What should be done with moldy furniture, how to deal with moldy furniture

Sometimes it took a lot of effort to buy back the furniture soon began to mold, this time to pay attention to, the reason for the furniture mold is mainly determined by the indoor temperature, if the humid environment for a long time, the furniture will soon cause mold, this is a certain probability, if you want to make the furniture not moldy, you must keep the room dry, when the mold phenomenon opens the window for ventilation, this has to be good, out of the sun, if it is the rainy season, especially in the southern region often rain and south wind days, The indoor will be damp, so it is necessary to close the window, very serious to turn the air conditioner in the dehumidification mode, you can also turn the air conditioner in the heating mode higher than the current temperature, so that the indoor temperature increases, evaporate the moisture, do not remember not to open the air conditioner for a long time, if there is no air conditioning friends can use a pot of charcoal or put some lime powder in the corner, so that you can also absorb the moisture in the air, the furniture will not be moldy again. Then use a dry towel to wipe the moldy surface clean, and then brush with transparent paint to isolate the surface of the furniture from external influences, so that the mold will not be more serious.

If the furniture is moldy, first use a soft brush to clean up the mold on the surface of the furniture, and then, wipe it with a damp rag, and then use an appropriate amount of anti-mildew and antibacterial agent (according to the furniture material with the corresponding anti-mildew and antibacterial agent, such as: textile antifungal agent for fabric, wood antifungal agent for wood, etc.), evenly spray on the surface of the furniture, and wait for drying.

Solid wood furniture itself is not subject to special moisture-proof treatment, and this should be paid attention to during maintenance, and after the solid wood furniture is damp, the changes are obvious, the surface will change color and even breed mildew, and if you do not deal with it for a long time, it will lead to expansion and deformation and cracking of the damp place.

The maintenance of solid wood furniture is more cumbersome, it belongs to high-end furniture, daily maintenance needs special detergents for maintenance, and needs to be waxed regularly, moisture-proof can be put in a pack of activated carbon for dehumidification.

If it is already moldy, you can try to remove it according to the following methods.

1. The mildew on the old wood can be removed with milk, alcohol, ammonia, potassium permanganate, and sodium bisulfite. Caused by the wood absorbing too much water. This is a kind of particleboard or high-density board, high water absorption, this phenomenon is difficult to deal with, wipe off mildew, eliminate water sources, keep ventilation smooth so that it is naturally dry, there is water inside, and it is useless to deal with it outside.

2. You can try to use mold removal spray, which can also be said to be bleach, which is a kind of oxidation bleaching that uses the strong oxidation of hypochlorous acid. Mold and blackening, which is mainly caused by the melanin metabolized by the mold and its mold on the wooden board, the use of detergent is effective, but generally it will also leave more obvious black spots.

1.Remember to keep your home ventilated in the future. Dehumidification is required.

There is a moisture-proof pill supermarket to buy. 2.to the point of furniture.

Apply primer oil 1-2 times. After mopping the ground, you must remember to dry it. Fan air conditioner blow 1 blow.

Don't accumulate water. 3.Regular use of furniture maintenance also.

For example, the liquids of Bylvizo. Keep your furniture away from moisture and maintain its shine.

Wood furniture moisture-proof can be used some absorbent paper or plastic paper on the surface of wooden furniture. And for leather sofas, you can put some desiccant to keep them dry.

Due to the large number of household items, it is difficult to concentrate on moisture-proof in each piece, and the most important thing is to do a good job in the moisture-proof protection of the home environment. When the air is humid, do not open the windows to breathe, and remember to close the windows tightly, especially those facing south and southeast, and in the morning and evening when the air humidity is highest. However, if you feel that the indoor air cannot circulate, you can open more doors and windows at noon and in the afternoon.

Dehumidification tips】] 1 Moisture absorption box and moisture absorption bag Moisture absorption box is mostly used for moisture absorption of wardrobes and shoe cabinets, generally containing calcium chloride particles, most of which also add flavor, so it integrates dehumidification, aromatic, anti-mildew, deodorization and other functions. In addition to drying clothes, moisture absorbent bags can also be used to dehumidify leather goods, books, cameras, computers, discs, etc. It works well if placed in a confined space.

2. Charcoal dehumidification method Charcoal dehumidification is the most popular moisture-proof method nowadays. You can add water to boil the black charcoal for 10 minutes in advance, filter out the water, ventilate and dry it, put it in a breathable basket for two days, and put it in the diagonal position in the house. Put 5 to 10 kg in each room.

Charcoal** is cheap, and it can be reused after drying, which is economical. 3. Newspaper anti-mold method This method is suitable for confined small spaces, such as wardrobes, shoe cabinets, etc. For example, at the bottom of the closet, the inside of the cabinet door can be covered with newspaper, which not only absorbs moisture, but also repels insects from the smell of ink on the newspaper.

You can also stuff your wet shoes with newspaper to absorb water and keep them out of shape.

In the case of moldy solid wood furniture, you can first use a clean soft cloth dipped in a neutral detergent or a special furniture cleaner to remove it. Then lightly apply a layer of furniture wax or essential oils to the musty area, and place a bar of soap or a gauze bag filled with sun-dried tea residue in the musty area to help eliminate the musty smell.

**For taller fabric sofas, use a special vacuum cleaner to suck up the dust on its surface. In humid weather, use a hair dryer to gently blow the sofa to remove moisture from the sofa.

For the spots of wrought iron furniture, it is necessary to make up in time. Wrought iron homes should be scrubbed frequently with a damp cloth and mild detergent. Try not to use it in a humid environment, and pay attention to waterproof and moisture-proof, if you find that the surface is faded and spotted, you should repair and paint it in time to avoid affecting its overall appearance.

After the cold wall comes into contact with the warm air indoors, the huge temperature difference will create a thermal bridge, which will cause condensation, dampness and even dripping on the interior walls of the house, and slowly the damp walls will become moldy. In order to really deal with the wall, you have to start from the root, for example, rely on the moldy wall of the kitchen, and find a professional plumber to suppress the water pipe, find out the specific pipe leakage, and then make the latex paint on the wall from scratch. The damp and moldy walls of the home are generally because the water vapor in the room is too heavy and does not receive direct sunlight, when this happens, we can use a useless dry toothbrush to brush off the mold stains first, and then wipe it with a soft cloth soaked in alcohol.

The humidity in the air is too high, and the moist air particles adhere to the wall and cannot be dried, which is common in the southern region of Huinantian. In order to solve the problem of blistering on the wall, first of all, it is necessary to avoid painting in the season or weather with high humidity, and secondly, the time interval of the number of brushing must wait for the putty or paint film to dry and apply a layer, and clean up the construction environment before painting construction, and clean up the painted object.

Wall moldIt refers to the fungal community that uses the available carbon source and nitrogen source in the wall skin layer (usually refers to the putty layer and the topcoat layer) under the appropriate temperature and humidity to parasitize the surface of the wall in the way of flora, and reproduces in large quantities.

If the range is small, you can re-polish this part and add a layer of putty with better waterproof performance; If the range is larger, it is recommended to re-polish the whole wall and scrape putty. In general, it is recommended to apply another layer of interior wall paint, because interior wall paint is oily and relatively less prone to mold. Moldy on the inner surface of the exterior wall is a common phenomenon in China, and the external insulation of the exterior wall is not done well, and the inner surface is made of mortar as the surface layer, which is in direct contact with the exterior wall and directly conducts the temperature.

After the home is moldy, it must be cleaned up immediately, and under normal circumstances, the moldy place can be wiped off with a wet towel, so it is necessary to open the window frequently for ventilation.

It should be thrown away, because moldy furniture can affect the appearance and is not healthy to use.

Open windows for ventilation, keep indoor air dry, and wipe with a clean towel, or a special towel

Brush away the mold with a dry toothbrush, then gently wipe it with alcohol, and then wipe it with a blended bleaching powder, and then dry it.

If the furniture is moldy, it should be wiped with a cloth strip dipped in some alcohol, and then cleaned with a cloth dipped in some detergent, and the moldy part should be re-smeared with a layer of furniture wax, and then put some deodorized cloth bags to remove the musty smell.

Furniture mold should be wiped with alcohol, and some laundry detergent and dish soap should be added, so that it can be handled well, and the effect is also very good.

I think it should be sprinkled with some baking soda and edible salt and white vinegar and it will be well handled in these places.

Soapy water scrubbing: Clean solid wood furniture regularly, use a soft rag or sponge dipped in mild soapy water to scrub, dry thoroughly and then apply furniture oil wax to enhance the gloss of the surface.

1. Once the furniture is found to be moldy, clean up the moldy place first, and under normal circumstances, wipe it clean with a clean towel. If that doesn't work, try it with a fine-bristled brush. If the area of mold is relatively large, then use a wet towel to vigorously wipe the moldy area to remove the moldy spots, but the bed may be more prone to mold if it is wet, so remember to dry and ventilate after wiping.

2. If there is mold, it is necessary to wipe it with a special mold rag, and it is not finished after wiping it clean, and it is necessary to brush the varnish on the place where the mold occurs, which can effectively prevent mold again.

3. The room is too humid, and bacteria are easy to breed, resulting in frequent mold. Pay attention to open windows frequently for ventilation. Do not use a humidifier inside the house.

After mopping the floor, pay attention to open the window or turn on the fan and air conditioner to dry the house. Also, putting some orange peel on the bed board is also good.

Furniture mold treatment method: 1. Leather sofa mold treatment method: wipe with warm water, and then apply body lotion; 2. Moldy treatment method for fabric sofa:

Remove the moldy fabric and clean it; 3. Moldy treatment method of rattan furniture: clean it regularly with water; 4. Moldy treatment method for solid wood furniture: open windows regularly for ventilation.

If no one lives in the house for a long time, you will see moldy furniture everywhere, what should you do at this time? Let's introduce you to the solution.

01 Leather sofa mold treatment method: first wipe the mildew area with warm water, after maintaining good ventilation (if necessary, you can use cold hair dryer to dry), wait for the moisture on the leather surface to evaporate, and then evenly apply some body lotion to form a protective film.

02 Moldy treatment method of fabric sofa: In addition to leather sofas, some fabric sofas at home are also furniture that is easy to grow hair in rainy weather. The fabric on the surface can be dismantled and washed.

If the fabric sofa is only partially moldy, it can be cleaned locally with a fabric dry cleaner. In addition to normal ventilation, professionals also recommend that you choose a fabric sofa with bamboo charcoal.

03 Rattan furniture mildew treatment method: go to the supermarket to buy mildew and insect repellent, and regularly care for the surface of rattan furniture. For synthetic rattan furniture, it only needs to be rinsed with water regularly, or brushed with ordinary dish soap.

The cleaned rattan furniture should not be exposed to the sun, otherwise it will cause deformation or breakage.

04 Moldy treatment method for solid wood furniture: When the weather is good, remember to open the cabinets and other solid wood furniture from time to time to ventilate. In this way, it can play a good role in mildew prevention and drying. Solid wood furniture in the kitchen should be checked and cleaned regularly to prevent mildew.

05 For the mold of furniture at home, we must deal with it in time, in addition, we should pay attention to air circulation, and often open windows for ventilation can reduce mold.