Kitchen flue tile cracks who knows what to do

Causes of tile cracking.

1: When the occupancy rate is high, the flue is used frequently, which is caused by thermal expansion and cold contraction.

2: If it is cracked at the 45-degree chamfer, it means that you are pasting an ordinary porcelain piece and it is caused by squeezing.

3: If it is a crack at the chamfer of the sunny corner, it can be proved that it is a processed vitrified brick.

4. If it is a crack in the middle of the brick, it is likely that the flue structure changes.

Workaround: If it is the first.

Second, three situations: to the shear folding board shop fold a small right-angle side with glass glue paste, if it is the fourth case, you have to dismantle, deal with the base layer after the re-sticking brick, in order to avoid similar problems, re-paste is directly with R corner edge to close the mouth better.

Hope it helps.

1. Wall deformation.

Tile cracking caused by deformation of the wall can show regular cracks in the horizontal, vertical or diagonal directions. Precautionary measures: Before laying bricks on the light wall, ask the construction personnel to test the wall to see if the wall is installed firmly.

Secondly, it is recommended to make a layer of steel wire mesh on the side of the wall tiles to improve the strength and load-bearing capacity of the wall. For the insulation wall, the insulation layer is usually made of polystyrene board material, and the original insulation wall can be removed and replaced by bricks (commonly known as foam bricks). Due to the strong adhesion of the bricks, it can effectively reduce the cracking and falling off of the tiles, but the insulation effect will be slightly worse.

It is also possible to hang a layer of steel wire mesh on the polystyrene board, and then use a cement pressure plate or a wave magnesium board to lay tiles on it. Mul.

2. The paste agent is unqualified.

Unqualified adhesive will also lead to problems such as hollowing and falling off after tile paving. Traditional paving tiles usually use cement mortar as a paste, cement and mortar are usually proportioned according to the ratio of 1:1, if the ratio is uneven, cement mortar can not achieve the required bonding effect; In addition, the high soil content of the sand and the use of inferior or expired cement will lead to problems such as poor pasting and hollowing and falling off of tiles.

It is recommended that the majority of owners use regular home improvement companies and qualified process materials.

For relatively large cracks, styrofoam can be used to plug them. If the flue is made of ceramic tiles, then the cracks can also be plugged with glass glue. However, if the flue crack is very serious, these glues will not play a role, and only professionals can be hired to repair them.

If there is a crack in the kitchen flue tile, the cause of the crack should be investigated first, and then the corresponding measures should be taken. If it is caused by the deformation of the wall, then there will be regular cracks such as horizontal and oblique directions. In this case, you can test the bricks on the light wall before laying them to see how strong they are.

Hello, the treatment scheme for kitchen flue cracks is as follows:1Check:

The flue needs to be inspected first to see the extent and location of the cracks. If it is a minor crack, it can be simply repaired. But if the crack is severe and poses a threat to home safety, the entire flue needs to be replaced.

2.Plugging: If the crack is relatively small, you can use materials with high temperature resistance and good waterproof performance for plugging.

Common materials are refractory bricks, high-temperature resistant glues or special flue sealants. Before use, it should be selected according to the properties of the material whether it needs to be heat-cured. 3.

Replacement: If the flue crack is serious and the plugging is not safe and stable, the entire flue needs to be replaced. At this time, a professional flue maintenance company is required to install it to ensure that the connection between the flue and the gas burner is tight, which can effectively prevent separation problems and air leakage caused by corrosion of parts.

4.Daily maintenance: In order to avoid cracks in the flue, the flue should be cleaned regularly to avoid grease accumulation, and pay attention to the safe operation of gas combustion in the sanitary area to reduce the risk of use by residents.

In short, in the case of flue cracks, effective measures should be taken in time to deal with them to ensure the safe use environment of the home.

Remove it, and if the tile is intact, it can be fixed again with structural adhesive.

I believe that many friends have had such an experience, and after finally decorating and staying for a period of time, they often find some problems. For example, I have a Huidong or a friend who said that there are many cracks in the tiles of the kitchen flue, and I don't know what causes it, and I don't know how to remedy it. What should I do if I encounter this problem?

Let's take a look at the relevant knowledge.

First, how to remedy the cracking of flue tiles.

If the flue is cracked at the 45° chamfer, or there is a gap at the chamfer of the sunny corner, etc., this is a slight situation, and it is good to paste it directly with glass glue; If the crack in the middle of the tile is relatively large, it is likely to be caused by the change of the flue structure, etc., in this case, the tile can be removed, and the base layer is repaired and then re-tiled. If you want to avoid this problem in the future, it is better to close the mouth with the R corner edge first.

Second, how to avoid the flue tile hollow drum falling off.

1. The tiles are not soaked in water.

The water absorption of ceramic tiles is better, because there are more gaps inside the tile, if there is no soaking in water before paving the tile, the tile naturally absorbs the moisture in the cement in the later stage, so the tile and the flue are not firmly connected, resulting in the tile hollowing and falling off.

2. Thicken the plastering wall.

If the thickness of the outer layer of the flue is relatively thin, it will cause the wall to crack and cause tile damage, it is recommended to strengthen the plastering treatment, the thickness of 6cm is appropriate, undoubtedly increase the thickness of the flue wall.

3. Flue hanging net treatment.

It is recommended that the flue should be hung with a metal mesh on the flue wall before tiling, which can make the force of the tile more balanced, so as not to cause damage to the flue itself, and greatly reduce the hollowing rate.

4. Red brick priming.

First, the outer wall of the flue is directly paved with red bricks, and then the outer layer of the red bricks is tiled to make the wall thicker, and the tiles are not prone to cracking and hollowing.

Conclusion of the article: How to remedy the cracking of flue tiles and related knowledge will be introduced to you here, I hope it will be helpful to you. If you want to know more about it, please continue to pay attention to Qeeka Home information platform.

Kiss! Hello, happy to answer your <>

Pro, the treatment plan of kitchen flue cracks: if the flue is cracked at the 45° chamfer, or there is a gap at the chamfer of the sunny corner, etc., this is a slight situation, and it is good to paste it directly with glass glue; If the crack in the middle of the tile is relatively large, it is likely to be caused by the change of the flue structure, etc., in this case, the tile can be removed and the base layer can be repaired in the tiling. How to repair flue smoke leakage:

1. First check the tightness of the flue itself, especially the flue mouth and interface, to see if there is a gap. If there is a gap, it must be glued with glass glue. Or add a stainless steel box to the smoke leak of the flue, and when fixing the box, use glass glue to fix it to prevent smoke leakage.

2. In addition, there are quality problems in the flue itself, and flue gas leakage accidents are also prone to occur, which are difficult to repair after damage, and must be repaired by professionals. Hope mine can help you <>

If you have any other questions, you can ask me again<>

Summary. Hello, to provide you with the kitchen flue crack treatment plan is as follows: The kitchen flue crack treatment plan is generally divided into the following steps:

1.Clean the flue: The flue needs to be cleaned of oil and dust before any repairs can be made.

It can be cleaned with professional cleaners and cleaning tools. 2.Dealing with cracks:

It can be filled with specialized materials such as high-temperature refractory adhesive and gypsum-resistant, or laminated and patched with high-temperature non-combustible materials such as fiberglass cloth. Pay attention to the selection of high-temperature, fire-resistant, seismic and other materials with excellent performance to ensure that the repaired flue can withstand the impact of high temperature and vibration. 3.

Sealing treatment: close the treated cracks to prevent the leakage of gas or other harmful substances. 4.

Reinstall the flue cover: If the crack is dealt with and there are no loopholes, the flue cover needs to be reinstalled to ensure that the fumes are completely discharged. In addition to the above methods, you can also consider replacing the flue and strengthening the maintenance of the flue, cleaning the flue regularly and replacing the flue cover.

Regardless of the method used, it needs to be operated by professionals to ensure the safety and normal operation of the flue.

The flue pipe is bricked and cracked at the chamfer.

How to deal with it. Hello, to provide you with the kitchen flue crack treatment plan is as follows: The kitchen flue crack treatment plan is generally divided into the following steps:

1.Clean the flue: The flue needs to be cleaned of oil and dust before any repairs can be made.

It can be cleaned with professional cleaners and cleaning tools. 2.Dealing with cracks:

It can be filled with specialized materials such as high-temperature refractory adhesive and gypsum-resistant, or laminated and patched with high-temperature non-combustible materials such as fiberglass cloth. Pay attention to the selection of high-temperature, fire-resistant, seismic and other materials with excellent performance to ensure that the repaired flue can withstand the impact of high temperature and vibration. 3.

Sealing treatment: close the treated cracks to prevent the leakage of gas or other harmful substances. 4.

Reinstall the flue cover: If the crack is dealt with and there are no loopholes, the flue cover needs to be reinstalled to ensure that the fumes are completely discharged. In addition to the above methods, you can also consider replacing the flue and strengthening the maintenance of the flue, cleaning the flue regularly and replacing the flue cover.

Regardless of the method used, it needs to be operated by professionals to ensure the safety and normal operation of the flue.

In this case, you only need to clean it up and then apply a layer of glass glue.