How to maintain and use the basketball so that the ball does not leak and can be used for a long tim

The first is to avoid water as much as possible, and then try to avoid direct sunlight. Before each pumping, it would be better to apply a little clear soap to the air nozzle. There is no such thing as a completely airtight ball. Half a year rushed down.

Keep in a dark place, not exposed to the sun or in a bag.

Method: 1. If your ball leaks soon after playing full air, it proves that your ball must be broken in the inner tank, if this is not easy to repair, so it is recommended to change one.

2. If it is slow to spread gas, it may be that there is cracking in the air eye part, or that the ball is broken somewhere, you can put the ball in the water after sprinkling gas to judge the ** air leakage, and after finding it, take super glue to paste, and be sure to apply it carefully.

3. If the valve leakage is not serious, you can use the method of edible oil to deal with it, get a little cooking oil on the gas needle to see if there is still air leakage, and replace the valve if it is serious.

How to maintain the basketball:

1. It is best to use a special air needle for inflatable tools, lubricate the air needle before use, and do not use deformed air needles or other substitutes to prevent damage to the air valve.

2. Each type of ball should be charged to its specified air pressure, 7 basketball standard air pressure, 5 football standard air pressure, under the standard air pressure, the performance of the ball is the best, otherwise it is easy to deform.

3. Don't expose to the sun. When the basketball is not in use, put it in a cool and dry place, do not put it in a sunny place such as a balcony, the exposure to the sun is easy to oxidize the basketball leather, and it is easy to burst the inner tank.

4. Basketball storage. The storage environment of the basketball is particular, and it cannot be placed in a place with high temperature and humidity. For example: a hot, airtight car box. After use, it is best not to wash the basketball with water, but to wipe it with a dry cloth.

5. Cheer up. The main technique of pumping is to moisten the needle with oil or water first, and then gently insert it into the inner tank.

Be sure to use a ball needle to pump inflat, if you only use a pump, it will cause the epidermis to separate from the inner tank. Note that the basketball should not put saliva on the end of the air needle when pumping, because the saliva has components that can digest rubber, which will corrode the air valve and lead to slow gas discharge, it is best to soak the end of the air needle in cool boiled water, and then insert the air valve to pump.

6. Pay attention to choose different material series of balls according to different venues, which can prolong the service life.

7. After use, clean the surface of the ball, do not wipe the ball with a damp cloth to prevent mold, and store it in a cool and dry place.

8. Do not sit on the ball to avoid deformation of the ball.

9. Do not touch sharp objects with the sphere, so as not to be punctured and leak.

Is this a casual question, and is it being asked with the goal of solving the problem? That's all I can say, as a basketball-related worker, it's too normal for basketball to leak air, what kind of situation are you, please take a seat:

1. Air valve leakage. This is the consequence of often violently inserting and pulling the gas needle, and sometimes some sand particles will be stuck in it, the way is to change the air nozzle, and the oil can only be used temporarily, because the oil reacts with the rubber to expand and become larger and harder, and the leakage will be more serious in the future. You can find a seller.

2. It's punctured. This general seller can't get it, but will induce you to buy a new one, but there are basketball repair shops on the Internet that you can look for, and I've repaired it pretty well.

3. The inner tank is dark and leaking. This is more common, most of them are internal strains caused by some bad habits, there is no external injury, and it is relatively easy to repair.

Which kind are you?

Hello, glad to answer for you.

1. Insert the special air nozzle tool into the middle of the air nozzle, and then slowly warp the air nozzle out.

2. Clamp the air valve with a pointed nozzle, dip it in water or cooking oil, and then slowly plug the air valve into the ball hole in a rotating way.

3. After the air valve is plugged in, use the long nose pliers to clamp the part of the air valve and gently pull it to make the air valve fit fully and tightly with the inner structure of the ball hole.

4. Fill the basketball with sufficient gas, and then use oblique nose pliers to cut off the extra part of the air valve at one time. Be sure to inflate first, otherwise it will cause the air valve to be a little protruding and more ugly.

There are generally two situations of basketball air leakage: first, there are loopholes in the connection of the pieces; The second is that the pump is damaged, and the gas is slowly discharged, both of which are "cancers", which are incurable diseases that cannot be adhered to with glue, and it is recommended to buy new ones.

If the valve of the basketball is not broken, you can change the valve without leakage, and it is more difficult to take out the valve without a special tool, you can go inside the valve barrel ball, stuff the new valve in, and cut off the excess with scissors, and you're good to go. It's the same as before.

If the ball leaks soon after hitting the ball, it means that the inner liner of the ball is broken, and it is recommended to replace it. If the air leak is slow, it is possible that the air eye is ruptured or that place is broken, then go to the car repair shop to make up for it, and the car dealer master will use super glue to make up for it, and tell him to make it up a little tighter.

If the air tank is damaged and leaking, it cannot be repaired, but can only be replaced.

Repair method of air valve leakage:

1. Preparation. 2. Pull out the air nozzle.

3. Install the air valve.

Gently clamp the new valve with needle-nose pliers, put the round head into the ball gallbladder valve room, and rotate it to press it hard.

4. Trim the air valve.

Basketball slow air leakage is generally due to valve leakage, if it is damaged in other parts, it will not leak very slowly. Valve leaks are generally made by internal compensation. Deflate the basketball to normal pressure, that is, empty but do not flatten, then use a small syringe to insert about 5 mm from the needle hole into the basketball to ensure that the hole inside the basketball is covered by a thick layer of 404; Keep the hole straight down for 1 day, then insert the air valve to flatten the basketball 2 3, press and hold the eye of the needle in the hand to inflate until it becomes round, slightly higher than the atmospheric pressure, and then deflate, repeat many times to ensure that the solvent volatilized by 404 is basically diluted; Leave it for another 1 day; Or use the quick tire repair agent from the car store, the principle is the same, that is, the fluid is injected into the inside of the tire to solidify, which is more expensive.

Agree with super glue, but it depends on what kind of basketball you are, the original leather ball used when I was a child was mended, but the effect is very poor, so it is recommended not to make up if it is gelatinous, it can be mended when it is made, but it is still easy to break if it is a synthetic leather, which is wrapped in yarn, maybe it can be mended, but I haven't tried it, but I still change the ball, and the ball is more or less affected by the quality of the ball.

Buy a new basketball. Adopt it.

Go fix the bike and make it up.

Basketball air leaks depending on what the situation is.

1. If the ball leaks soon after playing full air, it proves that the ball must be broken in the inner tank, if this is not easy to repair, so it is recommended to change one.

2. If it is slow to gase, it is okay to play the gas, and there is no gas after a few days, it may be that there is a cracking phenomenon in the air eye part, or the ball is broken somewhere, for this case, you can put the ball in the water after the gas is released, see if there are bubbles, and judge the ** air leak in turn, this method is recommended to find a car repairer, they should be very good at this. After finding it, use super glue to paste, but be sure to apply it carefully, because this is also a kind of damage to the ball, if it is not sticky well, it will reduce the service life of the ball.

If it is very small, stick it with 502 glue, which will not affect the appearance and is also very effective.

If the valve is leaking, you can use an air needle to add some ordinary glue and stamps.

If there is an air leak in other places, it will be scrapped directly.

It depends on the ** air leakage, and the air valve is basically not saved, in fact, it is better to buy a new one, and it is comfortable to fight.

Dig hard to find the loophole and apply the good glue of the brothers.