How to make a C drive into a GHO? After the restoration, call up the GHO for restoration?

Make sure your system is all in good condition.

There are no fewer drivers and fewer vulnerabilities.

1.Then use a system disk.

Put it in the optical drive. Restart the read.

There's a ghost backup restore tool inside.

You go in. Here's how.

Choose first. The first disk

Then choose the second subordinate.

Bounce to the second of the lower levels.

It's the C drive backup operation.

Then select the path you want to save.

Saved name.

Once the progress bar is buffered, you'll have an image file where you saved it.

That's your C drive.

Or one-click ghost

Actually, it's all the same.

It's all one feature.

Then run the software.

Select Backup and it prompts you to restart.

After you rebooted.

It will do an automatic backup.

Backed up files.

Generally, a disk is placed under the system disk.

These are two methods that are commonly used.

You can try.

It's all hand-beaten.

There are some places that are not detailed.

Say hello back and forth.

Use ghost to make a gho image file,Restore or use ghost software to restore the operation,But the English operation interface is not very good-looking,So someone made a related tool software,For example, maxdos,It's a good choice,Sky software has it.,It's quite easy to make.。

1. First of all, there must be ghost software in the computer, turn on the computer, quickly press the F8 key, some computers may be ESC or F11, F12. Go to the ghost page.

2. Then select the menu local--partition--to image, and then select the Enter key.

3. The following picture shows the physical hard disk on your computer, make sure to click enter.

4. The following ** is what we call a partition disk, select C disk, and press enter to confirm.

5. The following ** shows the directory and name to be backed up, select the directory and fill in the name of the image, press Enter.

6. The corresponding translation of the prompt after that is like this, no compression, light compression, high compression, choose the option you want.

7. Start backing up the image file and wait for it to finish. The file format of the backup file is gho.

You need to use Ghost software to back up the C drive, the specific steps are as follows:

1. Run, select the menu local partition to image.

2. Select the hard disk, the first time here is the information of the first hard disk displayed.

3. After selecting, press Enter, the next operation interface will appear, select C drive.

4. After selecting, press Enter, here you need to enter the name of the backup file, and the name selected here can be arbitrary.

5. After entering, press Enter, here is a prompt to select the compression mode There are three options above: no means no compression, fast means appropriate amount of compression, and high compression.

6. After entering, press enter, and you will enter the next operation interface diagram. Ghost starts the backup according to your instructions, please do not do anything and wait until the blue progress bar is finished.

7. Wait for the backup to end and prompt you to continue, click Continue.

How to make the system on my computer as a GHO version of Windows system file?

One click ghost selects to back up after a process and he will form a gho file.

My method is to install a one-click recovery system, and then make the computer system to the state you want (if you consider that other people's computers and your computer models are different, it is recommended to back up before installing the driver), and after the backup is completed, find the location where your image file is stored and copy it. It can also be made into a system recovery disc, and the one-click recovery software I use has a hard disk version, a disc version and a USB flash drive version. Very convenient.

To make a GHO file into a boot disk, you can use Ultraiso (floppy disk), and the burning method is:

2. Put the disc in the optical drive.

3. Open UltraIso

4. Click File - Open to open the GHO file, as shown below:

5. Open the optical drive - put in the disc.

6. Click the icon pointed by the arrow in the above picture to start burning. As shown below:

About the installation and restoration of GHO computer system files:

You can make a PE system disk and install the system with one click. You can use software such as "Chinese cabbage" and "USB flash drive boot master" to create a system installation disk (the created USB flash drive can usually be used as a storage device.) Don't worry about being affected), boot from the computer through the USB flash drive into PE, and then start the system installation and restoration.

The system can be installed through the optical drive, which requires a disc containing the computer system, and at the same time, the computer needs to have an optical drive, and can start normally from the optical drive, and can be installed according to the prompts after entering the optical drive.

Back up your system with ghost.

will generate one. gho file.