How to convert coordinates from CAD to coordinates measured in actual measurements 20

1. Use the coordinates in CAD to open the excel sheet.

2. Cut the X coordinate to the back of the Y coordinate.

3. Select the coordinates and copy them.

4. Create a new text document. Right-click - New - Text document.

5. Open the newly created text document and paste the previously copied coordinates.

6. Select the gap between the coordinates and the copy. Click on the option to select a copy.

7. Click the Select tab, and then click the option to select a replacement.

8. In the Replace window, copy the previously copied spaces and replace them with ",". Note: This comma must be a comma for the English input status.

9. Close the Replace window, and you can see all the coordinates converted to Century Survey.

1. Make sure that the size ratio of the drawing is 1:1 If not, use the zoom key to zoom in and out of the drawing, and your drawing must be a precisely measured drawing.

2. Please unlock all the layers, select all the drawings in the drawings you need, click to move, it will prompt you to select the base point, and select a known coordinate point as the base point. 3. Enter the actual measurement coordinates of the known point: such as (3000, 2000) enter 3000, 2000 Note that the input method is in English.

If there is no effect, press the following in the higher version of CAD 0, 0 represents relative coordinates, there is a "dyn" button under the workspace, turn it off, and the input is absolute coordinates.

4. Then use the cursor to capture the points on the map and the coordinates in the actual situation.

UCS establishes a construction coordinate system Enter UCS and press the space - n press the space - 3 spaces - specify the origin and the XY axis you want, and it's OK.

Use the ucs command to define an origin, and then label the other coordinates with this as the origin.

1. First confirm the coordinate system of the drawing.

Whether it's correct or not. <>

2. In Tianzheng.

In the building disturbance, the coordinate annotation command (zbbz) is used to label whether the coordinates of the known coordinates in the diagram balance limb are correct.

3. Set UCS to Tianzheng coordinate system: enter "UCS"-Enter-Enter.

4. Draw points or PL lines according to the coordinates. Enter the y value first, followed by the x value.

5. Draw PL Now you can first do the coordinates of the point in the EXCLE table, do it in the format of "Y, X", enter the PL command in CAD, press Enter, and copy and paste the data in the excel sheet to the command bar, you can quickly draw the line segment.

Locate the sheet location where you want to annotate the coordinates and hide the other layers. Draw the axis according to the foundation plan, and click the coordinate annotation on the left side of the CAD at the intersection of the required axis lines.

1. Open the general drawing, find the location of the drawing to be labeled with coordinates, and hide other layers.

2. Hide unnecessary layers.

3. Draw the axis according to the foundation plan.

4. At the intersection of the required axes, click on the coordinate annotation on the left side of the CAD.

Here's how:1. Open the CAD software first.

2. Then type "ucs" and press enter.

3. Select the coordinate system, such as the z-axis (za) indicated by the red arrow.

4. Then prompt to specify a new origin.

5. Specify the z-axis after completion.

6. After the final designation, it will be converted to the new coordinate system.

Using the ucs command, you can manipulate the coordinate system.

For example, type ucs from the command line. Space.

The prompt command appears: [New(n) Move(m) Quadrature (g) Previous(p) Restore(r) Save(s) Delete(d) Apply(a)?World (w)].

Enter the corresponding options, such as w, space, and it will be converted to the world coordinate system;

After CAD starts, the default is the world coordinate system; You can only see the effect when you create a new coordinate system and then convert it to the world coordinate system.

Command: ucs

Current UCS Name: *World*

Specify the origin of the UCS or [face(f) name(na) object(ob) previous(p) view(v) world(w) x yz-z-axis(za)].

Then it's good to choose one of your own requirements.

1. Move the mouse on the map to make a new coordinate point.

4. After clicking on the screen, you can see that the coordinates have collapsed and moved to the new designated point.

5. In addition, you can also enter "ucs" in the command line as before, then enter "n", then enter x, y or z, and then adjust each axis according to the prompts on the screen. When you tap on the screen, you can see that the coordinates and directions have been converted.

Open Excel** with measurement coordinates and cut the X coordinate to the back of the Y coordinate. Then select the coordinates and copy them. Then create a new text document.

Right-click New Text Document. Open the newly created text document and paste in the coordinates of the previously copied friend. Then select the Copy of the Gaps between the coordinates and click on the Replace function under Options.

Demo model: Huawei MateBook X System version: Win10 APP version: Excel2019&&&CAD2007 1. Open Excel** with measurement coordinates and cut the X coordinates to the back of the Y coordinates.

2. Then copy the selected coordinates.

3. Then create a new text document. Right-click New Text Document.

4. Open the newly created text document and paste the coordinates you copied earlier.

5. Then select the space between the coordinates to copy, and then click the replacement function under the item of Mu Regret.

6. In the replacement window, copy the previously copied spaces and replace them with "Note: This comma must be a comma in the English input state.

7. Finally, close the replacement window, and you can see that all the coordinates are converted into CAD, so that the measurement can be imported into CAD.

The steps to import coordinate data from Excel into CAD and generate the corresponding points are:

First, we open the Excel software, and then open the coordinates that we want to import into the CAD.

2. Then we click the first empty cell in the x,y column, that is, cell c2, and then we enter the formula =A2& in the top FX formula bar", b2, we can modify the xy coordinates to the format we need.

3. Then we use the mouse to drag the right corner of the C2 cell down to the bottom row.

Fourth, then we use cell copying, after the copying is completed, we can check the correctness of the copying.

5. Then we select all the cells of the x,y coordinates of column C in EXCLE, and then press Ctrl+C to copy, and then we switch the page to CAD, and then paste it.

In CAD, the method of converting coordinates depends on what type of coordinates you need to convert to another. Here are some common ways to convert coordinates:

Convert Absolute Coordinates to Relative Coordinates: In CAD, relative coordinates can be used to move or copy images more conveniently. To convert absolute coordinates to relative coordinates, first select the object and then enter it"move"command or use the Ctrl + Shift + M shortcut to open the move command.

Next, specify the base point and enter it"@0,0"to convert absolute coordinates to relative coordinates.

Convert Relative Coordinates to Absolute Coordinates: If you want to convert relative coordinates to absolute coordinates, you can use them"list"command to view the object's current coordinate value. Select the object and enter it"list"After the command, the details of the object, including its current coordinate value, are displayed on the command line.

You can use these values to calculate and enter new absolute coordinate values for objects.

Coordinate System Conversion: There may be times when you need to convert an object from one coordinate system to another. In CAD, it is available"ucs"command to change the coordinate system.

Select"ucs"After the command, you can select different coordinate systems, such as polar coordinates, Cartesian coordinates, and so on. After you select a new coordinate system, you can use the same relative or absolute coordinate command to modify the position of the object.

CAD software itself cannot convert coordinates, and special coordinate conversion software is required to convert coordinates.