Where can I see the computer configuration, and where can I view the computer configuration

How to look at the computer configuration.

Friends who assemble computers must be very familiar with computer configurations, but some novice friends still can't systematically know how their computer configurations are, so how to look at computer configurations? What are the ways to check the configuration of the computer? Let's share with you how to see the method of computer configuration, although it is a very simple operation, here will introduce 2 methods, I hope it will be helpful to you.

1. Check in the system.

1. First, right-click on the computer - properties and enter the computer properties tab!

2. In the properties tab, you can see the basic CPU and memory configuration, and click to select the device manager on the left for more detailed configuration information.

3. There are detailed information about all the hardware, including drivers.

Wait. Second, the software view.

1. Turn on 360 Security Guard.

Click on Master Lu.

2. When you enter Master Lu, everything is clear at a glance!

Check out how to configure your computer.

For a computer that has just started or a newly configured computer, the first step should be to know the configuration of the computer, how to look at the computer configuration? So here are 3 ways to check the configuration of the computer, hurry up and learn it!

Method 1: Dos command to view the computer configuration.

2. In all programs in the start menu, open the "Accessories" folder.

under "Run".

3. In the pop-up "Run" input box, type: dxdiag.

4. After clicking OK, a pop-up window will appear.

The DirectX diagnostic tool appears, which provides a detailed description of the system, display, sound, and input device configuration and conditions. You can switch between different types according to your personal needs. So how do you look at the computer configuration?

Method 2: Computer device management and management.

1. The computer equipment manager has the information of each device and the information of the system, and there are two different ones here, which are explained separately:

2. Simple computer configuration information:

In the "Computer" section of the desktop, select "Properties" from the right-click menu.

Once you enter, you can see the general information of the system:

3. If you want to see more detailed device-related information, you can click "Device Manager" on the system properties page.

After entering, you can look at the configuration information of a device in detail

Method 3: Use some computer management software to view.

At present, many system tools and software, such as 360 and QQ Butler.

Kingsoft and so on have a collection of computer configuration view function, the following is an example of QQ housekeeper:

1. Open QQ Manager, and you can see "Hardware Detection" on the right side of the home page.

That's it for how to see the computer configuration and what are the ways to check the computer configuration, I hope it will help you! If you want to learn more about how to look at your computer's configuration, you can continue to follow the latest developments in computer problems.

View the product configuration in the system.

Right-click [Start], click [Settings] [System], and click [About] to view the device specifications and Windows specifications.

You can also use the [win] + [pause break] shortcut directly.

Open the About view.

The operation steps and diagrams take win11 as an example, and the operation of win10 is basically the same) <>

Click Product Key & Activation to view the activation status of the current device.

Computers with a pre-installed win10 11 system will be automatically activated when connected to the Internet.

Click Device Manager.

Or right-click the start menu and directly select [Device Manager]), you can view the specific information of the CPU, hard disk, graphics card, camera and other devices.

You can use PC Manager's hardware detection to view display information.

1. First, click on the toolbox to open the hardware detection tool.

2. Check the overall configuration of the computer.

Check your computer's configuration by typing the "dxdiag" command into the runtime.

The specific steps are as follows:

1. Enter "dxdiag" in the runtime.

2. If a DirectX Diagnostic Tool dialog box pops up, prompting us if we want to check, click OK.

3. Check the configuration information of your computer through the pop-up DirectX diagnostic tool interface

a. The red box in the figure below shows the CPU and memory information.

b. The red box in the figure below shows the graphics card and display information.

c. The red box in the figure below is the sound card information.

d. The red box in the figure below is the external input device information (mouse, keyboard).

4. Finally, you can also click "Save All Information" in the lower right corner of the DirectX diagnostic tool interface to save the diagnostic information containing the computer configuration as a txt file.

When you buy a computer, there should be a configuration list, it doesn't matter if you lose it, right-click on my computer, select "Properties", you can see your basic configuration, such as "CPU model", "memory size", etc.;

Or start->run "dxdiag.""command, view system diagnostics, and see more detailed information such as the graphics card.

If you want to see more details, go to the next place online"cpu-z"The software, your motherboard, CPU, chipset, memory modules, including the number of slots, clock frequency, etc. are clear at a glance.

Once in the operating system, you can also use Device Manager and the DirectX diagnostic tool to view the hardware configuration while installing the hardware drivers. Let's take a look at how to use Device Manager to view hardware information. Enter the desktop, right-click the "My Computer" icon, select "Properties" in the menu that appears, open the "System Properties" window, click "Hardware--Device Manager", and display all hardware devices configured on the machine in "Device Manager".

From top to bottom, there are optical drives, disk controller chips, CPUs, disk drives, monitors, keyboards, sounds, and **, and the bottom is the graphics card. To find out which type of hardware you want to know, just click on the "+" in front of it to put it underneath.

In addition to the general hardware information, the device manager can also be used to further understand the working patterns of the motherboard chip, sound card, and hard disk. For example, if you want to view the working mode of the hard disk, you only need to double-click the corresponding IDE channel to pop up the properties window, and you can easily check the device type and transfer mode of the hard disk in the properties window. These are all things that the boot screen can't provide.

Computer, Properties, Advanced, Device Manager.