What is the difference between pavement tape and pavement caulking adhesive? 20

In terms of crack width, when the crack width is generally less than 8mm (mm), you can choose to use Jia>G to paste the seam tape, without slotting or any equipment.

In terms of pavement material, the general cement pavement uses grout glue, and for cement pavement, the selection of seam tape will be a little picky about the pavement, so it is more universal to use grout glue;

If it is an asphalt pavement, choose according to the crack width as mentioned above.

The hot-melt joint filling glue still needs to be heated and melted before it can be used, which is suitable for large cracks in the pavement and needs to be slotted when used; Cold filling glue can be used directly, but the cost is high; The seam tape is easy to use and easy to use.

When using pavement grout glue to repair pavement cracks, it is necessary to heat and melt the grout glue into liquid, which will produce a large amount of smoke odor harmful to the human body while heating and melting. During construction, most of the cracks in the pavement are repaired by slotting and filling, so that a large amount of dust will be produced during slotting, which has a great impact on the environment and the human body.

The use of Jiage pavement seam tape for pavement crack repair, smokeless, tasteless, dust-free, harmless to the human body. The material is used to repair pavement cracks, no need to slotting and expanding joints, dust-free construction, high efficiency, and good sealing effect of cracks.

Road grout glue is a new type of road maintenance product, which can effectively repair road cracks, and is a product that many road maintenance units like very much.

l Road caulking glue is used to fill road gaps.

Road grout glue is based on modified asphalt as the main raw material, the appearance is black solid, the road grout glue has a good elastic recovery rate, can well avoid the adverse effects of day and night temperature difference on pavement repair, can be widely used in highways, squares, airports and other concrete expansion joint caulking fillers, but also suitable for basements, kitchens, bathrooms and other indoor projects moisture-proof and seepage-proof.

According to our years of experience, the smaller longitudinal joints and transverse joints are generally closed with asphalt tape, road grout glue or hot asphalt. For wider cracks, it is necessary to fill the asphalt and stone chip mixture for treatment. For large-scale cracks and network cracks, it is generally treated with additional sealing layers.

The road section with serious network cracks and cracks should be reinforced or renovated.

Road caulking glue, also known as road sealant and road caulk, is mainly used for the repair of pavement cracks.

The infusion process is simple, the curing speed is fast, the bonding strength is high and the toughness is good after curing, and the crack resistance reaches low temperature -30, and the stability is strong at high temperature 70 degrees. Good acid and alkali resistance, waterproof, oilproof and dustproof, resistant to damp heat and atmospheric aging, with good tensile resistance, pressure resistance and adhesive strength.

After the filling of the grout glue is completed, the surface is sprinkled with cement powder or sand to form a thin upper layer, which can effectively prevent wheel printing and enhance the friction on the road surface.

1. Easy to operate: one sticker is firm. The use of surface laminated seam tape on the road surface can be laid after cleaning, eliminating the need for traditional heating equipment for caulking material.

2. The construction speed is fast: it is several times that of grouting. Due to the extremely convenient operation of the road seam tape, the ergonomic efficiency is greatly improved compared with the traditional crack treatment process.

3. Reliable quality: beautiful and durable. The use of road seam tape on the road surface can keep it not deformed and not brittle, and will not be picked up by the wheels, effectively prevent the vines of cracks on the road surface, and overcome the phenomenon of gnawing edges after slotting and filling.

At present, the repair agent used in the repair of road cracks is a kind of polymeric slurry, adding cement or sand and so on can produce a strong structure and elasticity, and can also be painted to any desired thickness, and even it can be painted as thin as paper, the crack repair agent made with it itself has many advantages such as durability and waterproofing, and it is not easy to take off the place where it is coated with the raw edge, in order to ensure the final repair effect, when we choose the repair agent manufacturer, In addition, when adding cement and mortar, it must be added according to the proportion, and the proportion can also be adjusted appropriately according to the situation, so that it may be matched with a repair agent that can better meet the needs.

The GAGE road joint grout adhesive is made of heavy asphalt as the base material, plus various auxiliary materials, and the polymer chan pin modified by a special production processStrong adhesion, stable performance, water and abrasion resistance.

It is a caulking material used to repair cracks in the road, but it is gelatinous, similar to asphalt, and it can be said that its main ingredient is asphalt.

The joint filling adhesive is a modified asphalt rubber cured at room temperature, which has a long operating time, ultra-low viscosity and strong penetration, and can repair cracks of about 5mm. After curing, the material has small shrinkage, excellent mechanical properties, toughness and impact resistance, and excellent acid and alkali resistance and aging resistance. This product does not contain any volatile solvents, which is environmentally friendly.

The scope of application is mainly used in concrete bridges, houses, water conservancy, pavement, bridges, wharves and other projects in crack injection repair, concrete internal honeycomb, loose and other defects of reinforcing glue injection, etc. The pavement crack treatment method generally adopts grout or excavation repair to prevent water from further eroding the roadbed, thereby prolonging the service life of the asphalt pavement.

Road grout adhesive is a polymer sealant used for cement, asphalt, concrete pavement and airport runway pavement crack repair and treatment.

The sealant of Xianggong Machinery is a composite material of solid modified asphalt and thermoplastic rubber, which has fast hot melting, strong adhesion and good deformation recovery performance. Compared with other types of sealants, this type has the characteristics of low consistency and easy penetration into various cracks. In summer, its high-temperature softening point can reach 96; In winter, it can withstand low temperatures up to approximately -23, so it is more suitable for temperate environments with large temperature differences.

To put it simply, it is to repair cracks in the road surface.

The temperature of the joint glue should reach 190 during construction, but not more than 204The size of the notch should meet the design requirements, Tai'an Luming joint filling glue meets the design requirements, and the product quality meets the national standards.

To put it simply, Sao road joint filling adhesive is a polymer sealant used for cement, asphalt, concrete pavement and airport runway pavement crack repair and treatment.

Asphalt pavement. The main function of the joint filling glue is to repair and seal the pavement cracks, which are common diseases of the road, which not only affect the appearance but also cause different degrees of damage to the pavement. If the pavement cracks are not treated in time, water will seep and the road will be corroded twice due to water damage.

Huatong Silicone. Gap filling glue easily solves large and small cracks, is a kind of waterproof performance of fast curing oily material, it can absorb moisture in the air reaction curing, weather resistance.

Strong, lifespan up to 8-10 years. And it does not flow at high temperature, does not brittle at low temperature, and is resistant to displacement. Huatong silicone cold filling joint adhesive is available in black, gray and color, and a variety of colors can be selected for you.

Silicone cold fill joint adhesive is reliable, safe and environmentally friendly, and can be used not only for asphalt pavement but also on cement concrete pavement and airport runway with high requirements.

Jiage asphalt pavement grout adhesive can repair cracks, but the premise is that the pavement cracks must be cleaned, not wet, and kept dry.