Oxygen Inhalation Operation Procedure Details 5

50 nursing techniques operating procedures (17) oxygen inhalation method (nasal cannula method, nasal congestion method).

Roughly as follows:1How it works:

First of all, check whether the oxygen inhalation appliance is connected and whether there is any blockage;

whether the humidifier is connected and clean;

Placement of the mask or nasal cannula (whether the mask fits the patient's face and whether the nasal cannula is placed at the appropriate depth).

Open the oxygen cylinder valve first, and then open the flow meter valve;

regulate oxygen flow;

After the oxygen inhalation is completed, close the flow valve first, and then close the oxygen cylinder valve;

The whole operation process is smooth.

2.Precautions.

Which patients are low-flow oxygen (24-28% oxygen concentration) suitable for?

Patients with chronic obstructive pulmonary disease.

Which patients are masks suitable for?

For sane collaborators.

Which patients are suitable for high-flow oxygen (oxygen concentration greater than 60%)?

CO poisoning, patients with cardiogenic shock.

Place the straw in the patient's nostrils, which can be secured with adhesive tape.

Turn the oxygen valve on.

Here's how to use an oxygen inhaler.

1.Disinfect oxygen inhalers.

2.Close the inhaler flow control valve and connect it to the oxygen supply system to ensure that the buoy oxygen inhaler is placed vertically, and it is strictly forbidden to use it in an angle, horizontally or even upside down.

3.Unscrew the dampification bottle, add an appropriate amount of distilled water or cold boiled water to the dampification bottle, it is strictly forbidden to use normal saline, the water level can neither be higher than the upper water line, nor lower than the lower water line, and then tighten the dampification bottle.

4.Connect the nasal oxygen tube to the air outlet.

5.Open the flow control valve to adjust the flow, the float in the flow meter slowly rises, and there are bubbles coming out of the damp bottle. When the flow rate is adjusted to the desired requirement, a nasal cannula is inserted into the patient's nose and oxygen is given.

6.During the oxygen supply process, pay attention to the change of water level in the delioscopic bottle. When the water level is lower than the sewer line, close the flow control valve, unscrew the dampidization bottle, and replenish the distilled water.

7.After the patient is given oxygen, the flow control valve is closed and the oxygen inhaler is removed.

8.Disinfect the relevant parts according to the regulations.

Medical oxygen inhalation procedure 1How it works:

First of all, check whether the oxygen inhalation appliance is connected and whether there is any blockage;

whether the humidifier is connected and clean;

Placement of the mask or nasal cannula (whether the mask fits the patient's face and whether the nasal cannula is placed at the appropriate depth).

Open the oxygen cylinder valve first, and then open the flow meter valve;

regulate oxygen flow;

After the oxygen inhalation is completed, close the flow valve first, and then close the oxygen cylinder valve;

The whole operation process is smooth.

2.Precautions.

Which patients are low-flow oxygen (24-28% oxygen concentration) suitable for?

Patients with chronic obstructive pulmonary disease.

Which patients are masks suitable for?

For sane collaborators.

Which patients are suitable for high-flow oxygen (oxygen concentration greater than 60%)?

CO poisoning, patients with cardiogenic shock.

Assessment: (1) The patient's emotional state, awareness of the disease, psychological response to oxygen inhalation and degree of cooperation, etc. Implementation: (1) Operation steps: Oxygen supply: prepare the materials, check the explanation, prepare the adhesive tape and turn on the oxygen main switch.