What are the maintenance and playing methods of agarwood

1.Although agarwood is called "agarwood incense", it is theoretically not afraid of water, but it is best to touch less water, especially Qi Nan, which cannot touch water. 2.

Avoid contact with acids and alkalis, chemicals, perfumes and detergents. 3.Agarwood is afraid of heat, so pay attention to stay away from heat sources and avoid sun exposure.

4.It is best to store agarwood in a sealed glass bottle, in a cool place, and the temperature is about 20 degrees. 5.

Agarwood and its products cannot be oiled, waxed and lacquered. 6.High-grade agarwood beads can be stored sealed with their bead powder.

7.If the agarwood is contaminated, it can be washed repeatedly with cool water, and then gently sanded with high-mesh sandpaper. Incense Supreme is the best!

First, use a soft cloth or towel and pan for a week. Second, let the beads dry naturally for a week, while the surface is evenly exposed to air to form a fine and uniform oxide protective layer. Third, start to play with the hand, at this time you must pay attention to the fact that your hands must be clean, and you must ensure that they are dry and odorless after washing.

If you love to sweat your hands, you should pay attention, and if you have sweaty hands, don't play on the plate. The best time to play is about 15 minutes, and after two weeks, the beads will form a thin layer of pulp. Fourth, let it be left for a period of time to dry naturally, so that the bead pulp begins to harden to a certain extent.

Repeat the steps of the third and fourth steps, and if the bead plate is good, it will appear with a very aura luster. If the beads are dirty, you can wipe them a few times with a slightly damp cotton cloth and let them play with the plate for a while. You can take a look at the book "Cracking the Mystery of Agarwood Investment Collection".

1.Gently coil with a soft cotton cloth for a week. 2.

Leave it naturally for a week to allow the agarwood to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxidation protective layer. 3.To start the handpan, the hands must have just been washed and have dried and odorless.

Sweat-stained hands cannot be crossed. It can be plated for about 15 minutes a day, and after two weeks, a thin layer of slurry will form on the surface of the agarwood. 4.

Leave it for a while to allow the beads to dry naturally, allowing the batter to harden to a certain extent. 5.Repeat the process of 3 and 4, and the agarwood will have a very aura luster if it is well plated.

6.If the agarwood is dirty, you can wipe it with a slightly moistened cotton cloth several times, let it stand for a period of time and then dish. Incense Supreme, familiarize yourself!

The methods of playing and maintaining the agarwood bracelet plate are as follows:

1. Maintenance method of agarwood bracelet: In order to prevent the agarwood bracelet from being corroded, the agarwood bracelet must be taken off when taking a bath and washing clothes. Agarwood bracelets are not resistant to high temperatures, nor can they be protected from exposure to the sun, and strong light will deteriorate the agarwood bracelets, so be sure to avoid exposing the agarwood bracelets to high temperatures, strong light, etc., so as not to cause the agarwood bracelets to crack.

When wearing an agarwood bracelet, it is best not to expose its cavity to high temperatures above 40; If you don't wear an agarwood bracelet, you should store it in a sealed bag and store it in a cool place.

2. The method of playing with agarwood bracelets: the new bracelets are played with cotton cloth or gloves for 2-3 weeks, do not get started directly, do not touch water, sweat, stolen goods, etc., so as to ensure that the surface of the bracelet is very clean before the slurry and the initial slurry. Don't play with the novice string, don't get started, just clean the surface, put it up, and wait for it to oxidize naturally.

Agarwood bracelet identification method:

1. Look: Observe whether the texture of each bead is clear. Natural agarwood bracelets have clear lines, and each bead has a different texture.

Natural agarwood bracelets are precious and mostly made by hand, so there is no guarantee that each bead will be the same size. The artificial agarwood bracelet is mostly machine-processed, which is more regular. There are different types of agarwood bracelets, and the colors are also different, but the darker the better.

Nowadays, many fake agarwood colors are made very deep, and it is necessary to pay attention to identification.

2. Smell: Natural agarwood bracelet is the most precious spice given by nature, it tastes natural but not pungent, and has a mellow and leisurely feeling. Depending on the origin and the reason for the incense, the fragrance is different.

Because the fake agarwood bracelet is added with artificial flavors or other chemicals, the taste is pungent, and it does not have the fresh and natural feeling of the real agarwood bracelet.

3. Touch: The surface of the genuine agarwood bracelet has a greasy and cold touch, while the fake agarwood bracelet does not have this feature. You can also use your hands to weigh its weight, the higher the oil content of the agarwood bracelet, the greater the weight, the less oil content is light, the oil content of a good agarwood bracelet is usually more than 25%, and the feel is relatively heavy.

4. Immersion: Natural agarwood bracelets generally sink water, and the agarwood bracelets that sink water are very expensive. But nowadays, many artificial agarwood bracelets will also sink, so you can't completely use this as a criterion.