How to use a DJ mixer?

In fact, there is nothing to know, but there is a description.

First of all, for the system that has been connected, be sure to check the signal type on each input channel (turn the input switch to the corresponding position) before use, and it is best to use the monitor button (cue) on the table with the gain control (CAIN) knob, and then check the signal level, and use CAIN to adjust the signal level to the best state.

Secondly, it should cooperate with other equipment of the system to limit the highest position of the input and output channel faders of the DJ station on the premise of ensuring that the loudness of the sound reinforcement on the site meets the requirements.

This step may seem unimportant, and it seems to be rigid, but in practice, most DJ players can inadvertently use the level output and gain of the DJ station "violently", if you do not set a range in the main system and other equipment, I am afraid that the equipment is in danger of damage.

Summary. Hello, dear, I'll help you solve this problem. The steps are as follows:

Under normal circumstances, the DJ plug-in mixer can be powered by XLR or RCA interface, and the XLR interface is a pinhole interface, and there are generally three, namely the left channel, the right channel and the ground wire; The RCA interface is a round hole interface that can accept audio signals and has both left and right channels. Insert the audio output cable (XLR or RCA interface) of the DJ station into the input cable (XLR or RCA interface) of the mixer, connect the power supply of the mixer, and then insert the output cable of the mixer into the input cable of the speaker or mixer to complete the operation of inserting the DJ station into the mixer.

Hello, dear, I'll help you solve this problem. The operation steps are as follows: under normal circumstances, the DJ plug-in mixer can be powered by XLR or RCA interface, and the XLR interface is a pinhole interface, and there are generally three, namely the left channel, the right channel and the ground wire; The RCA interface is a round hole interface that can accept audio signals and has both left and right channels.

Insert the audio output cable (XLR or RCA interface) of the DJ station into the input cable (XLR or RCA interface) of the mixer, connect the power supply of the mixer, and then insert the output cable of the mixer into the input cable of the speaker or mixer to complete the operation of inserting the DJ station into the mixer.

You follow this step, and if you have any questions, you can give me feedback in time!

1.Sound quality compensation.

Sound quality compensation is to use the sound quality compensator to adjust the center frequency of each frequency band, so as to change the timbre of the sound.

2.Volume adjustment.

Before tuning, it is necessary to understand the dynamic level and frequency characteristics of the acoustic signal and the proportional relationship between the live signals. It is necessary to audition and debug many times, and at the same time, it is necessary to take into account the various situations and effects of the future **.

3 signal inputs.

From top to bottom is the tweeter XLR socket, the receiver input, which usually provides conversion power.

4. Plug into the socket.

The insertion point is usually located in the input channel of the mixer, which is in front of the signal path, and sometimes directly in the input channel. This dynamic processor insertion point is typically used.

5 sound control panel.

There is a four-segment control board, where we can adjust the high, medium, and low signal frequencies for each channel.

6 Signal Tuning Meter.

Use the aux send port to send the signal to an external processor for effects processing, and then send the processed signal to the tuning table through the aux return port. When assigning outputs, the bus can be occupied by the main output, sub transmission, and return, and with only four signal outputs, the more lines can be assigned, which is important for multichannel recordings.

When raising the bass, do not jerk the compensation button to avoid excessive power output damaging the amplifier and speakers. Low-frequency adjustment of the equalizer is also required.

The mixer, also known as the tuning console, will amplify, mix, distribute, modify the sound quality and process the sound effects of multiple input signals, and is an important equipment for broadcasting and recording programs in modern radio broadcasting, stage amplification, audio program production and other systems. Mixers can be divided into analog mixers and digital mixers according to the way the signal comes out.

There are differences in the number of input channels, the number of function keys and the output indication of the mixer, in fact, to master the use of the mixer, it is necessary to examine it in general, through actual operation and connection, practice makes perfect. The mixer is divided into three parts: the input part, the bus part, and the output part.

The busbar connects the input and output parts to form the entire mixer.

Material tools.

Mixer. Method.

First of all, let's get to know the mixer, which is a mixer with 16 mono inputs and 4 stereo channels (the default audio amplifier has been connected to the audio cable, and the mixer is in the power-on state).

Please click Enter a description.

l r is the signal output port of the mixer, and Mono is the subwoofer output port.

The picture below shows the entrance and exit of the computer sound source, white and red as a group, 21 22, 23 24. The audio cable from the computer headset can be connected to both sets. For example, connect the audio cable to 21 22.

Please click Enter a description.

Please click Enter a description.

The red fader is the general control of the volume (abbreviated as ST in English), and it is generally pushed to the 0 scale, and the mono fader should be understood by everyone at a glance is the output control of the subwoofer.

Please click Enter a description.

When you push the total volume (ST fader) to 0 scale, for example, connect the audio cable output from the computer to 21 22, and then push the faders 21 22, so that the speaker will output the desired sound source.

Please click Enter a description.

The mixer also has a number of mono channels that can also be connected to sources.

Please click Enter a description.

In general, two audio sources are enough for the unit, and most of the channels are microphone channels, so connect the microphone to the channel at the back and push the corresponding faders.

Please click Enter a description.

The mixer, also known as the tuning console, will amplify, mix, distribute, modify the sound quality and process the sound effects of multiple input signals, and is an important equipment for broadcasting and recording programs in modern radio broadcasting, stage amplification, audio program production and other systems. Mixers can be divided into analog mixers and digital mixers according to the way the signal comes out.

There are differences in the number of input channels, the number of function keys and the output indication of the mixer, in fact, to master the use of the mixer, it is necessary to examine it in general, through actual operation and connection, practice makes perfect. The mixer is divided into three parts: the input part, the bus part, and the output part.

The busbar connects the input and output parts to form the entire mixer.