How to play agarwood correctly How to play agarwood

1.Gently coil with a soft cotton cloth for a week. 2.

Leave it naturally for a week to allow the agarwood to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxidation protective layer. 3.To start the handpan, the hands must have just been washed and have dried and odorless.

Sweat-stained hands cannot be crossed. It can be plated for about 15 minutes a day, and after two weeks, a thin layer of slurry will form on the surface of the agarwood. 4.

Leave it for a while to allow the beads to dry naturally, allowing the batter to harden to a certain extent. 5.Repeat the process of 3 and 4, and the agarwood will have a very aura luster if it is well plated.

6.If the agarwood is dirty, you can wipe it with a slightly moistened cotton cloth several times, let it stand for a period of time and then dish. Xiang Supreme, it is recommended to ask.

First, use a cotton cloth to gently rub the agarwood bracelet for about a week. 2. Then leave it naturally for a week, let the beads dry naturally, and let the surface of the bracelet evenly contact with the air to form a fine and uniform oxidation protective layer (pay attention to the place where it is placed, do not be contaminated with peculiar smells). 3. To start the handpan, it must have just been washed and dried and odorless.

Sweaty hands can't go directly to the handpan!! It takes about 15 minutes a day, and after two weeks, the beads will form a thin layer of pulp. Fourth, then leave it for a period of time to let the beads dry naturally, so that the pulp can be hardened to a certain extent.

Fifth, repeat the ground to play with beads, slurry hardening. After this round trip, the beads will take on a jade-like luster. If the beads are dirty, wipe them several times with a semi-damp cotton cloth and leave them for a while before dishing.

It should be noted that in the process of playing, the hands must be clean, and it is best to wear clean and odorless cotton gloves to the plate. It is recommended to take a look at "Cracking the Mystery of Agarwood Investment Collection", incense supreme, this book is written by Sun Yuhui, the founder of the brand, and the book is very detailed!

After choosing a bracelet suitable for playing, you can start to play officially, but the method of playing is also exquisite, and it can't be as casual as ordinary play. When playing with agarwood bracelets, you must not start directly, you must first rub it with a soft and odorless cotton cloth for a week, and then leave it to dry in the shade for a week. At this time, you can play directly with the hand, but pay attention to wash your hands and dry them before each game.

You can't plate for too long a day, generally about 30 minutes. After about half a month, you can feel the viscosity resistance, which means that a thin layer of slurry has been formed on the surface of the agarwood bracelet, and then it is slowly repeated. However, it should be noted that agarwood is not suitable for the slurry plate that is too thick, and a shallow layer is the best to make the product shiny, and if it is coiled into a glass bottom, the fragrance will not be able to be discharged.

In fact, even if you don't deliberately play with the agarwood bracelet, the surface color will become darker and brighter after wearing it for a long time, which is the natural formation of the slurry during long-term wearing. It is recommended to take a look at "Cracking the Mystery of Agarwood Investment Collection", which is introduced in detail in the book.

The most common method of agarwood bracelets, that is, to play with cotton cloth or gloves for 2-3 weeks, do not get started directly, do not touch water, sweat, stolen goods, etc., so as to ensure that the surface of the bracelet is very clean before the pulp and the initial slurry, and wait until the initial slurry is directly used to play with the hand plate to accelerate the slurry, but you also need to pay attention not to touch the water and sweat.

1.First of all, for the new agarwood bracelet, we first have to use a very soft cloth or towel and rub it for a week. Then leave it naturally for a week to let it dry naturally, and at the same time we need to let it evenly contact with the air to form a uniform oxidation protective layer.

I can't just leave it there and don't care about it at all. 2.Then we have to start playing, and before we start, we must pay attention to the fact that our hands must be clean, and make sure that they are dry and do not have any other odors.

For example, friends who love to sweat should not go to the plate to play, because that may make the agarwood pollution, and it is not satisfactory after the plate comes out, so we must ensure that the hands are clean and tidy before playing. Generally, the best time to play is about 15 minutes, and then place the agarwood bracelet naturally and let it dry naturally, which needs to be in uniform contact with the air like the first step. After about two weeks, a thin layer of batter forms on the surface.

At this point, it can be said that it is on the right track. 3.Finally, wait until the bead pulp begins to harden to a certain extent.

We will repeat the previous two steps to play for a week and naturally place it for a week, so that the bracelet will appear very aura luster. If the beads are accidentally dusty, we can gently wipe them several times with a slightly damp cotton cloth and let them play in the dish for a while. I also learned about agarwood everywhere on the Internet!

Agarwood should be rubbed with a cotton cloth for 30 to 60 minutes a day and insist on 1 week, and the clean agarwood should be left for a week to dry naturally. After that, you can play for 15 30 minutes every day, insist on playing for 1 2 weeks until the surface forms a slurry, place the agarwood for a week until the slurry hardens, and finally adhere to the combination of the plate.

The new agarwood is not suitable for immediate play, you need to use a cotton cloth to rub it for 30 to 60 minutes a day, and insist on it for about 1 week, so that the dust and dirt on the surface of the agarwood can be removed, and the agarwood can also be polished and polished. Clean agarwood needs to be left to dry naturally for a week, so that the surface of the agarwood is evenly in contact with the air to form a fine and uniform oxidation protective layer. After that, you can play for about 15 30 minutes every day, and generally after insisting on playing for 1 or 2 weeks, there will be a sense of viscosity on the surface of agarwood, which is actually a manifestation of the formation of pulp.

The agarwood that forms the slurry is left for a week until the slurry hardens, and then insists on the combination of disc and place, the slurry on the surface of the agarwood will become thicker and more stable, and the color will become darker and darker.

Agarwood is not used to avoid the influence of sweat stains. Agarwood is not pulped, so there is no need to play too much. Because agarwood itself is oily, the agarwood oil contained in it will continue to volatilize and precipitate over time, so it needs to be relatively closed when stored to avoid miscellaneous odors, especially when eating (hot pot, barbecue, etc.), especially need to be vigilant, so as not to destroy the agarwood.

Daily wear of agarwood generally does not come into direct contact with **, especially oily**, in order to prevent affecting the aroma of agarwood and causing damage. Occasionally, the handpan is still OK, but you must pay attention to the cleanliness and odorlessness of your hands. If the smell of agarwood is affected by the external environment, it is best to seal it so that it can repair itself and re-emit the normal smell.

1. Rub. When playing with new agarwood, it is best to wear gloves or wrap the agarwood plate with cotton cloth for about 3 weeks, do not play directly with the hand, avoid the bracelet from touching the sweat and dirt on the hand, and ensure that the surface of the agarwood is clean and tidy.

2. Drying. Place it in a cool and ventilated position for a period of time, let the surface of the agarwood dry naturally, and at the same time a dense oxide film will be formed on the surface.

3. Play on the plate. When playing agarwood, insist on playing for no less than 3 hours a day, carefully play each part of the agarwood in place, so that the agarwood is evenly colored, insist on 1 month, let it stand for seven days, and then repeat the process of playing and placing it.

<>1. The agarwood should first be wrapped in a soft cotton cloth and rubbed for about a week, and then the agarwood should be placed naturally for a week, so that the agarwood can be dried naturally, and at the same time, the surface of the agarwood bracelet can be fully in contact with the air, and its surface can also form an oxidation protective layer.

2. After the oxide protective layer is formed on the surface of the agarwood, you can directly start playing. However, it should be noted that the hands must be clean, dry and tasteless, and if you play for about 15 minutes a day and insist on playing for two weeks, a thin slurry will be formed on the surface of the agarwood.

3. Put the agarwood to dry naturally for a period of time, let the surface slurry be further hardened, and then play with your hands for 15 minutes a day, and after two weeks, the agarwood will show a bright luster.

The agarwood bracelet should not have sweat stains, and the pulp needs to be allowed to dry naturally.

1. First of all, use a soft cotton cloth to gently rub the agarwood bracelet for a week.

2. After that, place the agarwood bracelet naturally for a week to let it dry naturally, and at the same time, let the surface of the agarwood bracelet fully and evenly contact with the air to form a fine and uniform oxidation protective layer.

3. Start the agarwood bracelet on the handpan, remember that the hands must not have sweat stains, and they must have just been washed, dry and odorless. The agarwood bracelet can be plated for about 15 minutes a day, and after about two weeks, a thin layer of pulp will form on its surface.

4. Place the agarwood bracelet for a period of time and let it dry naturally, so that its pulp can be hardened to a certain extent.

5. Repeat the third and fourth steps, if the plate is good, the agarwood bracelet will have a very aura luster, very bright.

6. If the agarwood bracelet is dirty, you can wipe it with a slightly moistened cotton cloth a few times, and then let it stand for a period of time before playing.