the rectifier filter and voltage stabilizing circuit is normal when energized.

Fifth, no heating failure

Start the working program after powering on, pay attention to whether there is a relay suction sound when the program enters the heating process, if so, check the heating element after the power failure. If the heating element is normal, disconnect the heat pipe H from the circuit, and check whether the relay K2 contact is normal. If there is no relay engagement sound, check whether the 2 pins of U1 have a voltage of about +5V, and check whether R13, Q2, K2, D6, R15, and C15 are normal.

It is the fault of the circuit board, at this time, the user can check whether the relay is still engaged when the program enters the heating process after power-on, and at the same time, you can also check whether the heating element shell and the anti-water shortage sensor are faulty, and whether the connection between the two is normal. Because this can also happen if the connection is not normal. At this time, it is recommended that you ask a professional maintenance personnel to repair it.

The soymilk machine keeps ringing, and the user should first check whether the operation is correct. This situation will occur if some consumers add too much water to the soymilk machine or put too many ingredients in the soymilk machine during the operation. Therefore, it is necessary to check whether the water is added between the upper and lower water level scale lines, and generally do not exceed this water level when adding water, because the soymilk machines have an anti-dry burning alarm system, if the water level is not suitable, the machine will keep chirping to remind the user.

The water temperature is too high after stopping (the soymilk machine has a temperature sensor, and the water temperature will be detected when it starts), and the water temperature is not normal after adding some water. Moreover, when beating soy milk, do not add water halfway or stop and then start, it is easy to stick to the pipe or overflow, which is not good for the heating pipe. It is recommended to pour it back and play again.

The next time you pour water, follow the instructions and you won't chirp.

If there is a long beep alarm after working for a period of time, there is no problem with the user's operation, probably because the local weather is relatively humid, it is recommended that you can dry the machine head in the sun, try the machine, if not, you can only contact the after-sales maintenance.

Please check: 1. Whether the temperature of the added water is too high, if it is higher than 70 degrees, this will happen;

2. If the amount of water added is too small, please add it between the two water lines;

3. If the bean material is added too little, please follow the recipe;

4. Whether there is secondary pulping.

5. Whether the head part is flooded during the cleaning process.

Joyoung soymilk machine indicator light is not on, it turns out that maintenance is so simple.

Hello, if it is a long alarm for a period of time, there is no problem with the user's operation, the local weather is relatively humid, it is recommended that you can dry the machine head in the sun, try the machine, if not, you can only contact the after-sales maintenance.

The long beep of the soybean milk machine is designed for the alarm function, and some are used for waterless alarm. Some are spill-proof alarms. Or the machine itself is caused by a short circuit in the internal circuit due to moisture, and the fault occurs.

When the water of the soymilk machine is boiled to 83 °C, the microprocessor starts the motor to pulp. The water heating motor of your soymilk machine does not run and beats, but a long beep alarm, it may be that there is something wrong with the motor control circuit, or it may be that there is something wrong with the temperature control circuit, please go to the after-sales service for maintenance.

Hello, there are several reasons for the soymilk machine's long alarm, first, the water is not added to the standard water level of the soymilk machine; second, water ingress into the nose; Third, the temperature sensor of the soymilk machine fails. Generally speaking, if your soymilk machine is normal before, then the first and second situations mentioned above can be ruled out, most of the alarm situations are caused by water ingress into the machine head, it is recommended that you directly find the local after-sales service personnel to help you take a look!

1. Just power on or alarm within 10 minutes:

This is the machine to detect the water volume is not suitable alarm, you need to check whether the machine water is added to the cup between the highest and lowest water line, the water temperature should not exceed 70 during operation, because the working program will be heated and cooked, the high temperature of the water will affect the temperature detection, resulting in an alarm prompt, can be replaced with cold water operation.

2. Call the police after 10 minutes

This situation is related to the function of adding and selecting ingredients, such as ingredients that are not easy to foam, it will cause this phenomenon, and it is necessary to re-operate according to the amount added in the manual.