Can the clutch of Haier s washing machine be repaired?

Landlord!! If it's like you said, it's a malfunction. The deceleration clutch shouldn't be too much of a problem.

You mainly check the "balance ring" and 4 "booms"! Step 1: You open the lid of the washing machine, don't ask for clothes inside the machine, you shake the inner cylinder with your hands.

It's the top of the inner pass. See if there is a "water sound", if any. You tilt the machine forward, tilt it slowly, and listen to the sound of the water flowing in the direction you are leaning.

If it flows, look at the length of time. in the opposite direction. The steps are the same.

Step 2: In your washing machine "control disc sitting" on both sides and behind give a screw. You remove it, sit the control wheel up and lift it up, and you'll see.

Hang the 4 springs of the outer cylinder. You have to press them one by one with your hands to see if the force of the bounce is the same...

If the laundry is good and the spin drying is not good, it is generally a problem with the dry clutch, and there is no need to change the assembly. Remove the pulley under the spindle and pull out the clutch ratchet, you can see the spring-like thing of the clutch and the two round bars wrapped in it, check whether these things are damaged? Common spring broken hooks and round bars are worn and can be replaced.

The components are purchased at the washing machine parts store, and the cost is not much, no more than ten yuan.

I don't do after-sales now. If you do it, the unit is not allowed to do this, and if it is broken, it will be required to change the assembly. Ay... In a word.

It's dark... But if you fix it like this, you will save a lot of money. After all, it's not easy for us to make money.

Generally, there are standards for brand after-sales charges, and the corresponding ** orders will also be presented, but now there are many counterfeit after-sales people on the market, and they can't repair things well, and they charge indiscriminately.

Yes. Install the clutch to the chassis, and tighten the four fastening screws on the chassis respectively according to the diagonal position, so as to ensure that the shaft of the clutch is perpendicular to the bottom of the water cylinder and the plane of the chassis.

The torsion spring of the clutch of the washing machine falls off or breaks or the torsion spring and the dehydration shaft are too loose and slip, so that the torsion spring loses its anti-reverse function. As long as the torsion spring is reinstalled or replaced, the reducer should be replaced in serious cases. Clutch brake band is loose, worn, or broken.

Just retighten or replace the brake band.

Hehe,I'm Haier's after-sales service,Hello,First of all,The dual power clutch is not bad or not easy to judge,The sound is very loud,Coaxing,Very thick sound,Bad is even the same as the train,To sum up,You can easily judge whether the damage is,Of course,You can also be for a period of time,Maybe you have been thinking about it for a long time,If it's broken,This price is not expensive at all,It's very responsible to tell you,Single power is easy to change,Remove the screws on it,Dual power,First,Need a special large sleeve, Second, the dual-power clutch and inner cylinder are very small gaps, you haven't seen it, you can't say it, long-term use, to your age, it is difficult to remove, it is difficult to get tools such as column pullers, and even with sledgehammers, the kind of sledgehammers used on the construction site, smashed for a long time before smashing off, some of the smashed off the column have to change a small hammer, guns, cutting machines and a lot of other tools and methods, many can not be smashed down have to change the inner barrel or barrel base, there are also good smashing, very few very few, It's really hard to change this, if it's really bad, this price is really not expensive, you should thank this master, a brother above said to repair at home, hehe, I guarantee that you regret it, the single power can, the double power, forget it, there are too many theoretical experts, and the more are not worth it, I haven't done it, and no one knows how difficult it is to get the double power.

Also,No matter how bad Haier's after-sales service is, it's not like some people who attack indiscriminately,It's a pity that your washing machine is broken,I hope my answer can help you,This price is really not expensive,You can negotiate the price of repairing anything,This failure is not needed,It's really troublesome,Change the warranty for one year。

The XQS50-888 washing machine at home is not very easy to use, can not be balanced, please Haier people come to take a look, to change the clutch assembly, it takes about 450 yuan, too expensive, I personally feel that the bad is not too heavy,

Or the bottom bracket of the inner barrel of the washing machine is damaged. (Most of the time, an empty washing machine can be dehydrated.) ）

All of the above reasons may cause damage to the clutch of the washing machine, resulting in the washing machine not functioning normally. Here's how to replace the washing machine clutch.

I don't seem to be able to change it, and the regular after-sales manufacturers charge a unified fee, so I still have to find a regular after-sales service.

My washing machine is also Haier dual-power clutch bad, I bought it for eight years, called the master to repair, the first master is estimated to be unwilling to repair, called twice and dragged on for more than half a month, I always said a few days, I don't want to tell you that I don't want to come. Called the second master to see, it was determined that the clutch was broken, and it cost 380 yuan. Because I had to place an order, I came to change it three days later, and I really couldn't get it for half a day, and then the master took the whole barrel back to the store to get it.

When there was a problem with the washing machine, I asked Haier after-sales service, and I also said that the clutch was broken, and it was not the original 580 yuan? Original 680 yuan? I don't remember exactly, but I just remember that ** scared me!

You can change it yourself, it's not difficult, do you study science and engineering, if yes, you can open it, if not, just give up, I'm afraid you don't have that tool.

The replacement of the washing machine is equivalent to the overhaul of the car, and some professional tools need to be moved, as long as these tools are available at home, they can be replaced without pulling away, and there needs to be a 38mm sleeve and an additional operating rod; A set of sleeve tools (mainly used to 14mm and 10mm sleeves), with these two main tools can be replaced, friends, it is recommended that you do not let him pull away, it is common to once the washing machine is pulled away, the initiative is in their hands, in addition to the random price, a while said to change the motor, a while and said to change the computer board, as long as you do not agree to you to pay five or six hundred maintenance fees, etc., you do not pay the washing machine is his. Similar to this kind of question, you have to explain to him: is it true that the clutch is broken?

Will there still be problems with the motor or computer board? (It is common for them to make mistakes) the total cost of replacing the clutch is generally 300 380 yuan, and the cost of replacing the parts is 120 yuan, if you really want to do it yourself and then reply to me, I can teach you how to do it.

Summary. Hello dear, Haier washing machine clutch is broken, is it good to cause the washing machine to be broken, and the washing machine clutch is broken, which will cause the washing machine to not work properly. A broken clutch will cause the drum of the washing machine to turn in only one direction, which will cause the clothes to not be washed.

A broken clutch will cause noise in the washing machine, which will affect daily life. Hope mine can help you; Once again, I wish you good health and a good mood! 

Will a broken clutch of a Haier washing machine cause a broken washing machine?

Hello dear, the clutch of the washing machine is broken, and the clutch of the washing machine is broken, which will cause the washing machine to not work properly. A broken clutch will cause the drum of the washing machine to rotate in only one direction, which will cause the clothes to not be cleaned. If the device is broken, it will cause noise in the washing machine, which will affect the daily life and rest.

Hope mine can help you; Once again, I wish you good health and a good mood! 

Will a broken clutch of a Haier washing machine cause a broken washing machine?

1.A broken clutch in the washing machine will cause the washing machine to not work properly. 2.

If the core is broken, the drum of the washing machine will only rotate in one direction, which will cause the clothes to not be cleaned. 3.A broken clutch will cause noise in the washing machine, which will affect daily life.

1.During the use of the washing machine, there will be water leakage, which is generally caused by the failure of the drain glue valve. Because when the drain valve is damaged or deformed, it will cause the washing machine to leak.

Scale. Can the washing machine still work without changing the clutch?

If the washing machine is broken and the tongs are not replaced, the washing machine will be weak to wash, or the phenomenon of one-way rotation. When the washing machine is washed, there will be abnormal clicking noise, no spinning or slow spinning speed, and loud noise when the spinning and drying bureau starts early. A broken clutch in the washing machine will cause the washing machine to not work properly.

It is recommended to replace it directly. I hope it can help you with your questions.

How much does it cost to change the clutch.

The replacement cost of the clutch of Haier Wave Wheel Automatic Clothes Machine is 380 yuan. The washing machine's old dust hole combination depends on the model, different washing machine clutches are different, generally between 80 yuan and 150 yuan, and the maintenance fee is additional. Specifically, it depends on the local maintenance standards to ensure that the service is determined**, my family is Haier dual power.

Hai carries the Zhaoer dual-power clutch for a 300+, and it needs to be rented to the maintenance car sock department, because this clutch is very troublesome to disassemble However, to tell you clearly, disassembling the clutch is not something that ordinary people can disassemble.

Do you have to find Haier's after-sales service personnel?

Hello dear, yes.

If the clutch of the washing machine is broken, it is recommended not to repair it, there is no value in repair. Because the clutch will break after being repaired for a period of time, it is recommended to replace it directly.

In order to judge whether it is a fault of the deceleration clutch, in the case of the normal toggle of the ratchet wheel by the pawl, if the large pulley is rotated by hand, if it cannot be rotated, it is the fault of the planetary deceleration detector, that is, the shaft failure or the loss of teeth of the planetary gear, and the broken tooth will jam the gear.

If the large pulley can be rotated by hand, but the roller does not move, you can check whether the inner hole of the roller is polished, if the roller is normal, it may be that the spline hole connected between the planet carrier of the reducer and the roller shaft is polished.

This answer is suitable for most washing machine models of brands such as Haier EG10014B39GU1 &&& Panasonic XQG80-N80WJ.

<> washing machine clutch can be repaired. First of all, it is necessary to briefly analyze the cause of clutch failure, which is the inner barrel following the rotation during washing, the one-way rotation of the washing wave wheel, the reversal of abnormal sound or dehydration without action, and then the maintenance is carried out in combination with the situation.

Therefore, Jing Qin obstacle one: when washing the manuscript hall, the inner barrel is followed by the maintenance method.

1. Adjust the position of the connecting plate and the lever, and replace the brake belt.

2. Analyze the oil stain**, if the brake disc itself is dirty, replace the brake belt and clean the brake disc. If the shaft assembly leaks oil, it means that the riveting interface between the brake disc and the clutch shaft is cracked or damaged, and the clutch needs to be replaced.

Fault 2: one-way rotation of washing wave wheel reverse abnormal sound maintenance method:

Check whether the fork assembly is deformed when washing the initial state, and replace the fork assembly if it has been deformed; If there is no deformation, the inner bore of the ratchet is shrunk and the ratchet assembly is replaced.

Fault 3: Dehydration no action repair method.

1. Adjust the lever and connecting plate to the appropriate position.

2. Adjust the gap between the adjusting screw and the lever to be between 0.

3. Replace the ratchet spring assembly.

4. Replace the clutch.

Fault 4: Washing without action maintenance method.

1. Replace the clutch.

2. Replace the wave wheel.