-
The keyless entry system provides full convenience while ensuring safety. The remote control key of the models on the market in recent years also has an encryption mechanism in the form of a key, which greatly improves the security compared with before. In the next part, we will introduce the start-up part of the smart key system, and understand that different keys can be carried on the body (the card key can also be placed in the wallet, but be careful not to squeeze) can enter the car and drive ,..the car away
If I put my key on my body, I walked into the car, about 1 meter, pressed the micro button on the handlebar, unlocked the four doors, and after entering the car, I pressed the start button, at this time the button light was orange, and the radio panel was energized.
Press it again, the engine light is energized, at this time the foot brake or clutch, the button light will turn green, then press the start button, the car starts! In fact, as soon as you enter the cab, directly press the brake or clutch, the start button will turn green, and you will start the car as soon as you press it! The above is a bit cumbersome, but I just want to introduce it to you in detail, in fact, some friends also know that other keyless start systems are almost all.
It's a routine, but some cars have that kind of analog start, and there is no key, but there is something like a key in the starting place, and you have to button it!
Let's talk about something that you may not know very well, and you can use it in case of emergency in the future!
What if the key is not detected? Or what if the battery is dead? The reason for not detecting the key may be electromagnetic interference, or the key is too far away from the start button and other reasons, the solution can be any level of the battery.
If it doesn't work, you can take an emergency start by entering the car, pressing the brake and clutch with both feet at the same time, and quickly putting any key directly on the start button!
Note that the closer the better, and it's best to make contact with the start button! Press when the green light appears! You can start the car. The key battery is dead, and this method is just as good! If the key battery is dead.
It will also be prompted on the dashboard! Please forgive me for the bad things mentioned above! I have time to share other experiences with you... I'm typing slowly, but hard time with the start and safety of the car model, as well as the smart key system extra features and common issues.
-
Ordinary keys can't start the car G3 can only start keyless It's good to adapt to it In fact, the anti-theft performance is the same.
-
The smart key is better than the ordinary one, but you can only keep the battery a little.
-
There are two possibilities, 1. The key signal is weak, or the key is close to the magnetic field, you can put the key close to the start button to start. 2. The starting conditions are not enough, such as you hang up to the blind group to answer the n gear or try to move, press the brake pedal a few more times, and so on. 3.
Again, there is no signal tower, a factory with a relatively large magnetic field, etc. Finally, you can disconnect the negative pole of the battery cord and wait for three to five minutes before starting it.
-
BYD G3, can not detect the key, press the button on the door to lock the car and do not respond, such a situation occurs, it means that BYD G3 electronic anti-theft system is faulty, you need to re-match BYD G3 electronic anti-theft system, you can eliminate this problem, match BYD G3 electronic anti-theft system The specific operation steps are as follows:
1. Open the door of the BYD G3 driver.
2. Press the brake pedal of BYD G3 to prepare to start the engine.
3. Press the one-button start button of BYD G3.
Fourth, the instrument lights of BYD G3 are all lit up, which proves that the engine is started.
5. Press and hold the lock button of the BYD G3 driver's door without releasing it for more than 10 seconds to complete the matching.
-
The car remote control key light flashes but the car locks does not respond, which is mainly caused by the following reasons:
If the battery of the key fob does not dissipate, the key light will flash, but the door will not lock. Low power and low voltage will lead to unstable circuit performance and shorten the wireless communication distance. In this case, you can lock the car close to the body. When necessary, just let the grip replace the battery.
There are two types of radio frequency forms of remote control key punching rubber in the form of short-range infrared remote sensing and short-range wireless radio frequency. Regardless of the form of these two, its transmitting and receiving circuits are prone to failure. This is because they are determined by three factors: circuit design, component level, and usage conditions.
The form of short-range infrared remote sensing and the form of short-range radio frequency are very sensitive to high-power radiation interference, so it is best to stay away from high-power equipment and other communication equipment when using the remote control key to prevent the impact of strong magnetic field on communication.
Hope mine can help you. Hope!
-
There should be a keyed emergency start slot! Didn't you? There should be! If you can't find it, call the 4S shop** to ask!
-
Release the handbrake and push it to the 4S shop for repair.
Or find a trailer.
-
Summary. Hello, the car can not start this situation, is divided into two aspects, the first aspect is that the vehicle starts without any response, then this situation.
1: First of all, you need to check whether it is caused by the loss of battery power? If the battery is out of power, you need to charge the battery or replace it with a new one.
2: In the case of making sure that the battery does not lose power, focus on checking whether the vehicle starter is a problem or whether the anti-theft is locked, 3: If there is a problem with the starter, you need to check the corresponding control circuit of the starter or replace the starter.
4: If there is a problem with the anti-theft system, you need to re-do the anti-theft matching.
The second major aspect is that the vehicle engine can rotate, but does not catch fire, then this situation focuses on checking, 1: whether the gasoline pump oil pressure is insufficient or the vehicle engine is not ignition, 2: if the pump oil pressure is insufficient, this situation needs to replace the gasoline pump.
Check the fuse or wiring of the gasoline pump.
3: If it is not ignited, focus on checking the crankshaft position, sensor and ignition coil.
BYD F3 key can not start the car what reason.
Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.
Hello, the car can not start this situation, is divided into two aspects, the first is that the vehicle starts without any response, then this situation 1: first of all, you need to check whether the battery power loss caused by this phenomenon? If the battery is out of power, you need to charge the battery or replace it with a new one.
2: In the case of making sure that the battery does not lose power, focus on checking whether the vehicle starter is a problem or whether the anti-theft is locked, 3: If there is a problem with the starter, you need to check the corresponding control circuit of the starter or replace the starter.
4: If there is a problem with the anti-theft system, you need to re-do the anti-theft matching. The second major aspect is that the vehicle engine can turn, but it does not catch fire, so this situation is to focus on checking, 1:
Is it that the fuel pressure of the gasoline pump is insufficient or the engine of the vehicle is not ignition, 2: If the pump oil pressure is insufficient, the gasoline pump needs to be replaced in this case. Check the fuse or wiring of the gasoline pump.
3: If it is not ignited, focus on checking the crankshaft position, sensor and ignition coil. The above two aspects are the relevant reasons for the vehicle to not start, as well as the solutions, it is recommended to make a relevant reference!
-
It is estimated that your vehicle is not completely powered off, first of all, you look at your start button to see if the small light on it is on. If it is bright then you will definitely not be able to lock the car, and if you move the car to a place, it will interfere with the signal near the high magnetic field and high voltage. Both methods have been tried in the 4S store.
If the keys don't match, you can't get on the car at all, as long as you can get on the car, it's not a key mismatch. It could be that the body immobilizer is faulty.
-
BYD G3 ( Check price |Detailed explanation of the model ) Reasons why the smart key cannot be sensed: 1. The power of the key is insufficient, such as not replacing the battery key for a long time; 2. There is a problem with the key itself, such as the control unit of the key, which is broken; 3. There is signal interference near the parking of the car.
BYD G3 can't detect the key, the first thing that should come to mind is that the key is out of power, at this time you can press any key of the key to see if there is an indicator light on, if not, it is out of power, and the battery needs to be replaced.
Reasons why the car doesn't detect the keys:
1. There may be cluster signal interference around the location. If there is interference, try to find a place where you can receive the signal, and look everywhere for a suitable place. Some of the core Zheng car recorders will also interfere if they are not properly shielded, resulting in the inability to detect the key.
3. It may be that the car key battery is in poor contact. You can buckle the key case down and rotate the lower button battery; Or snap the coin cell battery down and install it back in after a while.
4. It may be that the smart box induction is broken. Although this problem does not happen often, it cannot be ruled out that if it is really the smart box induction is broken, you can go to the place where you bought the car to complain and ask them to match a new one.
Photo by Q&A) @2019
This is mostly due to excessive carbon deposits, which makes the piston ring seal poorly and the oil channeling. When this kind of phenomenon occurs, carbon deposition should be eliminated in time, and the piston ring should be restored as soon as possible with the use of Mafu multi-way plates, and the phenomenon of burning engine oil will be eliminated as the piston ring tightness is restored. However, too much carbon deposition and too long time make the piston ring deformed excessively, and after the carbon deposit is eliminated, the piston ring may not be able to recover its elasticity, so the only way to replace the piston ring is to replace it. >>>More
Taidao Roundabout Slash + Prop Flow.
On August 11th, I picked up the car Prestige and bought it back for three days, the problems are as follows; >>>More
It's really good, a good article that lights up.
If your phone is not working properly, please check the following: >>>More