Is it okay for the apple 5s to be exposed to the sun if it gets into the water?

No, sunlight.

Exposure to the sun will cause burns to the original, damage the electronic components, and the temperature is too high, which will cause irreparable consequences to the fuselage, and should not be exposed to the sun.

Mobile phone water rescue method:

1. Take out your phone and turn it off immediately.

2. Gently shake the charging port downward, and shake off a little water droplets from the charging port as much as possible to prevent the water droplets from flowing into the depths of the phone and injuring key parts.

3. Dry your phone, and use a cotton swab to dry the charging hole and headphone hole if possible.

4. Ventilation and standing! Don't use a hair dryer or wrap it in a paper towel, as this will exacerbate the mold.

5. Go to the professional maintenance point for disassembly, cleaning, inspection and repair as soon as possible.

After the phone is flooded, the most wrong way for the owner to deal with it is:

1. Turn on or call ** to try how the phone is. (Water conducts electricity, and any operation may cause an internal short circuit to break down the element).

2. Blow with a hair dryer and radiators.

Roast and let it dry. (The water is dry, but the impurities are still there, even if it is clear water.) These impurities lodge in the vias of components and boards and can corrode the motherboard, and the longer they go, the more severe the corrosion becomes).

What mobile phone can not be exposed to the sun is not good for the battery and body Take a hair dryer to blow from the power socket and headphone hole, but there is no guarantee that your mobile phone can still be like the original But the water in it must be gone, it is recommended to go to the store as soon as possible to repair it.

1. The mobile phone can still be displayed normally after water ingress, and if it is in the power on state, it should be turned off immediately to avoid short circuit and burning the hardware due to water ingress inside the hand.

2. If the hands-on ability is relatively strong, it will disassemble the machine for treatment by itself In the case of water ingress is not serious, after dismantling, use the air to dry the residual liquid inside the machine, and then leave it empty for a period of time.

3. Don't disassemble the machine easily. In addition, after the Apple 5S has been flooded, I have found a general mobile phone repair shop outside for simple treatment. After it was not handled well, it was then taken to an Apple authorized service provider for processing.

Because the warranty of Apple's mobile phone will involve some barcode identification of internal parts, if it is not a professional Apple after-sales service, this information may be destroyed, resulting in the inability to take the normal warranty path.

4. If the iPhone unfortunately gets into the water, you can directly take it to the local Apple authorized service provider for testing and paid replacement service. Although it is a paid replacement service, you can continue to enjoy the normal warranty.

iPhone5s water ingress please deal with it as follows:

First, don't try to turn on or charge the computer if there is water, because the Apple iPhone has a built-in battery that cannot be removed, and the motherboard will be short-circuited if the water is in, and the motherboard may be burned when turned on or charged;

Second, because water is conductive, and even if it is tap water, it will be acidic and alkaline, which is corrosive, so it needs to be taken to the maintenance center immediately after water ingress to be disassembled and cleaned up, so as to avoid water residue on the motherboard and mold, corroding other parts;

Third, if the water is at night and cannot be repaired, you can put the mobile phone in the rice tank or under the lamp, absorb the water and bake it a little, and please send it for repair immediately the next day, the first is because this can only absorb the external water, but the internal water cannot be sucked dry, and the second refers to the second point;

Fourth, non-professionals please do not disassemble the machine by yourself, there are many disassembly tutorials on the Internet, but the Apple mobile phone is very precise, and non-professionals disassemble the machine by themselves, which will cause more serious damage to the machine.

It is useless to shut down the iPhone when there is water in, because the iPhone has a built-in battery, and if the battery is not removed, the battery will continue to power the motherboard; Therefore, it is necessary to send it to a professional maintenance point for cleaning and drying immediately after water ingress, the first is to prevent the motherboard from burning out, and the second is to prevent the motherboard from growing mold.

The wifi gray is very likely to be the wifi burned out, and it is recommended to send it for repair as soon as possible to avoid more and more follow-up problems.

Turn it off and then don't do anything and don't throw it off after sale.

If there is no after-sales area, take it to the Apple repair point, disassemble the machine, blow dry it with a heat gun, and then test it, and the motherboard will be fine if it does not burn.

It depends on how much water enters, if you take it out immediately after entering the water, because the Apple machine is better sealed, so the problem is not big, and there is no big impact; If there is too much water ingress, or if it is dirty water going in, it will have a big impact, and even if it is blown dry, there may be corrosive things on the motherboard inside.

Yes. Although you blow dry . However, water is a chronic poison for electronics and can corrode motherboards. Just because you can use it now doesn't mean it's good in the future.

Problems will slowly unfold over time. Finally, take it to the repair point for cleaning.

It's hard to say, let's watch it while you use it. If there is a problem, then solve it...

More or less a little.

The first water ingress must be turned off first to prevent the motherboard from being burned out; The second is to wipe the mobile phone dry from beginning to end, use a cotton swab to get the gap in to absorb it, and the third is to put a paper towel or bag in the rice jar and seal it for 2 days to let the water absorb dry.

Because the water enters the circuit of the motherboard, if you don't disassemble the machine and do an internal cleaning with plate washing water and ultra-green wave, it will slowly oxidize and rust, and wait until a certain time, so many lines only need a short circuit, the entire motherboard will be wasted, and it is irreparable. Because by that time, all the lines would be almost rusty.

Therefore, we must take the water inlet machine to disassemble and clean it as soon as possible, and the other thing is that the water inlet machine apple is not guaranteed, which is artificial. And there are some labels in the Apple phone, as long as the water enters, those labels will turn red. Apple will not have a warranty after sale.

Mobile phones are afraid of water, many mobile phones are really not worth repairing after entering the water, it is very expensive to repair, or it is not good to repair, it is better to directly change to a new one, and now the new mobile phone is relatively cheap! Many of them will still have some hidden dangers even after they are barely repaired! I hope it can help you, and I hope to adopt it in time!

Thank you! o(∩_o~

It depends on how much water enters, if you take it out immediately after entering the water, because the Apple machine is better sealed, so the problem is not big, and there is no big impact; If there is too much water ingress, or if it is dirty water going in, it will have a big impact, and even if it is blown dry, there may be corrosive things on the motherboard inside.

Yes. Although you blow dry .

However, water is a chronic poison for electronics and can corrode motherboards. Just because you can use it now doesn't mean it's good in the future.

Problems will slowly unfold over time. Finally, take it to the repair point for cleaning.

Hello, this depends on the severity of the water ingress of the equipment and the remedial measures taken.

Generally, it is not recommended to continue to turn on the machine after entering the water, as well as to operate blindly, it is recommended to take it to the maintenance point by professionals to disassemble the machine to remove the water protection, if the components are damaged, you can also judge and repair.

If you turn on the machine after entering the water and find that there is no problem to continue to use the stool, it is also possible, and it should be judged according to the actual specific situation.