Why does the TV broadband drop as soon as you turn it on

It should be caused by the interference of the TV line to the broadband,Try the TV in another place,It may be the reason why the home line is interfered with by the TV,If not, report for repair。

Whether the cell optical fiber set-top box ** line is all integrated If so, there must be something wrong with the voltage regulator of the TV It has to be repaired or replaced If it is not optical fiber, buy a broadband crossover Very cheap Generally 10 yuan.

Is the power cord head of the TV two-plug or triple-plug? You can try to find a socket to convert it, change the three plugs to two plugs, or replace the two plugs with three plugs, and then connect them to the original socket.

If the network is disconnected when you use ppstream, the flow may be disconnected. If it's a Kaba4sky fireproof 1 wall, turn off: "Real-time defense against cyber attacks".

Or turn off the Kaba 8sky in front of the b, and wait for the TV to come out, and then turn it off. If I is Kaba4sky, then I please lower the PPS connection thread, square 8 method: open UPPS >> Tools >> Options >> Connection settings, and then change those default 3 digits to a smaller i 1M.

Delete the PPS rules in your own N Fire 3 Wall Rules and use them"Rogue software cleanup assistant"Clean up your own m's machine q, and then use the optimization 0 big h division to optimize the system 7. Then load the pps again for installation, when installing, the fireproof 0 wall will be in the O open R state, pay special attention to the last F step when installing, not O should be too fast, the fireproof 8 wall will jump out of a l dialog box, so that you can pass the pps. This step is not x to be less than 4a.

There is also an M test method 0 is to load BT to see the speed, because 0 is now part 2 broadband operators have X restrictions on BT. If it still doesn't work, please use the 840 stable version first. le┯

Is your TV broadband-related? The first time I've heard it, your TV is so advanced, do you want to use the Internet? Cattle.. I guess it's just a matter of voltage.

Is your home's broadband connected, from the cable TV line??? Telecom will definitely not take the cable TV line.

Summary. The TV shows what is the reason for the broadband outage.

Hello dear, it means that the wireless network is set to deactivate by the user.

The Wi-Fi connection has been disabled for the following reasons and how to resolve it:

1. The use of the wireless network system is not turned on.

Solution: Go to the network connection page, right-click the wireless network connection, and select "Enable" from the pop-up list.

2. The computer wireless network hardware is not turned on.

Solution: Press and hold the FN key on the keyboard and press F2 to turn on the Wi-Fi hardware device.

Most Wi-Fi outages are caused by users inadvertently shutting down Wi-Fi hardware.

The TV shows what is the reason for the broadband outage.

Hello, dear This question is up to me, it takes a little time to type, and please be patient.

The TV shows that the broadband is reported to be deactivated, which means that the wireless network is set to deactivate by the user. The wireless network connection has been disabled for the following reasons and solutions: 1. The use of the wireless network system is not turned on.

Solution: Go to the network connection page, right-click the wireless network connection, and select "Enable" in the pop-up list. 2. The computer wireless network hardware is not turned on.

Solution: Press and hold the FN key on the keyboard and press F2 to turn on the Wi-Fi hardware device. Most Wi-Fi outages are caused by users inadvertently shutting down Wi-Fi hardware.

I hope I can help you.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your work is very important to me, and your support is also the dynamic and vertical momentum of my progress. Finally, I wish you good health and a good mood!

Summary. Hello dear, Telecom broadband TV is always displayed for the following reasons: 1

Router problems: If the router is not set up correctly or malfunctions, the network will be unstable and the TV will not be able to connect to the network. You need to check if the router is working properly and if you need to replace or reset the router.

2.Unstable network signal: If the network signal is unstable, the network connection of the TV will be unstable and disconnected.

You need to check whether the network signal strength is stable, and if you need to replace your router or adjust your broadband speed. 3.TV software glitches:

Problems with your TV's software may result in an unstable network connection and you may need to reinstall or upgrade your TV's software. 4.TV hardware failure:

If there is a problem with the hardware of your TV, it can also cause an unstable network connection. You need to check whether the TV and other hardware devices are normal, and whether the hardware equipment needs to be replaced or repaired. 5.

ISP issues: If there is an issue with your service provider's network, such as network congestion, it can also cause an unstable network connection to your TV. You will need to contact your service provider to inquire about network maintenance.

In short, if the telecom broadband TV always shows that the network is disconnected, you need to try to check the above aspects first, find out the problem, and take corresponding measures to solve it. If the problem cannot be solved, it is recommended to consult technical support personnel or relevant manufacturers for more detailed analysis and solution.

What does that mean? Hello dear, Telecom broadband TV is always displayed for the following reasons: 1

Router problems: If the router is not set up correctly or malfunctions, the network will be unstable and the TV will not be able to connect to the network. You need to check if the router is working properly and if you need to replace or reset the router.

2.Unstable network signal: If the network signal is unstable, the network connection of the TV will be unstable and disconnected.

You need to check whether the network signal strength is stable, and if you need to replace your router or adjust your broadband speed. 3.TV software glitches:

Problems with your TV's software may result in an unstable network connection and you may need to reinstall or upgrade your TV's software. 4.TV hardware failure:

If there is a problem with the hardware of your TV, it can also cause an unstable network connection. You need to check whether the TV and other hardware devices are normal, and whether the hardware equipment needs to be replaced or repaired. 5.

ISP issues: If there is an issue with your service provider's network, such as network congestion, it can also cause an unstable network connection to your TV. You will need to contact your service provider to inquire about network maintenance.

In short, if the telecom broadband TV always shows that the network is disconnected, you need to try to check the above aspects first, find out the problem, and take corresponding measures to solve it. If the problem cannot be solved, it is recommended to consult technical support personnel or relevant manufacturers for more detailed analysis and solution.

Summary. Pro: Telecom broadband TV always shows that the network is disconnected for the following reasons:1

Broadband line failure: If you find that all the devices are not connecting, you can check the broadband line first. If the line is damaged, it may cause the connection to be unstable or unconnected.

2.Router failure: If your TV is connected to a Wi-Fi network, the router is also involved.

If the router fails, then it can cause the connection to be interrupted. You can try to fix the problem by restarting your router. 3.

TV setup issues: In TV settings, you need to configure the correct network settings, such as IP address, DNS, etc. If these settings are incorrect, the network connection may be dropped.

Kiss! It is recommended that you try to restart the router and TV first, and then check the network cable, power supply, and other devices to determine whether they are normal. If the problem persists, you can call telecom customer service** to ask and ask for help<>

What does that mean? Pro: Telecom broadband TV always shows that the network is disconnected for the following reasons:1

Faulty broadband lines: If you find that all the devices are not connecting, you can check the broadband synovial fluid lines first. If the line is damaged, it may cause the connection to be unstable or unconnected.

2.Router failure: If your TV is connected to a Wi-Fi network, the router is also involved.

If the router has a landblock, then it may cause the connection to be interrupted. You can try to fix the problem by restarting your router. 3.

TV setup issues: In TV settings, you need to configure the correct network settings, such as IP address, DNS, etc. If these settings are incorrect, the network connection may be dropped.

Kiss! It is recommended that you try to restart the router and TV first, and then check the network cable, power supply, and other devices to determine whether they are normal. If the problem still exists, you can call telecom customer service** to ask and ask for help<>

Retry dear, is that still the case?

It was all right<>

Not compatible with other software.

This is when your computer mistakenly deleted system files, or system files were corrupted by stubborn Trojan horses.

There are many reasons, but poor internet speed is the biggest reason.

Is it a telecom's network TV?,You can call 10000 to report for repair.。

First of all, look at the signal light of the set-top box is a red light or a green light, if it is a red light, you power off and restart, see how much the progress bar card is, the same is true for the green light, if not, you need to call 10000 to report the fault to customer service.

Expansion: 1. There is no strict definition of broadband. From a general point of view, it is the bandwidth that can meet the needs of various ** transmission on the network that people can feel, so it is also a dynamic and developing concept.

2. On January 7, 2015, the FCC (Federal Communications Commission) made an annual broadband progress report, in which the current chairman Tom Wheeler said"Broadband"The original downlink speed of 4Mbps has been adjusted to 25Mbps, and the uplink speed of 1Mbps has been adjusted to 3Mbps. The new standard for broadband networks in the United States: 25Mbps downlink and 3Mbps uplink.

Summary. Hello, if the TV keeps popping up the prompt of successful broadband access, it may be because the network connection is unstable or the network settings of the TV are incorrect. Here are some possible workarounds:

1.Check your network connection: Make sure that your network connection is stable and that no other devices are using your network bandwidth.

You can try restarting your router or adjusting the position of your router to get a better signal. 2.Check your network settings:

Make sure your TV's network settings are correct. You can try setting up your network connection again, or contact your network service provider for help. 3.

Update your software: If your TV's software is outdated, it can cause network connection issues. You can try updating your TV's software for better performance and stability.

4.Reset your TV: If none of the above works, you can try resetting your TV's network settings.

Note that this will erase all network settings and login information, and you will need to set up your network connection and login information again. If none of the above works, we recommend that you contact your TV manufacturer or internet service provider for help.

Good. Can you provide us with the brand of the TV?

Xia Shan. Hello, if the TV keeps popping up the prompt of successful broadband access, it may be because the network connection is unstable or the network settings of the TV are incorrect. Here are some possible workarounds:

1.Check your network connection: Make sure that your network connection is stable and that no other devices are using your network bandwidth.

You can try restarting your router or adjusting the position of your router to get a better signal. 2.Check your network settings:

Make sure your TV's network settings are correct. You can try setting up your network connection again, or contact your network service provider for help. 3.

Update your software: If your TV's software is outdated, it can cause network connection issues. You can try updating your TV's software for better performance and stability.

4.Reset your TV: If none of the above works, you can try resetting your TV's network settings.

Please note that this will clear all network settings and login information, and you will need to set up your network connection and login information again. If none of the above methods work, it is recommended that you contact your TV manufacturer or internet service provider for help.

It may be that there is a problem with the network data link system, you should not operate it yourself, and contact the manufacturer for warranty.