How to wire the switch with socket? Switch with socket wiring points

There are many places where sockets will be installed, and now is the era of electrification, so sockets are more common, because every electrical appliance is installed with sockets, but there are also different types of sockets, so we should pay attention to it when installing, so how to wire the switch with sockets? What are the key points of switch with socket wiring? Next, let's introduce it to you by the decoration home network.

1. How to wire the switch with a socket.

1.The live wire, neutral wire, and ground wire need to be properly connected to the socket's interface. According to the figure, the live wire is connected to one of the two holes of the switch in the A mark, and the other hole is left with the insulated wire to connect the L hole in the three holes of the socket below to pass through the docking.

The N hole in the 3 holes of the neutral line access socket is firmly connected. The E hole in the 3 holes of the ground cable access socket is firmly connected. If the neutral wire and the ground wire are misconnected, there will be a black light and a switch trip when using the electrical appliance.

2.If the socket is not controlled by a switch, and the switch will only control the lamp, then the wiring method is: connect the live wire to the L terminal of the switch, connect the L1 terminal of the switch with a terminal block of the lamp head, connect the zero wire to another terminal of the lamp head, and form a loop between the switch and the lamp.

Then connect the live wire to the L terminal of the two-pin socket, and connect the neutral wire to the N terminal of the receptacle, and the two-prong socket becomes another circuit.

Second, the switch with socket wiring points.

1.You can set up some sockets with switches, so that you don't need to pull out the plug and cut off the power supply, and the unplugged wires will not affect the appearance, such as the washing machine socket can be closed when not in use, the air conditioning socket can be closed in the off-season without unplugging, and the kitchen socket should not be installed on the stove to prevent overheating; Install the bathroom bath bomb switch, remember to leave a few more centimeters, because this switch is generally larger than the light switch, if you can't install it a little bit, it will be troublesome;

2.When considering sockets for spaces such as living rooms and bedrooms, make sure that each main wall has a 5-pin socket to meet the needs of daily life. The location of the socket should be determined according to the design of the house, such as the socket at the location of the TV background wall can be appropriate, and the other locations are as needed.

3.Do not install the kitchen socket on the stove to prevent overheating; Install the bathroom bath bomb switch, remember to leave a few more centimeters, because this switch is generally larger than the light switch, if you can't install it a little bit, it will be troublesome; If the switch is installed too close to the water, if it is installed on an open balcony, remember to use a special splash-proof cover for the switch socket; Consider the sockets and corresponding control switches for lights in bookcases and cabinets; Consider sockets and corresponding control switches for burglar alarms, gas alarms, wall-mounted LCDs, entryway lights, etc.

Sockets are more common in our lives, but there are different types of sockets, so what are the key points of how to wire the switch with the socket and it is wired, I think we have read the above introduction and we also understand these, so if you still want to know more decoration information, please continue to pay attention to the decoration home Internet café.

How to connect the socket.

1. Use a test pen to find out the live wire;

2. Turn off the power of the socket;

3. Connect the live wire to one of the two holes of the switch A mark, and then connect an insulated wire from the other hole to the L hole in the three holes of the socket below;

4. Find out that the N hole in the three holes of the zero line direct access socket is firmly connected;

5. Find out that the ground wire is directly connected to the socket in the three holes of the E hole.

Attention to socket installation.

1. The installation height of the socket should be installed according to the requirements when there are clear requirements; When the design is not clear, it should generally be complied with: the socket with a safety door is not less than; The socket without a safety door is not low. It is advisable to buy an outlet with a safety gate whenever possible, as there is not much difference between the two**.

2. In the toilet or other humid places, a well-sealed waterproof and splash-proof socket should be used. Three-hole socket, when the plug is inserted, the grounding pile head (slightly longer) is inserted into the hole first, and the mechanism in the socket opens the other two hole doors, and the two-hole socket must be inserted into the socket pile head at the same time, and the safety door can be opened, so as to prevent young children from inserting metal objects by mistake and causing safety accidents.

3. When the socket is installed, its panel should be upright and close to the wall. And the wiring (phase) should conform to: single-phase two-hole socket, facing the right hole or upper hole of the socket to connect the phase wire (live wire), the left hole or lower hole to connect the zero wire; Single-phase three-pin socket, the right hole facing the socket needs to be connected to the phase wire (L, live wire), the left hole needs to be connected to the neutral wire (N), and the upper hole needs to be connected to the ground wire (PE).

There are two ways to wiring the socket with switch:

1. Switch control socket.

Firewire connector L1, switch L and socket L are connected with **, the neutral wire is connected to socket N, and the ground wire is connected to socket E (grounding symbol).

2. Switch and control the lights.

The socket is always on. The live wire is connected to the socket L, the switch L and the socket L are connected with **, the neutral wire is connected to the socket N, and the ground wire is connected to the socket E (grounding symbol). Switch L1 connects the control line to the positive pole of the lamp, and socket N connects the neutral wire to the negative pole of the lamp.

How to wire the socket with a switch For household socket installation steps and precautions, please see the wiring diagram of the socket with a switch:

Above is a switch-controlled bulb; The picture below is a switch control socket:

Household socket installation steps and precautions:

1: First figure out which is the live wire, neutral wire, ground wire, and control line;

2: Wiring after the power is off.

3: The position of the line of fire is on the right, as shown in the figure below

Whether it is a switch or a socket, it is needed in our life, it is connected by our electrical appliances, in order to ensure the normal use of our electrical appliances, so switches and sockets are very important to us, and now some people in order to save things, they have produced a switch with socket this product. Although it is similar to our ordinary switch socket, we still need to understand its wiring method when installing, so as not to have different situations, and then we will understand how the switch with socket should be wired.

How to wire the switch with socket?

1. First of all, introduce the simplest single-control single-open switch (that is, a rocker switch, control a branch) wiring method: single-open wiring is the simplest, the line has been worn in the general building construction process, and the red line is generally connected to the L binding post on the back of the socket, and the blue wire is connected to the L1 binding post is OK.

2. Single-open five-hole wiring: red wire (live wire) and blue wire (neutral wire) are connected to the socket binding post L and N respectively, and the yellow and green two-color wire is connected to the socket terminal post E (protection wire), and then use a ** short circuit socket L binding post and switch binding post L, and the other wire from the bulb is connected to the switch binding post L1.

3. Single-open three-hole wiring: the same as the step 2 connection, but the single-open five-hole is compared with the single-open three-hole comparison, the difference is that the two (l) live wire binding posts and (n) zero wire binding posts of the socket have been shorted inside, and we do not need to short-circuit them personally, but it is worth noting that some buildings with low requirements do not wear protective wires (yellow and green) when wiring, so that the socket terminal post e does not need to be wired.

4. Switch control multi-purpose socket wiring diagram: multi-purpose socket, you can insert a triangle seat, and you can insert a double-pin socket, and the feature of the switch control multi-purpose socket is that the socket is controlled by the switch. The socket is powered when the switch is closed, and the socket is powered off when it is disconnected.

5. Bath bomb switch wiring: Some bath bomb switches are not connected to the bath bomb when they leave the factory, but we have to connect them ourselves, the connection method is as follows: all the binding posts at the upper end of the switch are shorted with **, and a wire is drawn from any of the most edge binding posts to connect the home line live wire (generally the red line), and the lower end of the switch leads out a wire to the home line zero line (generally the blue line), remember that the lower end can not be terminated, otherwise it will be short-circuited.

6. Kitchen socket wiring: first string the L, N, and ground wires in the socket, and then connect the L, N, and ground wires of the most marginal group of binding posts with the L, N, and ground wires at home.

It is not difficult to understand the way of wiring, that is, there may be some trouble in the operation after understanding, but we must take our time according to our nature, because electricity is very dangerous, if there is a problem with any detail, it may pose a threat to us. In addition, remind everyone to turn off the main switch when wiring, can not let the home be electrified, now the switch with socket has not only been used in the home, some industries have also begun to use. As its range of applications increases, we should really know how it is wired.

You can get it for free

1. If there are three holes in the socket with a switch, then it has a total of five binding posts: neutral wire N, ground wire E, jumper L1, live wire L and jumper L2.

2. Connect N to the zero line first, E to the ground wire, and then connect the jumper L1 with the jumper L2, and leave L directly on the live wire. If the jumper wires of the switch are already connected internally, there is no need for additional wiring.

The live wire is connected to the binding post with L, and the wire is to be introduced into the other hole to connect to the socket below. The corresponding connection is connected to the L2 hole, the neutral wire is connected to the N hole of the socket, and the ground wire is connected to the E hole of the socket. Note that the neutral wire and the ground wire must not be connected incorrectly, otherwise the switch is prone to tripping.