How to restore factory settings on the computer with one click

If you use the following version of win7810 professional version is a one-click restore, that is, you said factory settings (the factory settings of the system do not exist, BIOS factory settings and system restore are two different things), if the professional version or above is pirated is no, there is no computer can not be turned on, even if there is a restore can not be used, then what to do is to reinstall.

How to restore the system in win7 or 810 (there is a premise, if your computer is frozen, blue screen, and can't be turned on, the restoration method is basically invalid, and then you need to reinstall).

If you have turned on the restore of the system, if you have backed up the image backup, if you have restored the software software, if you have pre-installed the genuine system, if you do not have it at all, you can not restore the system after reinstalling it and making the above preparations, and you can restore it next time something happens.

1) Right-click on the computer to select properties, select system protection on the left, select the disk to be protected in the protection settings, click on the above to restore the system settings and previous versions of the file, press OK in the selected disk usage, and set a few disks to protect a few disks, and set them according to the above method. In this way, the system will automatically back up, or you can manually back up, select Create at the bottom of this page, and create the restore point yourself. The restore method is:

Win7 or 8 restore the system, right-click on the computer to select attributes, select system protection on the right side, system restoration, and follow the steps to do it.

2) Win7 system can also use the backup image function, open the control panel System and Security Backup and Restore Select Create System Image on the left side and do it according to the steps and requirements (the method of restoration is to enter the safe mode and select the repair system to select the image backup and restore it step by step).

Win8 Create Image Method: Open the control panel, select Save a backup copy of your file through file history in System and Security, wait in the lower left corner of the open page, it will display Win7 file recovery, select Create a system image, do it as required (the lower left is not Win7 file recovery, but create a system image).

3) If you use software to back up your system:

4) Pre-installed genuine system restoration method: (win7 home version win810 Chinese version is genuine, professional version and above version of the system 99% is pirated, pirated system is not factory set, said to restore).

It is recommended to consult the brand's customer service and tell you the method, because the brand is different, and the method is different.

What should I do if I want to restore factory settings?

Press the win plus r key combination to open the run, enter sysprep in the settings.

Enter the page, double-click sysprep, exe, pop-up window, check General, and select to enter the new system experience.

Please be sure to back up your data to an external storage device or cloud storage before restoring, please do not just back up files to other disks, when the system restore is carried out, it will take a little time depending on the model and hardware specifications, please do not operate the computer or interrupt the power supply to avoid the restore failure.

The computer can be restored to factory settings using the built-in reset recovery, system restore recovery and more professional U disk recovery, and you can restore the factory settings with one click by finding the corresponding button.

Tools Ingredients: HP 24-DP030, windows10, bring your own software.

1. Use the built-in reset recovery.

Click on the lower left corner of the computer to enter the [Settings] option of the computer. Click on the [Update & Security] option, restore factory settings and some contents, select the restore button on the left, and click the Start option on the right. If you want to recover some of your content, choose to keep some of your personal files.

If you want to restore to factory settings, you need to delete all files.

2. System Restore and Recovery.

Right-click the computer icon on the computer desktop and select the [Properties] option, click [Security and Maintenance] in the lower left corner, and click the [Restore] option in the lower right corner, you can choose to perform a system restore and restore factory settings. Some computers may only take a few tens of minutes to recover, but the average computer recovery takes about 2 hours.

3. Use a dedicated USB flash drive to recover.

This path is complicated and professional, so it is recommended to use the USB flash drive recovery system under the guidance of professionals. The computer can be restored to factory settings using the built-in reset recovery, system restore recovery and more professional U disk recovery, and you can restore the factory settings with one click by finding the corresponding button.

Summary. Hello dear, happy to answer for you! <>

Hello, the method of factory reset varies depending on the brand and model of your computer, but it can usually be done by following these steps:1Back up important files and data.

2.Turn on your computer and enter "Recovery Mode". This may be done by pressing a specific function key (e.g., F11, F12, ESC, etc.), or by pressing the recovery key or key combination (e.g., FN+F11) at power-on.

3.Select "Factory Reset" or similar option in recovery mode. 4.

Follow the prompts to complete the recovery process.

How to restore the factory settings of the computer with one click.

Hello dear, happy to answer for you! <>

Hello, the method of factory reset varies depending on the brand and model of your computer, but you can usually follow these steps:1Back up important files and data.

2.Turn on your computer and enter "Recovery Mode". This may be done by pressing the key for a specific function (e.g., F11, F12, ESC, etc.), or by pressing the recovery key or key combination (e.g., FN+F11) while the power is on.

3.In recovery mode, select "Factory Reset" or similar option: Sail Key. 4.

Follow the prompts to complete the recovery process.

Please note that a factory reset will remove all installed app burises, files, and settings, so you should back up all important data before performing this operation.

After the computer is turned on and enters the system, we press the shortcut key win+i to open the settings interface, and then select Update and Security; 2.In the settings screen that appears, we click on the recovery option of Hail on the left and then select Reset on the right side of this computer to destroy the sails.

Summary. Hello, I'm glad to answer for you, there are usually two ways to restore your computer to factory settings: Method 1:

With recovery partitionsMost brands of computers come with a pre-installed recovery partition at the factory, which can be used to restore the computer to factory settings. Here are the steps:1

Turn off the computer and restart it, press the button that prompts you to enter the recovery partition when the computer is turned on, usually F11 or Enter the recovery partition, and select "Factory Reset" according to the prompts. 3.Wait for the computer to restart automatically and follow the prompts.

Method 2: If there is no recovery partition using an installation disc or USB flash drive, you can restore the factory settings of the computer by installing the CD or USB flash drive. Here are the steps:

1.Insert the installation CD or USB flash drive into your computer. 2.

Turn off the computer and restart it, press the button that prompts you to enter the BIOS settings when the computer is turned on, usually F2 or Enter the BIOS settings, and set the boot device to a CD-ROM drive or USB flash drive. 4.Save the settings and exit the BIOS, and the computer will automatically boot from the disc or USB stick.

5.Follow the prompts on the installation disc or USB flash drive and select "Factory Reset". 6.

Wait for the computer to restart automatically and follow the prompts. It should be noted that before resetting the factory settings of the computer, you need to back up the important data in the computer, because the factory reset will erase all the data on the computer.

Why can't I format this?

Hello, I'm glad to answer for you, there are usually two ways to restore computer factory settings: Method 1: Use the recovery partitionMost brands of computers will have a recovery partition pre-installed at the factory, and you can restore the computer factory settings through this partition.

Here are the steps:1Turn off the computer and restart it, press the button that prompts you to enter the recovery partition when the computer is turned on, usually F11 or Enter the recovery partition, and select "Factory Reset" according to the prompts.

3.Wait for the computer to restart automatically and follow the prompts. Method 2:

If you don't have a recovery partition using an installation disc or USB flash drive, you can restore your computer to factory settings by installing a CD or USB flash drive. Here are the steps:1

Insert the installation CD or USB flash drive into your computer. 2.Turn off the computer and restart it, press the button that prompts you to enter the BIOS settings when the computer is turned on, usually F2 or Enter the BIOS settings, and set the boot device to a CD-ROM drive or USB flash drive.

4.Save the settings and exit the BIOS, and the computer will automatically boot from the disc or USB stick. 5.

Follow the prompts on the installation disc or USB flash drive to perform the tour Zhengyuan operation, and select "Factory Reset". 6.Wait for the computer to restart automatically and follow the prompts.

It should be noted that before restoring the factory settings of the computer, you need to back up the important data in the computer, because the factory reset will erase all the data on the computer.

The built-in F10 factory reset function can help you restore your computer system to its original state in a short period of time.

1. F10 Factory Reset Operation Before Operation:

1.The system factory reset will delete the data in the C drive (including the table town mu files, **, documents, etc.) and the software installed on the C drive, you can check the backup C drive personal documents and other content. After the F10, the software installed on the C disk needs to be reinstalled, and the software installed on the non-system disk (such as the D disk, the E disk, etc.) needs to be reinstalled depends on the characteristics of the software itself.

2.In order to facilitate the subsequent use of Office applications, please remember the Microsoft account and password that you used to activate the Office component of this computer. After the recovery is completed, you need to reconfigure the computer, such as entering fingerprints, pairing Bluetooth, connecting to Wi-Fi, etc., the first boot may be slightly slower than usual, please wait patiently.

3.Before factory reset, unplug other external devices, such as docking stations, USB flash drives, and other storage devices, except for power adapters, keyboards and mice.

4.If your computer is preset with Windows 10, after upgrading to Windows 11, use the F10 system factory reset function to roll back to the factory-provisioned Windows 10 system. If your computer is preset with Windows 11, using the F10 system factory reset function will still return to the factory preset Windows 11 system.

2. F10 factory reset operation method.

Step 1: Enter the System Factory Reset interface.

Method 1: Connect the computer to the power supply, press and hold or tap the F10 key to enter the system factory reset interface.

Method 3 (only for Huawei MateBook E 2019 2022): Connect the computer to the power supply, and when the computer is turned off, press the power button and the volume down button at the same time until you enter the factory reset interface.

Step 2: Factory reset.

After using it for a long time, you will find that the operation is a little stuck, and there will be a lot of junk files, at this time, many users will want to restore the factory settings of the computer with one click, take the win10 system as an example, you can follow the following one-click factory reset steps to operate, other win7, win8, win11 systems are also the same operation, let's take a look!

One-click factory reset of your computer

Tools Raw materials

Device: Lenovo Y7000

System: win10 system.

Methodology tutorials

First of all, open the system settings page, and we click to enter the [Updates and Security] option.

In the left column of the page where you open the standby, find [Recoveryfunction.

After entering the page, we click on the right side to reset this computer under [Get startedbutton.

At this point, we will enter the steps of factory reset, and we will select [Delete everything], and the factory reset will begin.

Finally, just wait for the system to be restored to factory settings, and our computer will be restored to factory settings successfully.

Summary

1. First of all, open the system settings page, and click on the [Update and Security] option.

2. Find the [Recover] function in the left column of the page that opens.

3. After entering the page, we click the [Start] button at the bottom of the reset computer on the right side.

4. At this time, we will enter the steps of factory reset, we select [Delete Everything], and after clicking, the factory reset will begin.

5. Finally, we only need to wait for the system to restore the factory settings to completion, and our computer will be restored to the factory settings successfully.

The above is the solution to bring you a one-click factory reset of the computer, taking the win10 system as an example, other win7, win8, win11 systems are also the same operation, I hope it can help you.