How do I set my computer stuff to FTP and share it with others?

1. First open the Control Panel and find the Programs - Turn on or off Windows function options.

2. Find the Internet information service item and check all the sub-functions under it.

3. After waiting for a short time, after the Sakurama service configuration is completed, right-click on my computer to open the management, and select the Internet information service to add the FTP site on the right**.

4. Set the FTP name and the physical path where the shared file is stored.

5. Identity verification: If you need a password, you can check the "basic" together.

6. After the setting is completed, click the advanced settings on the right, and set UTF-8 to false so that you can put Chinese files.

7. Enter the FTP path to sell the stalker to realize FTP file sharing. Finish renderings in the rock.

1. Go through the taskbar "Start - All Programs - Management Tools", and then find the Internet Information Service (IIS) Manager under it, after opening the Manager, you will find that there is an option of "FTP Site" at the bottom, through which you can set up an FTP server.

2. Right-click on "Default FTP Site" and select "New FTP Site".

<>4. Give the FTP site a name, which is set to soft FTP.

5. This FTP site sets an available IP address, it is possible to select the actual address, if you are not sure, you can also select "all unassigned", so that the system will use all valid IP addresses as the stupid cluster address of the FTP server. At the same time, the number of ports open to the public service of the FTP server is also set here, which is 21 by default.

6, the next is ftp user isolation settings, the Chinese help information here is very clear, choose not to isolate the user then the user can access the FTP home directory of other users, choose to isolate the user is not able to access each other to judge the eggplant resources, for security needs to isolate the user, should choose the second item "Quarantine user".

7. Select the home directory of the FTP site, which can be modified, and the default is the ftproot folder in the inetpub directory under the system directory. Use the "Browse" button on the right to set to a different directory, such as "D: Manuscript".

8. Then set the user access permission, there are only two kinds of permissions to set, in order of "read" and "write", according to the actual setting.

9. Go back to the Internet Information Service (IIS) Manager and right-click on "Softe FTP" under the FTP site and select Start to enable the FTP.

10. FTP testing, generally speaking, if you want to set the established FTP, it is done through the "attributes" of the FTP site. Right-click on the FTP site and select "Properties".

11. In the "Security Account" tab in the FTP property window, you can set whether the FTP allows anonymous login, or select the account used for anonymous login. Of course, since the anonymous login function is enabled on the FTP by default, you can log in by entering anonymous in the username and filling in an email address in the password.

To set your computer to FTP, you can follow these steps:

1.Install FTP server software: You need to install FTP server software, such as FileZilla Server and Microsoft FTP Service.

According to different software, the specific operation may be different, and in general, some basic configurations need to be carried out.

For example, you can specify a listening port for an FTP server, configure user accounts and permissions, and set address filtering rules. For details, please refer to the documentation provided by the FTP server software.

3.Enable FTP server with server: After completing the FTP server configuration, you need to enable the FTP server so that it can be accessed by other computers.

In general, the FTP server software provides the option to turn the FTP server on or off, you just need to follow the prompts.

4.Configure a firewall: You need to configure a firewall on your computer to allow traffic from the FTP server to pass through. For details, refer to the documentation of the firewall software or hardware you are using.

5.User access: When your FTP server is up and running, other computers can send requests to your computer through the FTP client to access your files.

In the FTP client, you need to enter the IP address, port number, username, and password of the FTP server.

To set up your computer as an FTP server, you need to install and configure the FTP server software, enable the FTP server, and configure a firewall. Users can access the FTP server through the FTP client to upload files and perform ** operations. For specific steps, please refer to the documentation of FTP server software and firewall software.

Preparation materials: computer,

1. First, open the control panel.

2. Switch the viewing mode to "Category", then find "Programs", and click to enter.

2. Then open "Turn on or off Windows features" under "Programs and features".

4. Drag the scroll bar in the panel of "Turn on or off Windows features", find "Internet Information Services", and click the "+" sign in front of it to travel the code.

5. Enter the name of the site, and then select the "Physical Path" of the "Content Directory", in fact, after we open IIS, the system will create an InetPub folder in the C drive.

6. Select your own computer IP in the IP address drop-down (your computer is best set to a fixed IP). After checking the automatic start of the FTP site, the FTP site will be opened every time the cluster is turned on, and there is no need to turn it on.

7. Identity verification can only check basic or both. In the Allow Access there drop-down select "Designated User" and enter the alternate account "newuser" that we created earlier. Permissions: Chi Zheng stool just tick "Read".

8. At this point, the ** has been created, and now you can see the FTP site we configured below.

To set up your computer as an FTP server, you need to follow these steps:

1.Install FTP server software: You can choose a free FTP server software, such as FileZilla Server.

2.Configure the FTP server: After the installation is completed, Pulse needs to carry out some basic configurations, such as setting the port number of the FTP server, allowing users, setting the user's permissions, etc.

3.Enable the FTP service: After the configuration is complete, you need to enable the FTP service, so that other devices can access your telephonic dispersion brain through the FTP protocol.

5.Test the FTP server: After completing the above steps, you need to test, you can use the FTP client software to connect to the FTP server, and test whether the upload, ** file and other functions are normal.

To set up your computer as an FTP server, you can set it up by following these steps:

Install FTP server software: Install FTP server software on your computer, such as FileZilla Server, IIS FTP, etc.

Configure FTP shared directory: Select the folder or directory to be shared, and set the corresponding permissions in thick.

Configure FTP transfer mode: Select an FTP transfer mode, such as active mode or passive mode, and set the corresponding port range.

Start the FTP server: After saving the configuration, start the FTP server and wait for the client to connect.

Connect to the FTP server: On the client computer, use the FTP client software (such as FileZilla, Winsc, etc.) to connect to the FTP server, and enter the corresponding password to access the shared folder or directory.

Here's how to set your computer to FTP:

Click on "Start - All Programs - Management Tools" in the taskbar, and then find the Internet Information Services (IIS) Manager under it, and when you open the Manager, you will find an option for "FTP Site" at the bottom. Respect for oranges.

Click on the "FTP Site" option to enter the FTP page.

On the FTP page, enter the FTP server address, username, and password.

Click the "Login" button, the anonymous login window will pop up, Wu Li select No, so that only users with your permission can log in to the FTP.

Any folder in the system can become a shared folder with the help of the FTP service, you only need to right-click on the disk location and select "New Folder" to create a folder, and the setting method of FTP sharing can refer to the following operations:

1. To use the FTP service on Win7, you need to install the IIS service first and open it"Control Panel", select"Procedure" ->"Turn Windows resources on or off", find "Internet Information Service" in the pop-up form, and select "FTP Server."", and then tap"OK", at which point Windows begins to update the list of feature resources.

2. Then, add the FTP site in the IIS Manager in the pop-up window, and select the FTP shared directory.

1. To use the FTP service on Win7, you need to install the IIS service first and open it"Control Panel", select"Procedure" ->"Turn Windows resources on or off", find "Internet Information Service" in the pop-up form, and select "FTP Server."", and then tap"OK", at which point Windows begins to update the list of feature resources.

2. Then, add the FTP site in the IIS Manager by yourself.

In the pop-up window, select FTP to share the directory.

Enter the computer, right-click "Add a network location" in the blank space, then "Next", then click "Select a custom network location", next, enter your FTP address in the next box, next, and then set up a login account, if you don't need to log in, select anonymous, and the next step can be completed.

You can use the explorer's. It's the same as online neighbors.

You can set up an FTP server with a public IP, as long as you know your FTP address, you can connect, but you need a username and password.

First, find an FTP software seru

Second, open the router at your home and you're OK.

Two conditions, have an external IP and install FTP server software.

Introduction to FTP ServerFTP Server is the FTP protocol (a standard and guideline used for file transfer between computers) on different types of computers, using different types of operating systems, to transfer different types of files to each other. It provides a rich information resource for distributed business activities through the Internet. The launch of CyberIP has made the collection of Internet information resources truly convenient, timely, interactive, anytime, anywhere.

Applicable objects: large, medium and small enterprises, SOHO families, and ordinary Internet users who are ready to develop FTP servers;

** and public service agencies Running support environment client software: for users who need multiple domain namesInternet connection method:

A normal dial-up modem uses ISDN, ADSL, or a higher bandwidth network connection to preferably CHardware configuration: Pentium 133MHz or higher D

System Platform: Setting Up an FTP Server with SERV-U Demo Windows 2000 + Setting Up an FTP Server Demo.