How to use a mobile phone to kick off people who rub wifi

Open the [Settings] of your phone, tap [Wi-Fi], and connect to your ownWi-Fi；Open [Anti-Rubbing Master], enter the [Device List] page after detection, click the device you want to block, select [Block], and after the software obtains permission, you can prevent unknown devices from rubbing the network.

Wi-Fi (pronunciation: wafa, French pronunciation: wifi), also known as "mobile hotspot" in Chinese, is the trademark of the Wi-Fi Alliance manufacturer as a brand certification for the product, is a wireless LAN created in the standard.

Technology. Due to the close relationship between the two systems, Wi-Fi is often used as a synonym for IEEE standards. "Wi-Fi" is often written as "WiFi" or "WiFi", but they are not recognized by the Wi-Fi Alliance.

Not every product that matches the IEEE applies for Wi-Fi Alliance certification, and a product that lacks Wi-Fi certification does not necessarily mean that it is not compatible with Wi-Fi devices.

IEEE devices are installed in many products on the market, such as personal computers.

Printers, laptops.

and other peripherals that can be used to access the Internet wirelessly.

Hello, you don't want others to use your wifi, you can reset your wifi password, increase the difficulty of the password when setting, and set some more characters, symbols, etc.

How do you kick out the people who rub the wifi? You can change your home's wifi password to it, and you can change the password.

You can change the password, that's fine, otherwise you can control it unless you use a computer.

I just checked it for you, you can change your password, and then log in yourself.

In this case, the first thing you can do is to increase the difficulty of the wifi password, and then set it a little more. Then change the password.

The wifi at home is always rubbed by people, teach you to use your mobile phone to kick off the network equipment, so that your network speed is no longer slow.

If you want to use your phone to kick out the person who rubs the wifi, why don't you change the password of your wifi?

2. After that, enter the account password to log in to the wifi, as shown in the figure below

3. Then select the device function in the red box, as shown in the image below

4. Then you can see the current mobile phone model connected to wifi, as shown in the figure below

5. Click to enter the details function, if you want to propose wifi, select the disabling function in the red box, as shown in the figure below

Tools required: tp-link.

The specific steps are as follows:

1. Click to open tp-link, and log in with the mobile phone number on the page. For added convenience, you can also use your administrator password to log in.

2. Then enter the password entry page, and enter your WiFi management password on the page. If you forget your password, you can click "Forgot Password" to retrieve it.

3. If you choose to use the WiFi administrator password to log in, then after entering the "Local Device List", click on your WiFi device. Then click "OK" in the popping up window.

4. After clicking "OK", enter your WiFi administrator password. Once you have finished entering, click "Sign In".

5. After the login is completed, enter the "Status" interface of TP-Link. Then find "Devices" below, and tap "Devices" once you find it.

6. After entering the "Device", you can see the device that is connecting to your own wifi in the interface. If you find a device that is not your own, then the device is rubbing the net.

7. After finding the device that rubs the net, click on the device. Then there is a rightward arrow to the right of the traffic transfer arrow, click on the arrow.

8. After clicking, you will enter the management interface of the device that rubs the network. At the bottom of the interface, it displays "Disable this device from surfing the Internet", so that the net-rubbing is successfully kicked off.

Common solutions are as follows:2. After that, enter the account password to log in to the wifi, as shown in the figure below

3. Then select the device function in the red box, as shown in the image below

4. Then you can see the current mobile phone model connected to wifi, as shown in the figure below

5. Click to enter the details function, if you want to propose wifi, select the disabling function in the red box, as shown in the figure below

You can enter the ** management network, and you can disable the devices that rub the network.

You can also use your mobile phone to log in to the router management page, and then block the MAC of the other party's Internet device.

Some phones have something that can be set and some that don't.

1. First of all, open the browser and enter the routing login interface and enter the password.

2. In the red box, you will see the device that has been connected to the network.

3. Click on the disabled sign pointed by the arrow, and the device will be disabled.

4. If the device is disabled incorrectly, click "Banned Device" and click the reply button pointed by the arrow.

5. If you don't use the wireless network temporarily, you can turn off the wireless network to put an end to all network rubbing behaviors.

If you find someone rubbing your Wi-Fi network, there are a few ways you can kick them out:1Change Wi-Fi Password:

This is the easiest way to do this, just change the Wi-Fi password and the surfers will no longer be able to connect to your network. You can change the password in the router's management interface. 2.

Enable MAC address filtering: Each device has a unique MAC address, you can enable MAC address filtering in the router's management interface, only allow known devices to connect to your network, so that users can't connect to your network. 3.

Use the router's client list: Many routers offer a client list feature where you can see which devices are currently connected to your network and manually disconnect the surfers. 4.

Use network monitoring software: You can use network monitoring software to monitor your network, see which devices are connecting to your network, and manually disconnect users from the web. It should be noted that the above methods require you to have router management privileges.

If you're not sure how to do this, it's a good idea to check your router's manual or consult your network service provider's technical support staff.

If you find someone rubbing your Wi-Fi network, here are some things you can do:1Change Wi-Fi Password:

This is the most basic precaution. Changing your Wi-Fi password instantly blocks access from surfers and ensures that only people you authorize can use the network. 2.

Hide Wi-Fi names: Hiding Wi-Fi names can also reduce the discovery and access of surfers, but be aware that this is not a completely safe way to do this, as some advanced users can still use some tools to discover hidden Wi-Fi names. 3.

Use MAC address filtering: Enable MAC address filtering in your router's settings to allow only devices in the whitelist to connect to the network. This requires you to manually enter the MAC address of each device on the router and update it when you need to add a new device.

4.Use software: Install some special software on your computer or mobile phone, such as Wi-Fi kill,, etc., which can identify and kick people out of the network by scanning the device and MAC address in the network.

In short, in order to protect your network security, it is recommended to change your Wi-Fi password regularly, set a strong password, and use a variety of methods to prevent network access.

(1) Check the router settings interface.

In the router wireless settings, look at how many terminals are surfing the Internet in the wireless client, and if the number of devices in the list is more than your original device, someone must be rubbing the network. Some routers can even directly prohibit certain terminals from accessing the Internet and kick them out.

2) Computer management software viewing.

Double-click to open, you will be prompted to select your network card, generally the default one, select OK. Wait a while, and you'll be able to see which terminals are logging into your router on the software interface and know the detailed names of each terminal. If you are sure that someone is rubbing the Internet, select the guy who is rubbing the Internet, and you can click "Disable Internet Access" to kick the other person out.

You can also assign internet speeds and speed limits to your terminals.

If you have 360 Security Guard installed on your computer, you can also find the anti-rubbing function when you find the traffic firewall.

Of course, powerful smartphones also have corresponding apps, and we take Tencent WiFi Manager as an example. Click on "My" account at the bottom of the interface, and then click on "Router Management", and after a while, a list of all terminals will be displayed. You can kick them out if you find them, but you need to log in to your router admin password, which is usually admin, which can be found on the belly of your router.

With this app, you can also change the name and password of your wireless network, hide Wi-Fi, and more.

You can log in to your router to see how many wireless devices are connected to it, and if it's not your own, you can blacklist it, then he can't rub your wifi anymore.

You can turn off your own hotspot, or you can click on the hotspot settings to blacklist the person who rubs it, so that he will not be connected to your network.

People who can't bring up wifi, but you can block it, and he can't connect to the wifi after blocking.

You can log in through your phone, and then you can set up your wifi without letting anyone else come.

Just go directly to the business hall to contact and change the password, people don't talk much, and they are very speechless for the people who rub it.

Hello, each other is a person who rubs wifi, so it is not the owner of wifi, and the owner of not wifi cannot perform the operation of kicking each other out of wifi connection.

Don't want to be rubbed by wifi? Turn on this setting and immediately kick out the device to increase the internet speed.