Analysis of bathtub material, classification and matching of bathtub material

Acrylic bathtub is made of artificial organic materials, which is characterized by rich shape, light weight, good surface finish, and low cost, but due to the shortcomings of artificial organic materials with poor high temperature resistance, poor pressure resistance, no wear resistance, and easy aging of the surface, the surface of the acrylic bathtub rarely does not change color after more than three years of use. However, some brand manufacturers use imported high-brightness, high-hardness acrylic sheets for bathroom in production, which overcomes some shortcomings of acrylic to a certain extent. If consumers think that the frequency of use of the bathtub is relatively low when purchasing, or the house will be renovated within a few years, then the acrylic bathtub is still more suitable for this kind of consumers due to its good cost performance.

Advantages: low cost, good thermal insulation effect, rich and diverse shapes.

Disadvantages: The surface is easy to be stained by hard objects. The cast iron bathtub is made of cast iron, and the surface is covered with enamel, so the weight is very large, and it is not easy to produce noise when used; Due to the complexity of the casting process, cast iron bathtubs are generally relatively simple in shape and very expensive.

Advantages: Durable, low water injection noise, easy to clean.

Disadvantages: too high, heavy weight, difficult to install and transport. Solid wood bathtubs are often made of hard, dense and anti-corrosive materials, such as spruce, oak, pine, cedar, etc., and the material of solid wood bathtubs on the market is most common cedar.

According to the shopping guide of a brand of solid wood bathtub in Daming Palace Building Materials Home Furnishing City, in addition to giving people a refreshing feeling, the solid wood bathtub is easy to clean, no static electricity, environmental protection and natural, etc., after bathing, it can be washed clean with clean water, and the daily maintenance is simpler.

Advantages: strong heat preservation, deep cylinder block, fully infiltrate the body.

Disadvantages: **High, need to be maintained, will be deformed and leaking. Steel bathtub is the traditional material for manufacturing bathtubs, steel plate cylinder is made of a whole thickness of about 2 mm bathtub special steel plate by stamping, the surface is made of enamel treatment, it has the characteristics of wear resistance, heat resistance, pressure resistance, etc., the weight is between the cast iron cylinder and the acrylic cylinder, the insulation effect is lower than the cast iron cylinder, but the service life is long, the overall cost performance is higher, so many consumers prefer the steel cylinder when decorating.

Pros: Cheaper, lightweight and easy to install.

Disadvantages: poor thermal insulation effect, high water injection noise, and monotonous shape.

Don't choose the expensive one, just buy the right one.

When choosing a bathtub, the first thing to consider is the brand and material, which is usually determined by the budget of the purchase; The second is the size, shape and location of the tap holes in the bathtub, which are determined by the layout and objective dimensions of the bathroom; Finally, choose the style and comfort of the bathtub according to your interests and preferences.

Choose a bathtub according to the actual situation.

After a busy day outside, you can take a comfortable hot bath at home, and the bathtub has become a must-have for people to relax. If you want to enjoy this process comfortably, choosing a good bathtub is a must.

There are three types of bathtub layouts in the bathroom: shelving, built-in, and semi-sunken.

1. The shelving type is to put the bathtub against the corner of the wall, which is convenient for construction and easy to maintain, and is suitable for use in the case that the floor and ground have been decorated.

2. The built-in bathtub is embedded in the countertop, which is conducive to placing toiletries, but it occupies a large space.

3. The semi-sunken type is to bury the 1 3 of the bathtub under the ground or into the high platform with steps, the bathtub is about 400mm on the bathroom floor or countertop, and the embedded bathtub is easy and convenient to enter and exit compared with the shelving type, which is suitable for the elderly and infirm. It is now more widely used.

4. A stylish bathroom must be matched with a bathtub of the same style and size, and it is necessary to consider not only its shape and style, but also comfort, placement, faucet type, material texture and manufacturer.

Check the depth, width, length, and girth of the tub. Some bathtubs have a special shape, with a low side design for the elderly and the disabled, with a small flange and inner wall inclination, allowing users to enter and exit freely. There are also easy-to-operate and controlled faucets, as well as perimeter handrails of different shapes and sizes, all designed to make it easy to get in and out of the tub.

Classification and matching of bathtub materials.

Walking into the mall, the bathtubs of various styles come into view, and there are various materials. The materials of the bathtub are mainly as follows:

1. Cast iron bathtubs should pay attention to the finish and flatness of the glaze, pay attention to small cracks and defects, and never buy those cast iron cylinders with orange peel on the surface. Row grinding oak.

2. The surface of the enamel steel bathtub should be visually inspected without quality defects such as deporin, cracks, scratches, and color differences, and the porcelain surface should be flat, smooth and shiny.

3. Whether the surface of the acrylic bathtub is smooth and clean, and whether it has a moisturizing feeling; whether the lower edge is straight; whether the bottom is reinforced with a whole plank; Are the fibers on the back of the bathtub clear? Is the portion weight heavy? If the back of the bathtub does not see the fibers, and the weight is heavy, it means that there are a lot of fillers with no strength added to the reinforcement layer, and this type of bathtub should be the most attention-grabbing.

Bathtub materials include cast iron bathtub, ceramic bathtub, wooden bathtub, acrylic bathtub, and steel plate bathtub. Cast iron bathtubs are generally relatively simple, expensive, with good thermal insulation performance and low noise when discharging water. Ceramic bathtubs are characterized by being bulky and brittle.

The first of the wooden bathtub is slightly higher, the thermal insulation performance is good, natural and environmentally friendly, and it needs to be maintained. Acrylic bathtubs are characterized by rich shape, light weight, low cost, good surface finish, not wear-resistant, easy to age, etc. The price of steel plate bathtub is in the middle, easy to clean, long-lasting luster, not easy to fade, and poor heat preservation.

Bathtubs are divided into ordinary bathtubs and jacuzzi bathtubs according to their functions; According to the shape, it is divided into: bathtub with skirt and bathtub without skirt; According to the material, it is divided into:

Cast iron enamel bathtubs, steel plate enamel bathtubs, FRP bathtubs, artificial agate and artificial marble bathtubs, terrazzo bathtubs, wooden bathtubs, ceramic bathtubs, etc.

With the development of economic integration, the economic and technological competitiveness of EU countries will be greatly enhanced. China exports a large number of sanitary ceramics at the same time also imports a large number of foreign high-end sanitary ceramics products, foreign famous sanitary ceramics brands have built factories in China, to seize China's high-end sanitary ceramics market.

China's sanitary ceramic products have developed greatly in terms of variety, grade and scale. With the vigorous development of the real estate industry, China's sanitary ceramics industry has also achieved rapid development, the original ceramic enterprises continue to integrate, and new sanitary ceramics enterprises continue to appear, so that the sales volume of the entire industry has gradually and steadily risen.

1. Acrylic bathtub. The material used in the bathtub is a man-made organic material, which is characterized by rich shape and light weight. Acrylic bathtubs are affordable, have a smooth surface, and have been favored by many people.

However, the acrylic bathtub has poor high temperature resistance, poor pressure resistance, is not wear-resistant, and the surface is easy to age, not dirt-resistant and not easy to clean.

2. Ceramic bathtub. As the name suggests, ceramic bathtub is a bathtub product made of ceramic, and this material bathtub is a more traditional bathtub. These bathtubs have a smooth surface and a stylish appearance, but they are bulky and fragile.

3. Cast iron bathtub. Cast iron bathtubs are made of cast iron, and the surface of this bathtub is also covered with a layer of enamel, so it is a bit more bulky than other bathtubs. Cast iron bathtubs have the advantages of good thermal insulation, easy cleaning, and low noise of water discharge, but they are bulky and high.

When buying a bathtub, you need to choose the best material. What are the materials of the bathtub? PChouse will take you to find out.

1. Acrylic bathtub This kind of bathtub is not only very affordable, but also rich in shape and smooth on the surface, so it has been favored by many owners. However, acrylic bathtubs have shortcomings such as poor high temperature resistance, poor pressure resistance, no wear resistance, and easy aging of the surface.

2. Steel bathtub: The steel bathtub is generally cheaper, and it has obvious advantages in high temperature resistance, pressure resistance and other indicators. The texture of the steel bathtub is hard, so it also has good performance in durability, and it is a cost-effective type of product.

However, the steel plate bathtub is the worst of these bathtubs in terms of heat preservation, and friends who like to soak in the bath for a long time should buy carefully.

3. Wooden bathtub: Although the wooden bathtub was produced earlier, it has only become popular in recent years. Good heat retention and environmental protection and low ** are the biggest selling points of wooden bathtubs, but compared with other types of bathtubs, the shortcomings of wooden bathtubs are easy to deform, so they need more careful daily cleaning and maintenance.

4. Cast iron bathtub: Cast iron bathtub is the most expensive product in the bathtub, with high surface finish, acid and alkali corrosion resistance, high temperature and high pressure resistance, and strong and durable, but cast iron bathtub also has a relatively single shape.

First, the disadvantage of being relatively bulky.

1. Cast iron bathtub. The so-called cast iron bathtub is a bathtub made of cast iron to outline the shape and then spray a high-temperature treated glaze. This bathtub is mainly made of cast iron, and only the surface is enamel.

The ultra-thin enamel plated on the surface of the cast iron material can protect the cast iron in all directions, play the role of anti-oxidation, anti-rust and anti-corrosion, and the cast iron and glaze material are very durable, and its life is very long, can reach 50 years!

2. Acrylic bathtub. Acrylic bathtub is made of plastic material, mainly has the surface layer, that is, the acrylic layer, and the inner layer, that is, the glass fiber resin reinforcement layer is composite, with light weight, good finish, shape can be shaped at will, etc., its disadvantage is not durable, easy to scratch and easy to age and discolor, so it is especially necessary to pay attention to daily cleaning and maintenance.

3. Wooden bathtub. Wooden bathtubs, in fact, are bathtubs made of wood, there were bath barrels in ancient China, but the bath barrels are round, and wooden bathtubs are longer in shape. When you first buy the bathtub, you need to ventilate it, because when the barrel leaves the factory, it will be coated with a layer of tung oil, and there will be a pungent and trembling smell volatilizing.

There will be water seepage at the initial test of the water, which is a normal phenomenon, after the water is full, it should be soaked for more than 12 hours, so that the barrel is fully infiltrated, and the seepage phenomenon of the wooden barrel will stop, if there is still a problem, you should contact the manufacturer in time. In the daily cleaning of the wooden bathtub, pay attention to drain the sewage completely as much as possible, so as not to absorb the sewage and accelerate the aging or mildew.

4. In addition, it should also be noted that because the wood itself will expand and contract, it is not allowed to directly bask in the sun or be blown by the cold wind, if it is not used for more than two months for a long time, the wooden barrel can be sealed with a large plastic bag after wetting to avoid the air taking away the moisture. It is best to put a little water when not in use, so that it can absorb water and keep the wood saturated and moist, but not too much water, because the bathroom itself has a certain humidity.

Classification of bathtubs.

From the perspective of material, bathtubs can be mainly divided into the following types: acrylic bathtubs, cast iron bathtubs, steel plate enamel bathtubs, pearlescent bathtubs, etc.

Acrylic bathtubs are the most commonly used type of bathtub. This kind of bathtub material is lighter, not easy to rust, the performance of maintaining water temperature is better, and the surface is smooth, easy to clean and scrub, ** is not high. However, because the hardness of the material is not strong, the surface is more likely to be scratched and scratched.

Cast iron bathtubs are very strong and durable, not easy to be damaged by friction, and at the same time have a strong resistance to acids and alkalis, and are relatively cheap. However, because it is relatively bulky, it will bring certain difficulties to transportation, and the performance of this bathtub to maintain the water temperature is not good, and the hot water will quickly become cold.

The surface of the steel plate enamel bathtub is very smooth, and it is also relatively convenient to transport. However, it is not very impact-resistant, and its heat retention is relatively poor.

The surface of the pearlescent bathtub has a pearl-like luster, which is more beautiful. At the same time, it is sturdy and durable, easy to transport, and can maintain the water temperature well.

Selection of the bathtub.

Look at the glossiness. No matter what material the bathtub is made of, as long as the gloss of its surface is higher, it indicates that it is of better quality.

Feel the smoothness. For cast iron bathtubs and steel plate enamel bathtubs, when choosing, you should touch the enamel on the surface with your hands to feel whether the feel is smooth and smooth. If the glaze plating process is done well, there will be no undulating feeling when stroked.

Test the sturdiness. It is impossible to know the sturdiness of the bathtub by visual inspection alone. Therefore, when choosing a bathtub, you must personally test whether the bathtub is sinking by pressing it with your hands or stepping on it.

If the bathtub sinks, it means that the thickness of the bathtub material is not enough, and the firmness is naturally not up to the requirements.

After-sales service. In addition to paying attention to the brand and quality of the bathtub itself, it is also necessary to consider the after-sales service, such as whether to measure and install it on the spot.

You can get it for free