How to pay attention to the run in period of the new X Trail 2 0 comfort version

Hello! The run-in period is not much worth noting, because the machine has gone through the cold run-in process before leaving the factory, as long as you pay attention to 1, the run-in period is generally divided into three stages, the first stage is generally considered to be 0-1000 kilometers, that is, this stage to keep the speed can not be too high, generally not more than 80 yards is appropriate, the speed can be carried out in this period of preliminary running-in, basically 0-4000 rpm should be properly run-in, the throttle should not be too heavy. 2, the second stage of 1000-3000 kilometers, this period, the speed can still not exceed 80 yards, the speed continues to run-in, the throttle can be appropriately added some kilometers - 5000 kilometers, during this period can be the first insurance, the first insurance after the high-speed, that is, between 80-120 or 130 yards, each speed of the car can be used at a constant speed for more than ten minutes, at this time the throttle can be used as much as possible, there is no clear requirement for the speed, personal recommendations do not exceed 4500 revolutions.

4. The time of the first insurance can be carried out within 5000 kilometers after 3000 kilometers. 5. Pull the high-speed, 1 time 2 times is enough, there is no need to go to Dora, I personally recommend to do the first insurance, and then pull the high-speed, of course, there are also 4S recommendations to pull the high-speed first, and then do the first insurance, in fact, they are all the same. Have a nice ride!

If my reply can help you, please help choose it, thank you very much!

Hello, don't rush the throttle and don't brake sharply, don't exceed 100 yards, try not to carry weight, the best speed is 60 to 80 yards, and go to the first insurance at 3000 km.

If you have any questions, please log in to Baichebao to find me.

Hello friends. During the run-in period, pay attention to the driving speed should not exceed 100 yards, and the engine speed should not exceed 3000 rpm, and drive gently.

Within 2000 km, try not to exceed 3000 rpm, and the speed is limited to 90 km/h; Slow refueling, avoid rapid acceleration, fuel saving and car saving, open the economic mode if the novice throttle control is not good, drive with foresight, and try to avoid sudden braking; It is necessary to run a high speed after 2000 km, and it is appropriate to increase the speed manually because the speed of D gear will not exceed 2000 rpm at 120 km. Thank you.

Generally, the number of car run-in kilometers is said to be less than 3000, and the basic driving to 2000 to 2500 kilometers is almost past the run-in period (if you cherish your car). Also, be careful not to exceed 3000 rpm! During the run-in period, do not accelerate sharply, brake in advance, and do not brake sharply (all personal opinions).

Does Xinqijun have a run-in period, and Qijun has a run-in period. During the run-in period, the speed of the vehicle should not be fixed for a long time. You need to slowly accelerate the change of deceleration in order to slowly run in each gear.

You can also switch to manual mode to operate in gear and speed ranges. Avoiding long periods of idling during the run-in of a new car will increase carbon deposits in the car's engine. The Nissan Qijun is a domestically produced urban SUV priced at around 200,000 yuan.

Qijun has the advantages of empty rooms, high chassis passability, and low fuel consumption. Qijun's sales have been good, and won the global SUV sales championship. Because the run-in of a new car is still very important, a good run-in can make the performance of the car better and the fuel consumption lower, so some cars can be driven for 10 years, and some cars need to be overhauled for 5 years, which is different from the run-in of a new car.

The initial run-in stage of Qijun's power system was when Nissan's new Qijun car ran 500 kilometers. The driving speed is generally recommended to be below 40-60 kilometers, and the engine speed of Qijun should not exceed 2500 rpm, so as not to overload the CVT gearbox and pull heavy objects. The mileage of Nissan Qijun SUV reaches 500-1000 kilometers, which is the mid-term run-in period of Qijun automobile power.

At this time, the speed can be increased appropriately, generally reaching 60-100 kilometers, and the speed should be kept below 2500rpm as much as possible. This step-by-step acceleration can better promote the running-in of accessories, detect small problems in time, and avoid sudden acceleration during operation and long-term idle shutdown. To change and disassemble Qijun, you need to go to the 4S shop for maintenance of 1000 kilometers, free of charge.

It mainly depends on the power system and chassis suspension system of the car, as well as whether there is any problem with the oil circuit system. This maintenance does not require an oil change. Millions of car purchase subsidies.

Qi Jun has a run-in period. During the run-in period, the driving speed should not be fixed for a long time. You need to slowly accelerate the change of deceleration in order to slowly run in each gear.

You can also switch to manual mode to operate in gear and speed ranges. During the run-in period of the new car, avoiding long-term idling will increase the carbon accumulation of the car engine.

Nissan Qijun is a domestic urban SUV, ** around 200,000 yuan. Qijun has the advantages of free space, high chassis passability, and low fuel consumption. Qijun's sales have been good, and he has won the global SUV sales championship.

Because the run-in of the new car is still very important, a good grinding Chang Burn dress up can make the performance of the car better, lower fuel consumption, so some cars can be driven for 10 years, and some cars need to be overhauled for 5 years, which is different from the run-in of new cars. The initial run-in period of Qijun's power system was when Nissan's new Qijun car ran 500 kilometers. The driving speed is generally recommended to be below 40-60 kilometers, and the engine speed of Qijun should not exceed 2500 rpm, so as not to overload the CVT variable section starter and pull heavy objects.

The mileage of Nissan Qijun SUV reaches 500-1000 kilometers, which is the mid-term run-in period of Qijun automobile power. At this time, the speed can be increased appropriately, generally reaching 60-100 kilometers, and the speed should be kept below 2500 rpm as much as possible. This gradual acceleration can better promote the running-in of accessories, find small problems in time, and avoid sudden acceleration during operation and long-term idle shutdown.

Qijun 1000 kilometers need to go to the 4S shop for maintenance, which is free. It mainly depends on whether there are problems with the car's power system and chassis suspension system, as well as the oil system. This maintenance does not require an oil change.

Millions of car purchase subsidies.

The run-in period of the new Qijun is generally about 500 kilometers, which is the initial run-in period. During the initial break-in period, the recommended driving speed is around forty to sixty kilometers.

Moreover, the engine speed of the new X-Trail should not exceed 2500 rpm, and it is necessary to avoid pulling heavy objects and overloading the CVT gearbox during this initial break-in.

During the initial running-in, it is also necessary to pay attention not to emergency braking, during driving, it is best to hang a relatively gentle road to avoid the occurrence of emergency braking, which can reduce the load on the power system and the body.

And during this period, it is best to choose high-quality fuel, and you must choose fuel that meets national standards, otherwise there is a risk that non-standard fuel will block pipelines and fuel tanks.

There are also cold cars that are warmed up before starting, so that the engine group photo slowly rises to the normal operating temperature, which can avoid damage to the engine.

Finally, during the initial run-in, it is necessary to pay attention to the appropriate gear.

In particular, manual spine Qiaoji key gear cars have certain requirements for gears.

If the revs do not match the gear, the car will make a deep sound, and sometimes it will even stall.

Millions of car purchase subsidies.

The first 500 kilometers is the initial run-in period for Qijun, and it is also the run-in period for the tires. The run-in quality of the vehicle directly affects the later use experience. It is recommended that the driving speed should not exceed 60 km/h and the speed should not exceed 2500 rpm.

Avoid emergency braking and rapid acceleration. The grinding cycle is divided into three stages. That is, the initial 100 kilometers, the initial run-in of silver is 200 kilometers, and the run-in forms an oxide film of 3000 kilometers.

Notes during closure:

1.Start warming up. Once the engine is started, you can start driving as long as you can maintain a steady speed. Before the water temperature rises, control the speed appropriately, and you can drive normally after the water temperature is normal. During the run-in, avoid slamming on the accelerator and brake.

2.Do not drive at high speeds. The engine speed during the break-in period should be strictly controlled between 2000 and 4000 rpm.

3.Avoid overloading, as a new car can damage parts when driven at full capacity.

4.Do not disassemble the speed limiter in advance. A governor is a throttling device that is installed between the carburetor and the intake pipe. After the initial 1000 km, it will be disassembled in conjunction with the initial driving maintenance.

5.Avoid long-distance running. Long driving in a new car increases the duration of the engine's work, resulting in increased wear and tear on components.

6.Avoid emergency braking.

7. Shift gears in time, shift gears appropriately in time, and avoid driving in high gear, low speed, low gear and high speed. Do not use one gear for a long time.

8.Try to add better quality gasoline.

9.For the first time driving and maintenance, during the run-in of the new car, be sure to check whether the oil, cooling liquid, and battery electrolyte are sufficient, and if you find that you are missing, you must replenish it in time.

Millions of car purchase subsidies.

Due to processing and assembly errors, the frictional resistance of the moving parts of the new car is always much greater than normal when it starts to run, and the running-in (also known as walking) effect in the early stage of the car will have a great impact on the service life, working reliability and economy of the car. Therefore, the run-in regulations must be strictly implemented when using new cars.

1. Run-in regulations for new cars within 1000 kilometers:

1) Never drive at full speed.

2) - Generally not to drive at a speed of more than 100 km/h.

3) Avoid driving at high speeds in all gears.

2) The run-in of the vehicle between 1,000 and 15,000 km: it can be gradually increased to the maximum speed or at the maximum permissible speed of the engine.

2. After the run-in period, attention should be paid to:

1) When driving a car with a tachometer and shifting into the approaching high speed, the maximum engine speed allowed for a short time is 5 500 rpm when the pointer reaches the red indication zone at the latest. The maximum permissible speed in each gear is 40 kmh in the first gear, 65 kmh in the second gear, 100 kmh in the third gear, 135 km/h in the fourth gear, and 165 kmh in the fifth gear.

2) Avoid running the engine at unnecessarily high revs, and switch to high gear early to save fuel and reduce noise.

3) Do not drive the engine speed too low, and only change to low gear when the engine is working hard.

4) The speeds and rotational speeds listed in the instructions are only applicable to engines with normal temperatures. When driving cold, do not allow the engine to work at the highest revs, whether in neutral or in other gears.

5) New tires don't have optimal adhesion when they start with use, so new tires also need to be walked, slower for the first 100 km, and driven with care.

6) The new brake friction plate also needs to be run-in, in the first 200 kilometers of driving, there is not yet the ideal friction, if the braking effect is slightly worse at this stage, the pressure of the pedal can be appropriately increased. The same applies after each subsequent replacement of the brake pads.

7) Under possible conditions, the new car should avoid continuous driving for a long time during the run-in period, so as to avoid the engine and chassis parts continue to work for too long, resulting in the aggravation of the wear of the parts, and directly affect the service life of the car. Also avoid running at full load, generally in the first 1000 kilometers of driving, it is best to run below 80% of the rated load. Also, try to avoid driving at high speeds, and don't go faster than 70% of the top speed with the throttle open for the first 2,000 km/h.

8) during the run-in of the new car, the driver should heat up in situ after the new car starts at the beginning, and then start after the water temperature rises to the working temperature range, and should choose a good road surface during driving, and slow down when the road condition is poor; When driving, the throttle should be smaller, the operation should be light, once the engine or chassis sound is found to be abnormal, it should be stopped to check the fault in the embryonic period.

How to drive a new car during the run-in period? Pay attention to these 8 points, and the new car can be driven for a few more years!