Huawei Mate30 how to cast the screen to the computer

The method is as follows: 1. The mobile phone screen projection function supports two modes: computer mode.

In mobile phone mode, the large screen is a PC interface in computer mode, and the mobile phone is a mobile phone interface, and the two are displayed and operated independently, and the large screen and mobile phone display the same content in mobile phone mode.

2. Through the Type-C adapter.

Connect your phone to the big screen, use the default mode for the first time and pop up the touchpad, swipe down from the top of the screen to open the notification bar, click to switch the computer mode to mobile mode, and the analog keyboard and mouse disappear; When the mobile screen projection is in Mobile mode, swipe down from the top of the screen to open the notification bar, click to switch the mobile mode to computer mode, and the simulated keyboard and mouse option pops up.

Yes. Buy a docking station.

matedock2,Or other docking stations on the market,You can cast the screen of the mobile phone to the TV,The HUAWEI CLOUD computer app running on the mobile phone will naturally also be projected to the TV。

When the mobile phone is projected in [computer mode], how to start the simulated keyboard and mouse to operate.

Solution: When the [Computer Mode] is enabled for screen projection on the mobile phone, if there is no physical keyboard and mouse connected, the mobile phone screen will automatically pop up the simulated keyboard and mouse touchpad; If you have a physical keyboard and mouse, the simulated keyboard and mouse touchpad will not actively pop up.

If there is no physical keyboard and mouse, and the main interface of the mobile phone does not pop up the simulated keyboard and mouse touchpad, you can pull down from the top of the mobile phone screen and click "Mobile Screen Projection Touchpad" in the drop-down interface to start.

2. Next, turn on AirDroid Cast on your phone. Once you're in, click on "Screen Projection" at the bottom of the page. After entering the projection page, click the "Scan" button in the middle to scan the computer *** for screen projection.

3. After the connection is successful, you can start projection.

4. AirDroid Cast can also realize computer screen projection to Huawei mobile phone, only need to click on the mobile phone to receive the screen, and the computer can click to cast the screen on the mobile phone to enter the screen projection code on the mobile phone, and the computer can successfully project the screen to the Huawei mobile phone.

How to cast the screen of the phone to the computer. mp4

Hello dear, the reason why I bought the Huawei Mate30 projection screen can't find the device is that it is not connected to the same WiFi. mate30The reasons why the wireless projection TV is not displayed are as follows:1、Some configurations in the mobile phone are wrong,Just reconfigure it,Or the mobile phone is not kept in the same LAN as the TV; Confirm whether the mobile phone and TV are linked to the same wifi,If the mobile phone uses4G,The TV uses wifi,Naturally, there is no response for half a day。

2. Even if it is connected to the same wifi, there are some software that are closed due to copyright and other considerations, and the projection function is closed, you can try the corresponding third-party projection software on the mobile phone, and then try to cast the screen. 3、If it's the first time to cast the screen,Find that the screen can't be projected,It may be that the TV is not equipped with the corresponding DLNAorAirPlay function,This is also a stateless method to achieve screen projection。

This method does not require any software, but the mobile phone to project the screen to the computer must first ensure that the computer is win10 system, and the computer and the mobile phone must be in the same network environment! (i.e. connected to the same wifi).

Step 1: Click to open the small bubble box in the lower right corner of the computer, you can see that there are various computer settings, click [Connect].

Step 2: Then select [Project to this computer], then jump to the settings page, change the option in the picture to "All locations are available", so that other devices can discover your computer.

Step 3: Then find the projection function in your mobile phone, some of them are called [projection screen], which generally appears in the connection mode, here take Huawei mobile phone as an example, slide down the control center, and find [multi-screen interaction] is the projection function.

Step 4: Then you will recognize your computer, so you can connect by clicking [Connect] on the computer.

After the connection is successful, the default is this interface,There is office software that can be used in it,If you want more advanced functions, you can use the Huawei mobile phone after the connection is successful, it will become a trackpad by default,And the mouse to use。

With a trackpad, you can drag the mouse arrows, tap the underline to mark it as a highlighter circle, and the microphone can turn pages with your voice.

How to cast the screen of Huawei mobile phones to computers.

How to cast the screen of Huawei mobile phones?

Mobile phones and laptops can be connected in the following four ways:

1. Touch.

1. Turn on the NFC function on the phone and touch the HUAWEI Share tag (or Magic-Link tag) on the back of the phone (near the rear lens) to the HUAWEI SHARE tag (or Magic-Link tag) on the laptop (notebooks without NFC tags can be picked up for free at an officially authorized Huawei store).

2. Some notebook NFC has an antenna built into the touchpad, and there is no NFC tag on the computer, so the connection can be triggered by touching the mobile phone to the notebook trackpad.

3. When the connection between the mobile phone and the laptop is established for the first time, the mobile phone has a user privacy statement, and you need to agree to the user license agreement; If you are not connected for the first time, you only need to confirm it on the PC.

2. Sweep it.

Open PC Manager >> My Phone >> Connect Now, select Scan Code Connect or tap the upper left corner to switch to the Scan Code Connect page, open HUAWEI Browser or Smart Vision on your phone, and scan *** to connect; After successfully scanning the code, click "Connect" on the mobile phone and "Allow" on the notebook according to the prompts.

3. Proximity to the connection.

Turn on WLAN and Bluetooth on the mobile phone, and at the same time open the Computer Manager "My Phone" on the computer to connect immediately, and then directly close to the keyboard and follow the mobile phone prompts to connect successfully.

Fourth, wired connection.

1. This method is only supported in versions and above.

2. The PC Manager version needs to be updated to and above;

3. If you use a docking station adapter to connect the data cable and the PC, make sure that the computer connection port is not only the charging port, otherwise it will not be supported.

Connect the Huawei phone and Huawei PC with a wired connection or data cable, and the phone will be unlocked and the screen is on, and the connection will be successful by following the prompts on the phone.

If you want to project the screen to a certain device, at least these devices need to be in the same wifi network environment, and then pull down the notification bar and click "Multi-screen interaction";

However, before connecting, you also need to make the following settings on the computer, click on the start menu, and then find the settings option, and turn on Bluetooth after entering the settings page, see the figure below.

In addition, if it is a win10 system, we may turn off the message notification in the lower right corner, so be sure to click on the notification after clicking on the connection, and see if it will pop up the request to connect notification message as shown in the figure below;

If there is, just click "Yes", so that the phone and the computer will start to establish a connection, and then we will see the screen of the phone on the computer screen at this time.

How to cast the screen of Huawei mobile phone to computer? This method is so convenient!

Why don't you give it a hammer to try?

<> turn on Wi-Fi on your mobile phone, swipe down from the top right side of the screen to enter the control center and turn on "Wireless Mirroring" (or go to "Settings> "More Connections" > "Mobile Mirroring" to turn on "Wireless Mirroring"), and search for large-screen devices.

Note] You can then choose between a wired connection or a wireless connection. This is only the wireless connection method.

Wireless Connection] Connect to large-screen devices such as TVs.

Step 1] Confirm the TV's wireless display and screen mirroring on the large screen.

The multi-screen interaction or screen mirroring function is turned on (the name of the function is different for different brands of TVs).

Step 2] Turn on Wi-Fi on your phone, swipe down from the top right side of the screen to enter the control center and turn on "Wireless Mirroring" (or go to "Settings> "More Connections" > "Mobile Mirroring" to turn on "Wireless Ribbon Mirroring"), and search for large-screen devices.

Step 3] Select the corresponding large-screen device name in the device list to complete the screen projection.

Icon Description] DV device: support to mirror the mobile phone on the large screen, switch audio and camera between the unit and the large screen, and also support computer mode.

Cast to the big screen. cast+ device: support to mirror the mobile phone on the large screen, and also support to cast to the large screen in computer mode.

Miracast device: Support to mirror the mobile phone on the large screen, and also support the stupid bridge to project to the large screen in computer mode.

Connect a computer device such as a matebook].

Step 1] Turn on Bluetooth and Wi-Fi on your phone and computer, and make sure that the computer manager on your computer.

Running. Step 2].

You can connect your phone to the computer by touching, searching, scanning, etc.

Touch it. Touch the back of your phone to the NFC tag on your computer.

Search for it. Open PC Manager, click "Connect Now" > "Close to Connect" The phone is close to the computer and turn on Bluetooth, and follow the prompts when you find the computer.

Sweep it. Step 3].

Tap "Connect" on your phone and follow the prompts to complete the device connection.

Step 4] Click "Allow" on your computer to complete the operation.

Open the mobile phone settings directly, Kaiyou and then search for projection, you can search for this Jingsen function. Click to cast the screen,As long as it is staring at the TV under the same wifi,You can directly choose to project the screen to the TV。

Take Huawei Mate30Pro,EMUI10 system as an example,The way to project the TV is as follows:

1. Wireless projection.

First of all, make sure that the Huawei Mate30Pro mobile phone and TV are in the same network environment,Open the Huawei Mate30Pro mobile phone,Find the desktop"Settings"And click to enter,Swipe down to find"More connections"Click to enter,Then click"Mobile phone projection",Then"Wireless projection",Search for the name of the TV,After the connection is successful, you can achieve wireless projection。

2. Wired projection.

Huawei mate30pro mobile phone wired screen projection is to connect the mobile phone with the TV through a cable,The most commonly used is the HDMI cable,The mobile phone needs an interface to HDMIThe adapter device。 HUAWEI MATE30PRO mobile phone is a Type-C interface,You need a Type-C to HDMI conversion device,You can also realize screen projection after successful connection。

3. Third-party projection software.

First of all, on the TV and Huaweimate30ProInstall the "Swift Screen Recorder" software,Then use the Huawei Mate30Pro mobile phone"Swift Screen Recorder"Sweep the TV"Swift Screen Recorder"Software***,After they are successfully connected,In this way, you can smoothly**Projection the screen to the TV。 However, it should be noted that they must be connected in the same network environment, so that the picture stability of screen projection is relatively high.

Demo Model Information:Brand model: iPhone12, Huawei Mate30.

System Version:

If the mobile phone and TV are not connected to the same local area network, they can be connected to the same wifi; The content is protected by copyright and is limited to the software client; System bug, restart your phone and TVReset network settingsAfter that, try to cast the screen of the old core.

This answer is applicable to Huawei, Apple, Xiaomi and other brands of mobile phones, Xiaomi, Changhong, Samsung, Huawei, Skyworth and other brands of smart TV models, as well as Youku, iQiyi.

1、Screen projection requires the mobile phone and TV to be in the same LAN,If the mobile phone uses mobile data,TV is connectedwifi,Screen projection cannot be realized。

System running bugs, the user can restart the device and restore the network settings before attempting to cast the screen.

Sometimes unstable networks can also lead to screen casting failuresUsers can check the network status.