How old is the water dispenser, and how to clean it?

1. The cleaning and disinfection of water dispensers should be carried out once in 1 or 2 months.

2. Cleaning and disinfection steps:

1.Drain the water in the water machine (including the water storage tank and the water in the inner tank) first, and then use cleaning agent to clean the accumulation of the water storage tank and the surface of the water machine.

2 Disinfectant disinfects the water storage tank and the lid of the water storage tank.

Chlorine dioxide disinfectant: Add 20ml of chlorine dioxide to 1 liter of water and soak with this solution for 30 minutes.

Effervescent tablets containing chlorine: Add one effervescent tablet to 10 liters of water, take 1 liter of this solution and soak it for 25-30 minutes.

In case of emergency, soak in boiling water when there is no disinfectant.

3. After soaking in disinfectant, rinse with clean drinking water for multiple times, clean the remaining residual disinfectant, and then rinse with bottled drinking water.

3. Precautions for the use of disinfectants:

The chlorine-containing disinfectant solution is unstable and should be prepared and used now, and should not be mixed with alkali or organic matter.

4. Personnel who clean water dispensers and replace bottled water should pay attention to aseptic operation and wear gloves; After washing and disinfecting and replacing the bottled water, keep your hands out of the lid of the water storage tank as much as possible.

5. School (bottled water) water dispenser after a week.

6. Rest on Sundays, when using on Mondays, turn on the faucet of the water machine and let the water flow for more than ten seconds before drinking; The remaining water on the water dispenser during long holidays (** weeks) and winter and summer vacations can no longer be consumed, and the water dispenser should be thoroughly cleaned and disinfected before use.

6. If self-made direct drinking water or water filtration equipment is used, the filter should be cleaned once a week.

Water Dispenser Cleaning Steps.

Many people think that bottled pure water is hygienic, so after the water dispenser is used for a long time, there are many people who do not clean it, which is an incorrect understanding, and the water dispenser also needs to be cleaned, and the steps are not complicated.

1. Cut off the power supply of the water dispenser;

2. Insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, then close the faucet, and then hold the bottle with both hands and take out the water bottle upward;

3. Clean the outside of the water dispenser and the smart seat;

4. Pour 600ml of special cleaning and disinfectant into the water storage tank;

After a few minutes, turn on the red and green faucets until the disinfectant is exhausted;

6. Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser;

7. Rinse several times with boiling water or purified water; 8. Tighten the drain valve, and the disinfection and sterilization operation procedures are completed.

If you call for bottled water, let the people from the water delivery company help you out. It's free. Watch him do it once and you'll be there.

Otherwise, pour an appropriate amount of disinfectant into the inlet above the water machine, and then add water and soak for ten minutes (mainly to disinfect the pipe at the water outlet). Remove the lid and wash it well. After installation, fill it with clean water, turn on the hot and cold water outlet switch to drain the water, and open the lid of the water outlet hole behind the fuselage at the same time to drain the water faster.

Then turn off all the switches, and repeat the water to drain the water two or three times. General cleaning water machine to.

Once every three or four months, the high temperature in summer is easy to breed bacteria, then.

Wash once every one or two months. Answer supplement Wash it with white vinegar, and it would be better if it could be heated. It's usually available where you buy a water dispenser"Descalers"Sell.

Yes"Descalers"After diluting the water, wash it from the top, then flow out of the back of the fuselage, and wash it with clean water.

If it's not bad, it's fine; Flush it with more water, ,,, it,:Remove what can be removed. Wash inside and out, wash it once a month or two... You don't need to sterilize.

It is believed that after using the water dispenser for a long time, it is necessary to clean our water dispenser well. If the water dispenser is not cleaned for a long time, it is harmful to the human body, because there are a large number of invisible bacteria in the water dispenser. In addition, people with weak constitution should not drink water with a large amount of bacteria, because it is easy to have diarrhea and abdominal pain.

1. Unplug the power cord of the water dispenser first to put safety first.

2. Find a drain valve behind the water dispenser. Even if you haven't used it for two or three years, there may be water left in it, so turn it on and drain the water first.

3. Turn on the hot water switch and cold water switch, then turn on the smart seat of the water dispenser, that is, the mouth of the bottled water, take it down, and flush it with the water pipe. It is estimated that the rinse will take about 20 minutes. This is to wash away most of the dust and impurities in the machine.

Rinse repeatedly until the water in the cold and hot water switches is clean. You can add some hot water of about 50°C in the middle to clean those stubborn stains, so that the water temperature will not affect the pipes, and the stains will be cleaned more thoroughly.

4. Bring a new basin. We prepared some dish soap.

Clean the water dispenser. If you can't buy it, you can also pour the same amount of beer or white vinegar. Acids and alkalis in beer and white vinegar can be utilized.

Good disinfection effect. Then pour in an equal amount of tap water and stir well. Then pour the water mixed with detergent into the cabinet, gently shake the water dispenser, let the detergent fully evaporate in the water dispenser, and let it stand for 10 minutes.

5. We mix edible white vinegar with tap water in a ratio of 1:10, prepare a cleaning solution, about 10 liters (if you want to clean, you can prepare more), pour this cleaning liquid from the upper part of the water dispenser, use a basin to catch the flowing cleaning liquid at the drain, and repeat it two to three times.

6.Finally, wipe the water dispenser with clean water.

Rotate the bucket counterclockwise and put it in the sink diluted with disinfectant water, soak it for a period of time, then drain the disinfectant water, then open the rubber plug behind it to release a part of the water, then open the two water outlets, put the water again, and finally wipe off the water outside the water dispenser with a paper towel.

The water dispenser needs to be cleaned after being used for a long time, and it can be cleaned with lemon.

Cleaning, household cleaners, to prevent viruses, epidemics. Longan 84 and other water dispensers have not been used for a long time and need to be cleaned regularly, and it is best not to clean them with very toxic detergents

Why should water dispensers be cleaned and disinfected?

Microorganisms can enter the water dispenser through a variety of ways and continue to multiply, resulting in excessive drinking water microorganisms.

When changing the water, the inside of the water dispenser will be exposed to the air, and various microorganisms such as mold and bacteria in the air can take the opportunity to enter the water dispenser; After filling the bottled water, for every liter of water released, a liter of air enters the water in the form of bubbles, carrying a variety of microorganisms. Microorganisms that enter through a variety of ways will continue to multiply and proliferate in the water dispenser (on the inner wall and in the inner tank), and if the water dispenser is not cleaned for a long time, the microorganisms can seriously exceed the standard.

How to properly clean and disinfect water dispensers?

Structure diagram of a certain type of water dispenser.

1.Disconnect the power supply and unplug it.

2.Open the faucet (cold water valve, hot water valve) to drain the residual water in the dryer, if there is a water storage tank (cold water tank, hot water tank) in the water dispenser, you need to open the drain valve behind the fuselage to put it clean.

3.Remove the smart seat and wipe the inside and outside of the smart seat and the inner wall of the water storage tank with a clean towel (or alcohol cotton ball).

4.Use a bucket (or basin) to connect 3 liters of water, add 3 pieces of bleaching powder tablets (calculated according to 50% effective chlorine concentration, 1 gram per tablet; Thoroughly mash and add), stir and mix well to make a disinfectant with an effective chlorine content of about 500mg l.

5.Attach the smart seat to the water dispenser and close the drain valve. Pour the disinfectant into the water storage tank, let the disinfectant fill the hot water bladder, cold water bladder, and water storage tank, and let the smart seat fully soak in the disinfectant. Soak for 30 minutes.

6.Open the drain valve and drain the disinfectant.

7.Close the drain valve, fill the water storage tank with clean tap water, and open the drain valve to drain it. This step is repeated 3-5 times to fully wash off the residual disinfectant components to complete the disinfection process of the water dispenser.

The correct way to use the water dispenser.

1 Do not place water dispensers and bottled water in direct sunlight.

2 Bottles of water should be consumed within a week after opening.

3 Drink bottled water with boiling, try not to drink raw water or boiled water mixed with raw water.

4. Clean and disinfect the water dispenser every 3-6 months.

This is for sure, after the water dispenser is used for a period of time, there will be a lot of impurities and dirt inside it. Or it can breed germs and bacteria. It is necessary to regularly clean its water storage parts, drains, and water inlets.

A: Water dispensers need to be cleaned regularly.

The frequency of cleaning <> water dispensers should depend on factors such as water quality, frequency of use, and season, and it is generally recommended to clean and disinfect them every 3-6 months. Here are the detailed steps for water dispenser cleaning:

First, power off the water dispenser and disassemble it, and remove the water tank and water hunger orange pipe and other parts.

Pour out the water in the water tank, wash it with a neutral detergent or white vinegar mixed with water, wipe the inner wall of the water tank with a soft brush or sponge, and be careful not to scratch the surface of the inner wall of the water tank.

Remove the water pipe, rinse it with clean water, then clean it with neutral detergent or white vinegar mixed with water, wipe the inner wall of the water pipe with a soft brush or sponge, and be careful not to scratch the surface of the inner wall of the water pipe.

Soak parts such as water tanks and water pipes in the disinfectant, and disinfect them according to the instructions of the disinfectant, which generally needs to be soaked for more than 30 minutes to ensure that the disinfectant can fully kill bacteria and viruses.

Drain the disinfectant solution and rinse the tank and hose with clean water to ensure that both the disinfectant and the detergent are rinsed.

Assemble the cleaned water tank and water pipes and other components, and then connect the water dispenser to the power source.

It should be noted that when cleaning the water dispenser, use a mild detergent such as a neutral detergent or white vinegar, and avoid using detergents containing acidic or alkaline ingredients to avoid damage to the water dispenser. At the same time, it is also necessary to pay attention to the use of disinfectant, disinfect according to the instructions, and avoid using excessive disinfectant to avoid affecting human health.

<> recommends that the water dispenser be cleaned once every three months to six months. If it is a drinking pure light difference water machine in a public place, because the frequency of use is too high, all cleaning cycles should be shorter.

The steps to clean the water dispenser are as follows:

Unplug the power plug, remove the bucket, open the drain nozzle (usually a knob made of white plastic) behind the water dispenser, and drain the remaining water.

Remove the part of the water dispenser that touches the mineral water bucket, and carefully scrub the inside and outside of the inner tank and lid of the water dispenser with an alcohol swab to prepare for the next step of disinfection.

Prepare the disinfectant water according to the instruction manual of the decontamination effervescent tablet or disinfectant, introduce it into the water dispenser, and fill the entire cavity with the disinfectant water, and leave it for 10 to 15 minutes.

Turn on all the switches of the water dispenser, including the sewage outlet and the drinking water switch, and drain the disinfectant.

Continuously rinse the entire cavity of the drinking water locust fiber machine with clean water, and turn on all switches to drain the skin net flushing liquid.

Put a glass of water and smell for chlorine. If so, put water in it until you can't smell any smell before you can use it with confidence.

It is recommended to use disinfectant every once in a while to disinfect the water dispenser to ensure the safety and hygiene of drinking water.

The water dispenser needs to be cleaned at least once a month, and if the amount of use is relatively large, it is recommended to clean it every half a month to a month or lack of rubber to ensure the hygiene and safety of drinking water.

Here are the cleaning steps:

1.First of all, you need to drain all the water in the water dispenser, and then remove the parts for cleaning. It can be cleaned with drinking water or detergents, and it is recommended not to use ordinary detergents to avoid residual chemicals that may affect people's health.

2.Use a brush or sponge to clean the inner and outer walls of the water dispenser and various parts, especially the water inlet, outlet, faucet and other parts that are easy to hide dirt and dirt, and clean carefully until you can see that there are no stains.

3.After cleaning, rinse the inner and outer walls of the water dispenser and all parts repeatedly with clean water until all residues and detergents are washed off, and then wipe dry with clean gauze to cool off the water.

1.Frequency of cleaning.

Generally, household water dispensers are recommended to be cleaned every 2-4 weeks. If there are babies and toddlers in the house, it is best to wash them every 2 weeks.

If the water dispenser is used for a long time without combustion, such as a business trip, it should be thoroughly cleaned before using it after returning.

If you find dirt or odor in the machine, you should also clean it immediately and do not continue to use it.

2.Cleaning method.

Turn off the water dispenser and unplug it.

Remove the machine enclosure and internal parts such as water inlets, water storage tanks, chips, etc. Rinse with clean water and if necessary with a mild detergent.

If there is limescale or scum on the inner wall of the tank, it can be cleaned with diluted vinegar or citric acid, and then rinsed with water.

After all parts are washed, rinse them several times with clean water to ensure they are clean and residue-free.

Dry the individual components, reassemble the water dispenser and use it with electricity.

Before restarting the machine, run for 1-2 minutes and throw away the initial water to rinse away any residual flavors.

It should be noted that do not use cleaning agents that are too acidic and alkaline to prevent damage to the machine. When assembling, each part should be firmly installed to prevent water leakage.

If not used for a long time, disinfect with salt water is an option, but it must be rinsed thoroughly before the next use.

To sum up, household water dispensers should be cleaned every 2-4 weeks, thoroughly cleaned all parts, dried and reassembled for use. If the machine is idle for a long time or the water quality has an odor, it also needs to be cleaned in time. Regular cleaning can maximize the hygiene and safety of drinking water, so that the water dispenser can keep it in the best working condition.