How to use the hot melt laminating machine, the operation process of the hot melt adhesive laminatin

It is recommended that you read the instructions carefully.

Regarding the questions you raised, we have the following answers: hot melt adhesive laminating machine operation process: cloth inspection, the material or fabric before the composite processing to detect whether there is damage and other problems; After the cloth inspection is no problem, it will be sent to the laminating equipment for hot melt adhesive film lamination processing; After the hot melt adhesive film is laminated, it must be tested again to confirm whether there are defective products!

Quality inspection is controlled layer by layer, and packaging will be carried out if there is no quality problem. The packaging adopts two-layer packaging, the mileage is packed in a transparent plastic bag, and the outer layer is packed in a snakeskin bag; Delivery, timely delivery to the customer. It can be divided into two situations, one is the use of non-mass production:

For example, it is used in a small area, and it is used in small-scale but processing stores (such as stores that operate curtains); The second situation is that industrial production needs to be processed in batches. For the use of hot-melt adhesive film in the case of non-mass production, first of all, the hot-melt adhesive film or hot-melt mesh film they use is mainly a conventional model, and there are generally no special requirements. In this large demand scenario, the tools used in the compound are mainly ironing machines, heat presses and irons, and the melting point of the hot melt adhesive used is not too high.

When bonding, adjust the composite tool to the corresponding temperature and iron vigorously for 10-20 seconds to complete the composite bonding. The overall operation is not difficult, if there is degumming, bonding is not firm, it may be that the selected hot melt adhesive specifications are deviated, or the ironing temperature is not enough, after analyzing the specific reason, and then make targeted adjustments. For industrial production that requires batch processing, changes need to be made to the compounding equipment.

Due to the requirements of production capacity, it is necessary to choose to use a professional thermal laminating machine. At present, there are still many types of thermal composite laminating machines, whether it is hot melt adhesive film or hot melt mesh film, the applicability of composite machines is still relatively strong, so for factories that already have thermal composite laminating machines, even if the type of hot melt adhesive film is replaced, there is basically no need to purchase corresponding composite equipment. I hope my answer is helpful to you and I wish you a happy life!

Summary. Hello,,, under normal circumstances, there is a temperature control inside the PUR hot melt adhesive laminating machine, after the temperature of the new equipment is added to the set temperature, turn on the motor switch, adjust the internal temperature control knob, hear a "pop" sound The motor can be started, and there is generally no need to adjust this knob after normal use.

2. Foreign objects are easy to get stuck at the rubber roller and scraper, and they must be removed in time, otherwise the roller will be stuck.

3. If the range of adjustment of the rubber roller speed controller cannot meet the production requirements, the sprocket gear can be replaced.

4. We would like to remind our customers that the addition of rubber particles should not be too much each time, and it should not exceed the connecting lines of the wall plates at both ends of the rubber tank.

Precautions for operation of PUR hot melt adhesive laminating machine:

1. The operator of the PUR hot melt adhesive laminating machine must not keep long hair, and if there is long hair, it must be coiled.

2. The user should not touch the rubber roller and rubber tank with any part of the body to avoid burns.

3. The power consumption is very large in the process of starting and heating, and it is necessary to pay attention to the fire caused by overload heating.

4. It is necessary to oil regularly, use butter for the transmission chain, use lubricating oil for the rubber roller bearing, and clean up the foreign matter between the scraper and the rubber roller.

Hot melt adhesive film lamination machine operation.

Hello,,, under normal circumstances, there is a temperature control inside the PUR hot melt adhesive laminating machine, after the temperature of the new equipment is added to the set temperature, turn on the switch of the motor and adjust the internal temperature control knob, hear a "pop" sound The motor can be started, and the knob is generally not required to adjust after normal use.

2. Foreign objects are easy to get stuck at the rubber roller and scraper, and they must be removed in time, otherwise the roller will be stuck.

3. If the range of adjustment of the rubber roller speed controller cannot meet the production requirements, the sprocket gear can be replaced.

4. We would like to remind our customers that the addition of rubber particles should not be too much each time, and it should not exceed the connecting lines of the wall plates at both ends of the rubber tank.

Precautions for operation of PUR hot melt adhesive laminating machine:

1. The operator of the PUR hot melt adhesive laminating machine must not keep long hair, and if there is long hair, it must be coiled.

2. The user should not touch the rubber roller and rubber tank with any part of the body to avoid burns.

3. The power consumption is very large in the process of starting and heating, and it is necessary to pay attention to the fire caused by overload heating.

4. It is necessary to oil regularly, use butter for the transmission chain, use lubricating oil for the rubber roller bearing, and clean up the foreign matter between the scraper and the rubber roller.

Dear, shout envy! I'm glad Zheng Sheng took a picture of your question! Cloth hot melt laminating machine tutorial:

How to use the hot melt machine:1Take out the hot melt machine and select the right die head.

2.After plugging in the power outlet, press the on/off button on the controller and adjust the temperature according to the situation. 3.

Wait a few minutes for heating after the temperature is set successfully. 4.Insert the key that needs to be melted into the corresponding die, and pay attention to the outer cylinder that needs to be reduced and the inner cylinder that needs to be enlarged.

5.Observe the scaling of the hot melt pipe, generally when the solder paste comes out, quickly pull out and dock the two ends, and it is completed. During use, be careful to avoid burns.

Regarding the use of hot melt machine, Su Yi teaches you how to do it!

The hot melt connection should be carried out according to the following steps:

Turn on the hot melt to the power supply, and the operation can only start after the operating temperature indicator is on;

To cut the pipe village, it is necessary to make the end face table lie on the pipe axis.

Pipe cutting generally uses pipe shears or pipe cutting machines.

If necessary, a sharp hacksaw can be used, but the pipe section should be deburred and burrs after cutting;

The end face of the pipe village and the pipe fitting must be clean, dry and oil-free;

Measure and plot the melt depth at the end of the tube with a caliper and a suitable pen.

When the pipeline is connected by electric fusion, the following provisions shall be met:

a.The fusion part of the electrofusion pipe fittings and the pipe should be kept free from moisture;

b.The connecting end of the electrofusion socket connecting pipe should be cut vertically, and the dirt on the connecting surface of the pipe and pipe fittings should be wiped with a clean cotton cloth, and the depth of the insertion should be marked to scrape off its epidermis;

c.straighten the two corresponding connectors so that they are on the same axis;

d.The wire communication between the electrofusion connecting machine and the electrofusion pipe fittings should be correct. Before connection, the voltage of electric heating should be checked, and the heating time should comply with the relevant regulations of the manufacturer of electric fusion connecting equipment and electric fusion pipe fittings;

e.During the fusion and cooling process, the electric fusion pipe fittings and fused pipes shall not be moved, rotated, and no pressure shall be applied to the connectors;

f.The standard heating time for electrofusion connections should be provided by the manufacturer and should be adjusted according to the ambient temperature.

The operation of the hot melt welding machine is more complicated, and the attachment** introduction makes it easy for you to learn to operate.

The hot melt machine is a kind of electrical products, do you know nothing about the hot melt machine? Today, I will take you to see how to use the hot melt machine, and introduce several hot melt machine products** for your reference.

The hot melt machine uses the square block method.

The hot melt machine is divided into super wave hot melt machine, small hot melt machine, multi-function hot melt machine and other hot melt machine products.

1. Install the heating end of the fixed fusion splider, place the welding splicer on the rack, install the corresponding heating die according to the required pipe specifications, and tighten it with the hexagon angle, which is generally small at the front end.

2. Power on.

Turn on the power supply (note that the power supply must be with a grounding protection wire), the green indicator light is on, and the red indicator light is off, indicating that the fusion splicer has entered the automatic control state and can start operation. Note: In the automatic temperature control state, the red and green lights will turn on by themselves alternately, which means that the welder is under control and does not affect the operation.

3. Welded pipe materials.

Cut off the pipe vertically with the pipe cutter, push the pipe and pipe fittings into the welder die without rotation at the same time, and operate according to the requirements of the following table, immediately remove the pipe and pipe fittings from the die after the heating time is reached, and insert them into the required depth in a straight line quickly and without rotation, so that the joint forms a uniform flange.

Hot Melt Machine**.

Flanns hot melt machine element.

Wit power hot melt machine 270 yuan.

Feilu hot melt machine 310 yuan.

After reading the introduction of the use of the hot melt machine, I believe that we have more understanding of this product category, how to buy hot melt machine products, but also need to be determined according to the actual situation.