-
You can change the headlight yourself, unplug the power socket of the bulb, and remove the waterproof cover behind the bulb. Then remove the bulb from the reflector. Then place the new bulb in the mirror, align it with the fixing clamp, clamp the wire springs on both sides and push it in, and finally secure the new bulb in the mirror.
Reclose the waterproof cover and plug in the bulb power. The headlight change operation has been completed.
-
Hello, car headlights are replaceable.
-
Of course, it can be replaced, whether it is a damaged headlight assembly or a headlight bulb.
-
It can be baia, related to the model:
If it is a Japanese car such as du Nissan, Fengzhitian, Honda, etc., the installation of the car DAO lamp is not very simple, and it is basically possible to change it yourself, that is, remove the halogen bulb of the original car, and then replace the LED on it. It can be disassembled and installed.
1.Open the engine compartment cover, observe the layout of the car parts on the back of the headlights, and if the space is insufficient, then go to a professional "4S" shop to replace it. Determine the headlight model of your car, and pay attention to the headlight identification model under the outer glass of the headlight.
2.Unscrew the headlight cover, noting that there are subtle differences in how to remove the headlight cover, depending on the model.
3.Forcefully unplug the lamp holder with the power cord, and pay attention to holding the lamp with your hand to avoid damage when unplugging.
4.Loosen the lampholder circlip to remove the lamp and replace it with a new bulb. The process of assembly and recovery is in reverse order of disassembly, which will not be repeated here. Be careful to reinstall the dust cap when you screw it on to avoid rain and dust infestation on the headlights.
Let's talk about the key point first, I only change the light source, that is, the bulb, whether it is LED or xenon bulb, it will not be easy to use, because the fit has no lens, the light is very scattered, and it is the same as not turning on on a rainy day.
It is best to go to a professional car shop to modify, remove the entire headlight assembly, and install lenses and xenon lamps to effectively improve.
Change the color temperature of the lamp not to be high, within 5000k.
If you want to be high, the lumens will be brighter.
-
Car headlights need to be replaced regularly. The most common car headlights now are halogen, xenon, and LED. The effective use time of different lights is different, and the brightness of the headlights will be weakened after a certain period of work, and it is recommended to check and replace them after a certain period.
Since the headlights of the car are responsible for the lighting of night driving, it can be said that the headlights are equivalent to the eyes of the car. The performance of the headlights will affect the effect of night lighting, which is directly related to driving safety. If there is indeed a lack of brightness, then it is recommended to replace the headlights, and it is recommended to replace the left and right sides at the same time, so as to avoid the situation that the brightness of the two sides is not the same.
Car headlight precautions.
The car needs to do a good job of daily maintenance, whether the oil filter needs to be replaced, whether the brakes are good, and the same headlight bulb also needs to be checked regularly to see if it is in good condition, and it also needs to be replaced in time.
Generally speaking, every 50,000 kilometers or about 2 years of the car, the brightness of the headlight bulb will be weakened, this time you need to go to the 4S store for testing, if the brightness of the car lamp is insufficient, it is best to replace the bulb in time, it is best to replace the left and right sides at the same time, in order to keep the brightness uniform.
-
Like other parts of the car, lights need to be maintained. Generally speaking, every 50,000 kilometers or about 2 years, the brightness of the headlight bulb will be significantly weakened compared with the factory, and it is best to go to the 4S store for a test at this time (perhaps it is not easy to find out such factors as driving during the day). If you find that there is indeed a lack of brightness, then it is recommended to replace the bulbs, and both bulbs on the left and right sides should be replaced, so as to avoid the situation that the brightness of the two sides is not the same.
The benefits of maintaining and replacing the lights are, firstly, to improve the brightness of the lamps to ensure driving safety, and secondly, to facilitate the annual inspection of the car. Here, it is recommended that more car owners should strengthen the maintenance of lights.
-
If the headlights of the car are not damaged, that is, they do not need to be replaced, and they can be modified if they feel that the brightness is not enough.
-
If you think that the headlight lighting effect is not good, you need to replace it, if you want to replace the headlight, it is recommended to upgrade the LED lens headlight of APA directly, the LED headlight is more energy-saving and environmentally friendly, with a longer service life and good effect.
-
Summary. Hello dear, <>
I'm glad to answer for you, the bulbs in the headlights of the car can be kept for other ones that can be sold for money. But you can only sell scrap, sell new **, you can't sell it, sell the old **, if someone buys it, you sell it to him, but if you sell scrap, someone can sell it for money, you sell your brother-in-law someone wants, you can also sell it for money, but I'm afraid that no one wants to sell scrap is okay. <>
Is the replacement headlight of the car still valuable.
Hello dear, <>
I'm glad to answer for you, the bulbs in the headlights of the car can be kept for other ones that can be sold for money. But you can only sell scrap, sell new **, you can't sell it, sell the old **, if someone buys it, you sell it to him, but if you sell the scrap, someone can sell it for money, you can sell it for money, you can sell it for money, you can also sell it for money, but I'm afraid that no one wants to sell the scrap of the virtual roll. <>
Hello dear, <>
First of all, there are five kinds of plastics in the whole composition of the old headlights, first of all, this plastic is this transparent PC polycarbon, alloy PC+ABS, PES polyether ethylene. PPT thermoplastic polyester, acrylic, mainly these plastics. If PC polycarbon is dismantled, crushed and cleaned, it can be sold for more than 7,000 yuan a ton.
PC+ABS material he can also sell two or three thousand yuan a ton, ppt, this value is higher than the jujube grinding, can be sold for about six or seven thousand yuan, the shell behind the car taillights is mostly PMI acrylic, this can also be sold for thousands of dollars a ton, according to the local **. <>
-
Replacing the headlight bulb does not necessarily need to buy the so-called original parts, as long as the bulb is sensitive to the relevant annual inspection regulations, we can choose some products produced by large factories that can improve the lighting effect of the spring beam at night. The key is to confirm what kind of plug your car bulb is, for example, the Chevrolet Cruze we used this time is an H4 socket, then you must buy a bulb with the corresponding socket. After completing the replacement of the bulb, we also need to adjust the light height by ourselves to ensure that it meets the qualification standards of the annual inspection.
Before replacing the headlight bulb, in order to avoid being burned by the components in the engine compartment when changing the bulb, we need to confirm that the vehicle has been picked up, turned off, and in a cool state, and open the hood. Gloves should be worn when changing, which can not only protect your hands, but also facilitate handling.
-
The headlights of the big car can be replaced, and the replacement requires the replacement of the requirements of the vehicle, the brightness requirements, or the police uncle will be fined if you don't go on the road.
-
Car headlights can be retrofitted, halogen bulbs can be replaced with xenon bulbs, LED headlights or bifocal lenses. Whether the car sells the headlight modification can pass the annual inspection, according to whether the lamp of the filial piety meets the requirements of the car inspection, the relevant laws and regulations stipulate that the high beam of the lamp can not be less than 1450 lumens of early picoming, and the low beam can not be less than 1050 lumens, if it does not meet the requirements it cannot pass the annual inspection.
-
Changing the headlights of a car is divided into the following nine steps:
Tools required: Changing the headlights of the car is relatively simple and does not require tools.
1. Open the front cover, find the internal position corresponding to the headlights, and loosen the waterproof rubber ring.
2. Take down the waterproof rubber ring.
3. Unplug the power of the lights.
4. At this time, you can loosen the buckle of the lamp and take the lamp out of the lampshade.
5. Prepare a new headlight.
6. Put the new lamp into the lampshade, fix it with a buckle, and plug the lamp power back to its original position.
7. Find the waterproof rubber ring you just removed.
8. Screw back to the original position as well.
9. Close the car cover and try it, the new light effect is very good.
Note: You can find someone to repair the old lights and keep them for backup.
Installation: Carried out in the state of turning off the engine and cooling the car. >>>More
There are two kinds of water ingress in car headlights, one is slight water ingress and the other is severe water ingress. >>>More
There are many reasons why car headlights do not light up, including: burned-out bulbs, heated wires, damaged relays or combination switches, open wires, short circuits, open circuits, damaged fuses and poor line contact. First of all, you should check whether the fuse is good, because the headlight suddenly does not come on, and most of the cases it is caused by the blown out of the bulb fuse. >>>More
Hello, the effect is still OK, 1. Repair scope: various types of headlights made of plexiglass, acrylic PP, PC, PE, ABS and other materials 2. Repair type: yellowing, cracking, blurring, scratches; (Note:.) >>>More
Step 1: First, find a site with a horizontal ground and vertical white walls in the underground parking lot. Facing the white wall, drive the car straight and slowly, and stop the front of the car as close to the wall as possible. >>>More