What items do I need to check before the delivery of the car paint coating?

Hello, automotive coating needs to pay attention to the following points:

First, the paint front treatment.

The car body should be thoroughly cleaned before coating. Clean the body thoroughly, and use air blowing and dry cloth to wipe off the moisture remaining in each gap to avoid small water droplets and small particles of dust affecting the coating effect during construction.

Oxide layers, iron powders, oil stains, etc. are removed, and the complete paint surface is presented. In fact, not only coating, but also other care products need to be treated before painting.

Second, the selection of automotive coating products.

Positioned for your car is a professional-grade coating. Generally, it is a new car coating, and it is best to go to a car beauty shop to do a professional-grade coating; Old cars can consider DIY coating by themselves.

3. Coating details.

When coating the car, it should be carried out separately, and the whole vehicle should not be constructed at the same time, and a part of the car paint coating should be evenly wiped before the next part. Because the coating layer is easy to cure quickly during application, it needs to be completed in a short time.

4. Precautions.

Pay attention to the polishing process, because improper polishing is easy to cause irreversible paint damage, which is why so many riders are reluctant to polish easily.

It is best not to wash the vehicle within 7 days after the car coating to achieve the best bright effect of the coating. In the future, a neutral car wash liquid should be used in the car washing process, and alkaline liquid should not be used. Alkaline car wash liquid foam, which has a dissolving effect on the coating layer.

After the paint coating is completed, it is necessary to check whether the paint surface is uniform, whether the paint surface is clean and whether there is any residue, whether the decorative board has a coating solution, and check whether there are any tools left in the future.

Protect the paint, prolong the life of the car, and take good care of it. Common car beauty care techniques include waxing, polishing, glazing, coating, etc. And coating is a maintenance skill that most car owners are keen on. Let's take a look at why car paint should be painted on the car repair side of this site.

What is Optical Coating? What is Coating?

Teflon, the main ingredient in automotive coatings, is one of the smoothest substances mastered by humans. This extremely smooth material magically keeps your car clean and tidy, so that even water doesn't get on the paint film. As a result, any dirt that adheres to the car's paint surface can be easily washed away with water.

The core technology of automotive paint protection film is to use non-petroleum environmental protection materials such as glass cellulose, silicon polymer, snow pigment polymer, and high-purity water to form a layer of non-oxidizing protective layer on the automotive paint, which completely isolates the automotive paint surface from the outside world, and has extremely high strength and weather resistance.

What is Optical Coating? Why paint a car?

No matter what kind of car it is, if it can have dazzling colors and shine, it is enviable, so all you have to do is coat your car and take good care of it. Therefore, improving and protecting the gloss and color of automotive paint has become the main purpose of automotive paint beauty. However, 100% of automotive paints will have the following during use:

1: Ultraviolet radiation oxidizes the paint surface, darkens the color, and the luster disappears.

2: Acid rain, insect carcasses, bird droppings, adhesives, chemical corrosion make paint stains and shine disappear.

3.A small hairline can weaken the mirror effect of the lacquer. Applying a protective film with high gloss, strong wear resistance and strong corrosion resistance to the paint will undoubtedly effectively avoid the occurrence of appeals. Therefore, high-quality automotive coatings can effectively improve and protect the color of automotive paints.

4.In windy and dusty weather, the sand particles will leave countless small scratches on the car body, which will cause the paint surface to turn black over time.

What is optical coating and how often is it plating?

Because the driving and parking environment of the car is different, it is necessary to consider whether or not to paint it according to the actual vehicle condition and the urban environment. Rainwater in the south contains a lot of acidic substances, and there is more rain, so it can be applied relatively more often, while in the north, it does not need to be waxed frequently. The car that is often parked in the garage can be painted once every 8 months or so.

Cars that are often parked in open parking lots can be painted once every 5 months. For vehicles parked in the open air, it is recommended to apply the film every 3 months because of the wind and rain.

Improve the hardness and smoothness of the paint surface, the paint surface is completely isolated from the air, and will never fall off from the influence of external factors. I hope my friends can enjoy all the content shared by "Repair Bian Xiao" about why car paint should be painted.

1. Surface cleaning and degreasing.

A weakly alkaline car wash liquid is used to degrease the car.

Degreasing is carried out using a special degreaser composed of xylene.

Amika products cannot achieve high-density formation if the degreasing surface is not completely degreased. In addition, since amika reacts with water to produce SiO2, it is necessary to completely remove the water from the body before rubbing. In other words, to completely degreas, completely dry conditions are very important in Amika's professional construction.

2. Painting method.

There are two main coating methods of Amika, spray coating and manual application, and the coating method selected is directly related to the film thickness.

When applying manually: Apply with a coating cloth covered with amika without leaving any gaps, and gently wipe with a clean towel before the solvent dries completely, and finally finish neatly and cleanly. The construction of Amika needs to be carried out three times, and after all the construction is completed, wait for about 5 30 minutes to apply the hydrophilic accelerator and water repellent accelerator.

Finally, the drying construction is completed.

Note: The used coating cloth must be cleaned before being re-applied, otherwise it may react with Amika and cause accidents, so please never use it.

3. SiO2 crystal conversion time of the coating.

SiO2 crystal conversion can be completed under three conditions: heating, humidification or room temperature storage, and the film effect obtained by heat treatment is generally the best. Usually the coating used in car paint takes about 2 to 6 weeks to complete the crystal transformation at room temperature.

We are a professional car paint coating company, with high-end technology and professional Japanese coating products and professional technicians, to provide customers with intimate service and after-sales service.

1. Degreasing and cleaning before electrojet coating 2. Grinding and polishing before electrojet coating 3. Coating spraying 4. Baking with infrared baking lamp 5. Wipe and clean after coating 6. Seal treatment 7. Beauty of exterior parts 8. High temperature resistance test.

It's like spray paint!

Waxing, sealing glaze and coating are three forms of paint beauty, the principle of action of these three forms is the same, are used to act on the surface of the car paint, so that the paint is isolated from ultraviolet rays and air, to achieve the purpose of protecting the paint surface, but because of the difference in the products and construction technology used, the effect is very different, the simple understanding of waxing belongs to the maintenance category, the glaze sealing is to belong to the protection category, the coating belongs to the maintenance category, and the protection time of the coating is much higher than the waxing and sealing glaze, it is this reason, Paint coating is popular, mainly highlighting two aspects, the first is to increase the oxidation resistance of the paint surface, the second is to increase the hardness of the paint surface, and the gloss and smoothness of the paint surface also have a relatively large improvement.

3M's crystal coating is a banner of coating products, the biggest advantage is that it can reach the level of zero oxidation, the paint surface will not oxidize during the action period, the waxing due to the lack of technical content ** difference is not large, the coating process is more complex, of which the polishing link is the most important, polishing is a technical job, improper treatment will expose the paint surface, causing irreparable damage to the car paint, the scratches of the paint surface can not be treated with the technology is not in place, and the mirror effect can not be thrown, which greatly affects the final effect of the coating. In addition, there is a huge difference between the responsible store and the irresponsible store in the process design and construction details, some shops do 3m crystal coating process is simple, polishing goes through the motions, and the effect is not much different except for the waxing time, some store workers have a high level of technology, rigorous process design, meticulous construction, 3m crystal coating is made to be a new look, Ambilight, and it is worth the money. If you suggest to do 3M crystal coating in Beijing to go to the sea bridge on the east side of the Century Jinyuan Hotel on Banjing Road, their 3M crystal coating process has won the Innovation Award, the workers have a high level of technology, and there is a general inspection to do the acceptance, and the money is spent.

There are several kinds of coatings, some are anti-oxidation and corrosion of car paint, and some are to strengthen the hardness, and the effect achieved is not the same. It is recommended to do crystal coating, which is equivalent to a transparent layer of umbrella on the car paint.

Maintenance of the paint is only. My understanding is that it is a high-level waxing 、、、

It can make a slight scratch without damaging the car paint.

But to be honest, it's really not very useful.

This is the coating construction process of Amika of the Pretty Car Club.

1. Wash all the paint surfaces of the body.

2. Then use car wash mud to treat the stubborn dirt on the surface of the car paint.

3. Use special tape to glue the plastic parts and the edge of the headlights to prevent accidents 4, and polish the whole car "the new car is free".

5. Carry out the construction of the mirror surface of the whole car.

6. Tear off the tape and use a high-pressure water gun to rinse the whole car and side seams.

7. Degreasing the paint after dehydrating the whole car.

8, and then start to apply the film liquid, wipe the film liquid with a soft towel until the paint is shiny 9, and carry out the film layer water repellent operation.

10. Check the whole car to confirm that there is no mistake in handing over the car.

1: Do not get wet within 2 hours Do not wash the car for 7 days.

2: If it rains within 7 days, rinse it with water after the rain is clear.

3: Miscellaneous.

The benefits of coating are as follows:

1. The polishing process in the coating can remove the fine scratches and oxide layers of the paint surface, which greatly improves the mirror effect of the paint surface;

2. The coating can protect the paint surface, such as increasing the oxidation resistance of the paint surface and the hardness of the paint surface;

3. Increase the finish and smoothness of the paint surface;

4. Let the owner feel good and have more face.