What is the maintenance and playing method of agarwood?

The agarwood Buddha beads bracelet does not need to be deliberately plated, it is worn naturally, and you can see the change in the depth of the oil in a week. To play, it is recommended to use a clean white towel or bath towel.

It should be noted that the agarwood slurry layer will block the pores on the surface of the bracelet, making it difficult for the fragrance to escape, resulting in a weakened fragrance or even no fragrance at all.

Agarwood is self-evidently precious, so it is very important to maintain it:

1. Don't touch the water, don't touch the sweat, don't use too much force when playing;

2. Wipe with a dry cotton cloth after wearing and put it in a sealed bag;

3. Do not keep agarwood products close to high temperature and exposed to the sun, otherwise they will crack;

4. If the beads are dirty and difficult to clean, you can gently polish them off with sandpaper.

5. Do not mix with other incense products, because agarwood itself has a unique fragrance, so when spraying perfume and applying other skin care products, you need to be careful not to spray on the place where the Buddha beads are worn.

6. Generally, agarwood is not afraid of rain, sweat, tap water and other natural water, but remember not to put agarwood with water with washing products, such as: soap, soap, laundry detergent water, etc., especially shampoo.

Agarwood usually needs to be maintained regularly. It is recommended to take it off and wipe it with a clean cotton cloth before putting it up after wearing it, which can play a certain role in the maintenance of agarwood. If a thin slurry forms, it can be wiped with a clean, damp cotton and then trayed with a glove to allow it to regain its shine before sealing the bag for a few days.

If you really don't understand, you can go to the incense supreme to understand.

The slurry is not thick, or it can be wrapped in a warm towel after being completely wrung out for a few minutes, and then the slurry layer on the surface is wiped off with paper, this method does not harm the beads themselves, and the oil consumed is also minimal. I recommend you to read the book "Cracking the Mystery of Agarwood Investment Collection", which has a very detailed introduction to the maintenance of agarwood, and the text is easy to understand and very practical.

Agarwood bracelet will produce slurry after wearing it for a long time, and the agarwood bracelet will affect the emanation of its fragrance due to the blockage of the surface pores after the formation of the slurry, resulting in the fragrance becoming lighter or even disappearing completely. Therefore, Mr. Sun Yuhui suggested that everyone should pay attention to the maintenance of agarwood.

<>1. Maintenance: avoid contact with acid and alkali substances, chemicals, perfumes and cleaning products; Agarwood is afraid of heat, pay attention to stay away from heat sources and avoid sun exposure; Store in a sealed glass bottle in a cool place at a temperature of about 20 degrees Celsius.

2. How to play: Gently rub it with a cotton cloth for a week; Leave it naturally for a week to let the agarwood dry naturally; It can be plated for about 15 minutes a day, and after two weeks, a thin layer of slurry will form on the surface of the agarwood.

1. How to play with agarwood:

1) Gently coil with a soft cotton cloth for a week.

2) Leave it naturally for a week to let the agarwood dry naturally, and at the same time, the surface is evenly in contact with the air to form a fine and evenly beaten oxidation protective layer.

3) Start the handpan, the hands must have just been washed and have been dried and odorless. Sweat-stained hands cannot be crossed. It can be plated for about 15 minutes a day, and after two weeks, a thin layer of stimulation slurry will form on the surface of the agarwood.

4) Leave it for a period of time to allow the beads to dry naturally, so that the slurry can harden to a certain extent.

5) Repeat the process of (3) and (4), and the agarwood that is well coiled will have a very aura luster.

6) If the agarwood is dirty, you can wipe it with a slightly moistened cotton cloth several times, let it stand for a period of time and then dish.

2. Maintenance method of agarwood.

1) Although agarwood is called "agarwood incense", it is theoretically not afraid of water, but it is best to touch less water, especially Qi Nan, which cannot touch water.

2) Avoid contact with acids and alkalis, chemicals, perfumes and detergents.

3) Agarwood is afraid of heat, so pay attention to stay away from heat sources and avoid sun exposure.

4) It is best to store agarwood in a sealed glass bottle, in a cool place, and the temperature is about 20 degrees.

5) Agarwood and its products cannot be oiled, waxed and lacquered.

6) High-grade agarwood beads can be sealed and stored together with their bead powder.

7) If the agarwood is polluted, it can be washed repeatedly with cold water, and then gently polished with high-mesh silver stocking sandpaper.

1. The agarwood bracelet is not afraid of water, but it is best to touch the water less. Agarwood cannot coexist with chemicals, laundry detergents, shampoos, shower gels, etc. in daily life all contain more or less chemical ingredients, which will corrode the agarwood bracelet, make its smell lighter, and lose its original efficacy. In order to prevent the agarwood bracelet from being corroded, the agarwood bracelet must be removed when taking a bath and washing clothes.

2. The agarwood bracelet is not resistant to high temperatures, nor can it be protected from exposure to the sun, and strong light will make the agarwood bracelet deteriorate, so it must be avoided to let the agarwood bracelet come into contact with high temperature, strong light, etc., so as not to cause the agarwood bracelet to crack. When wearing an agarwood bracelet, it is best not to expose it to high temperatures above 40; If you don't wear an agarwood bracelet, you should store it in a sealed bag and store it in a cool place.

3. If you want to make the fragrance of the agarwood bracelet last, you should put it under the pillow or seal it with a sealed bag when you sleep at night, and it will be very strong and fragrant when you take it out in the morning. Agarwood bracelets will emit more fragrance through the body temperature, so it should be worn on the body often, and the body temperature will fully release its fragrance after wearing, and this experience can only be experienced by those who wear it.

4. The most important point in the maintenance of agarwood bracelets is to avoid causing the most direct damage to them, such as avoiding collisions between agarwood bracelets and some hard objects, preventing agarwood bracelets from falling directly to the ground, and trying to avoid agarwood bracelets being artificially scratched, etc., which will seriously affect the beauty of agarwood bracelets.

5. According to Buddhism and metaphysical theory, the agarwood bracelet has a certain spirituality, and it has the miraculous effect of driving away evil and eliminating evil, so people who wear agarwood bracelets must pay attention to maintaining personal hygiene, and do not put them around when they do not wear agarwood bracelets, and it is best to use a special jewelry box to pack the agarwood bracelets.

6. Disc play: The most common method is to play with cotton cloth or gloves for 2-3 weeks with the new hand bracelet, do not get started directly, do not touch water, sweat, stolen goods, etc., so as to ensure that the bracelet is very clean before the pulp and the initial pulp, and wait until the initial pulp is directly used to play with the hand plate to accelerate the pulp, but you also need to pay attention not to touch the water and sweat.