What are the precautions when cutting duck palm wood? How to improve the survival rate of cuttings?

Water cuttings are faster than soil cuttings, select semi-lignified branches, leave 2 to 3 leaves, insert them in water after rooting powder treatment, place them in a place of astigmatism and ventilation, and spray and moisturize the foliar surface when the air is dry. The temperature is about 25, and it can take root in half a month.

The time of duck palm wood cuttings avoids the high temperature period in midsummer, the low temperature period in winter, and can be used in spring and autumn, the temperature is controlled at 15-25 degrees, and the humidity is guaranteed to be 85-90%.

Method of duck palm wood cuttings:

1. Branch selection. It is best to choose more than 2 years old branches, select its robust 15-20 cm branches and cut them, but do not affect the ornamentality of the original plant, remove the bottom leaves, and retain the top 3 leaves.

2. Branch treatment. After selecting the branches, it is necessary to disinfect the knife edge of the branch, apply the prepared alcohol to the knife edge, then dry it, and soak the branch in an aqueous solution with rooting powder for 4-6 hours before cutting.

There are no soil cuttings and water cuttings.

Soilless cuttings: from the mother plant that has grown for several years, cut 6 8 cm of annual branches, or combine repotting and spring re-pruning, and the cut branches are used as cuttings material. Remove the leaves of the inserted part and put the cuttings in a plastic pot with a diameter of 15 to 20 cm on a substrate of perlite soaked in water in advance, and add a tray to the bottom of the pot to receive the exudate. 3 plants or a single plant per pot, about 1 and a half months after cuttings can take root, after cuttings should be regularly irrigated to keep moist.

After insertion, put it in a low-light place indoors, strengthen fertilizer and water management, water nutrient solution after rooting, and rehydrate 1 time a week in the pot, 100 ml of rehydration each time.

Water cuttings: duck foot wood water cuttings propagation to take a variety of bottles and other containers, filled with clean water (tap water), duck foot wood cuttings are mainly carried out in spring, cut the annual branches 8 10cm, remove the lower leaves, fix and insert into the bottle (the bottom of the cuttings leaves the bottom of the bottle 1 cm), each bottle can be inserted 2 branches 3 branches, cover with a transparent plastic bag, put in a bright place, the temperature is maintained at 15 25, after 30 days 35 days, the bottom of the cuttings grows centimeter 1 cm long white roots, at this time you can follow the above method, remove the pot.

Cuttings duck palm wood, try this "1 way" method, plug in and live one pot into multiple pots! Society, Life, Breeding, Flowers, Duck Palm Wood.

Cuttings duck palm wood has:1. Carried out on 4 September. Cut the 1-year-old top branches, 8 10 cm long, remove the lower leaves, insert them in the sand bed, keep them moist, the room temperature is about 25, and they can take root 30 to 40 days after cutting.

Sowing and propagation: 4 May using indoor pot sowing, germination temperature 20 25, keep the pot soil moist, 15 20 days after sowing germination. Seedlings are 5 cm tall and 8 cm in pots when moving 4 cm.

2. 15 20 cm pots are commonly used for potted goosefoot firewood, and broken tiles or broken bricks are padded at the bottom of the pot to facilitate drainage. During the growing period, fertilize once every half a month or use "Huiyou" 20-8-20 seasons with potassium nitrate fertilizer. In summer, it needs to be shaded with 70% shade netting, and in winter, it is not required to shade it.

When germinating long branches, attention should be paid to shaping and pruning. The young plants are thinned and mainly modeled. When the body size of the old plant is too large, re-shear adjustment is carried out.

Young plants are repotted every spring, and adult plants are repotted once every 2 years.

Does duckfoot wood grow new leaves after losing leaves? There is stagnant water in the duck foot wood pot, and the flower roots rot causing the leaves to fall. Duck foot wood likes fertilizer, ventilation, strong light, and drought tolerance.

If possible, it is ideal to leave this flower outside. If you have to put it indoors, first open the windows for ventilation and cut off branches and rotten leaves. Stop using fertilizer and ferrous sulfate, pad 2 cm between the pot and the tray, and water the pot once when the soil is dry.

It is best to use rainy days to water the flowers, which can make the flowers and leaves shiny, dark green, and take root quickly. Stop shedding leaves in a week, and soon new shoots will sprout.

Cuttings duck palm wood, try this "1 way" method, plug in and live one pot into multiple pots! Society, Life, Breeding, Flowers, Duck Palm Wood.

Take care to choose the best branches. Try to choose strong, pest-free, annual, lignified and semi-lignified branches. What is lignification?

If you look closely, the tender part is green, especially soft, and the lignified part is gray. Such branches have a higher survival rate. Second, pay attention to reasonable pruning.

Each segment is about 10 cm long, leaving two or three leaves, and the incision should be cut diagonally. Third, pay attention to choosing the right cutting substrate. The duck feet are easy to cut and have a high survival rate!

Cutting substrate is not a special choice, but in order to guarantee the quality, we can try to choose a better substrate. You can choose loose breathable nutrient soil + perlite = 3:1, coir + perlite = 3:

1 Perlite can also be selected completely!

After pouring the sand into the water to drain the water, cut the branches stained with rooting powder directly into sand. The cutting depth can be stabilized. Then move to a well-lit, airy, sun-free area.

When palm trees are cut, in fact, there is no rule on when they must be cut, and there is no taboo that some netizens say on the Internet; I'm sure that in all regions of China, cuttings can be done all year round, and there are two ways to do this. Soil cutting: Soil cutting can be done directly on the land, or it can be done using various pots, soil loading or other cultured soil.

Cut water: You can choose from a variety of bottles and cans, and put two-thirds of the water in the bottles. Before cutting, it is possible to cut some small branches from the mountain, on the ground or other potted plants, about 20 25 cm in length, prune off the leaves and small branches at the bottom of the branches about 10 15 cm, and then cut directly into soil or bottles filled with water rooting powder Preferably soaked in water for 1 2 hours.

Pay attention to temperature and humidity when cutting palms, as the climate varies greatly throughout the country throughout the year. But as long as the temperature is well controlled and there is enough moisture, palm can be cut all year round. When cutting, as long as it reaches 20 to 25 degrees, it can be cut at any time.

Due to the cold weather in our country, water cutting or potting soil can be used indoors, and the cut palms must be placed in the light transmission of the house to facilitate growth; When the weather is warm, it can be moved outdoors or transplanted into the ground. Choose two-year-old duck feet, choose strong branches, cut them with scissors, about 10-15 cm in length, with about three leaves left at the tips of the branches. If the leaves are large, we can leave one.

Put some stones in the drainage hole at the bottom of the pot, then a layer of sand, and then a fertile loose mud as a substrate for cuttings. Insert the cut branches into the mud to a depth of 3 5 cm and gently press the surrounding mud* with your hands to make the substrate fit the branches. Pour the mud* around the cut branch through water and place the pot in a cool and ventilated place with enough scattered light.

After that, you can water according to the principle of "seeing dry and wet" to avoid * soil moisture * mud dryness. After about a month, we can see that new leaves are starting to grow at the tips of the branches of the duck's feet. At this time, it means that our cutting is successful!

Because we use mud cuttings, there is no need to change the pot and transplant at this time, only need to water and maintain according to the principle of seeing dry and wet, and the duck's feet can slowly grow into small saplings.

Cuttings are a commonly used propagation method of duck palm wood, when cuttings need to pay attention to the time, it is best to be in a cloudy day, if it is a sunny day, in the morning or afternoon when the light is not so strong, before cuttings need to soak rooting water, disinfect, promote rooting and germination.

After cuttings, do not touch the branches, and leave a few leaves outside;

The cutting period should avoid the high temperature period in midsummer, and the low temperature period in winter, and the temperature is best between 15 and 25 degrees;

Cuttings are best combined with repotting, spring re-pruning, or before germination in early spring.

Newly planted plants should not be placed in the sun at the beginning, but should be placed in a cool place for about a week, and then slowly transition to a sunny place for normal growth management after acclimatization.

After the branch cuttings, be sure not to put it in a place with direct light to avoid being sunburned, it is recommended to put it in a cool and ventilated place to maintain, and wait until the branches take root, you can slowly give some light, which is conducive to growth.

1. The cutting method of duck palm wood season.

2. Duck palm wood cuttings season.

3. Duck palm wood cuttings are good in a few months.

4. When to cut the wooden duck palm.

1.Duck palm wood cuttings in spring and autumn are OK, in the cutting propagation, it is best to keep the temperature at 15-25, so in the spring in May and June the best cuttings, in the south can be carried out in April.

2.Cuttings should be avoided as much as possible from harsh summer and harsh winter, which are two extreme seasons that are not suitable for the growth of shoots.

3.When cuttings, it should be noted that the substrate should be clean enough, and there must be no eggs in it.