The gas stove is hot and can t catch fire, what s going on, there s no gas coming out

When the gas stove is hot, it can't catch fireSteps:

1.Observe whether the spark when the gas stove is lit is soft and weak, and the discharge frequency is significantly slower than before. If this is the case, it means that our battery is running low, and replacing it with a new battery will solve the problem.

2.If the sound of the spark is crisp and powerful, but it does not ignite, then consider whether the gas path is unblocked, it is likely that the nozzle in the furnace is blocked during use, remove the flame splitter cover and use a thin iron wire to pass through the nozzle hole, and then put back the flame splitter cover to re-ignite.

3.Check whether the damper of the gas stove body is adjusted too much, causing too much airflow from the fire hole and impacting the electric spark. You can adjust the damper left and right to try whether the ignition becomes normal.

4.One burner is normal, the other burner is not. The abnormal side is completely non-sparking, and it is an electronic pulse.

One of the high-pressure packs burned out, and the only way to do this was to replace the pulse. If not, then see if it is the above two cases.

5.Several successive ignitions are required and may not always be successful. In this case, thermocouples are common.

Induction gas stoves, caused by the aging of thermocouples for a long time. In this case, the only solution is to replace the thermocouple induction pin.

6.Ignition is sometimes normal, sometimes not. This is mainly caused by pulse ignition micro switches.

Poor contact, adjust the pulse ignition micro switch to solve.

First confirm whether the gas main valve is open, and then whether the nozzle is blocked, if the nozzle is blocked, it is recommended to find the stove manufacturer, let the after-sales solve the problem, do not dredge it yourself. If it can't catch fire, see if the battery is sufficient, otherwise, it is still to find after-sales service to solve the problem.

Check if there is a problem with the gas source, if there is no problem with the gas source, the stove will not ignite may be due to the following reasons: the ignition needle is off.

The damper is not properly adjusted.

The fire cover is not placed properly and deformed.

Blockage of the main trachea.

The nozzle is clogged. The valve body is clogged.

The pressure reducing valve is broken. Fresh gas.

The fire cover hole is blocked. It is recommended to try to unclog the fire hole

1. Whether the battery has electricity or not.

This is the most common problem, and it is also a problem that people are generally concerned about, and when they find that the ignition is not ignited, they should check whether the battery is charged.

Solution: If the gas stove battery is not used or used up, you only need to replace it with an ordinary No. 1 battery.

2. Is there any gas.

Generally, people will have a bottom in their hearts, but some people may be more sloppy, or busy with work, and often forget, so when the gas stove does not catch fire, the first thing to check is whether there is still gas.

Solution: If there is no gas on the gas stove, you need to add gas.

3. Overvoltage protection.

Many gas stoves have an overpressure protection function, which will not be activated once overvoltage.

Solution: If the gas stove is overpressure protected, then you need to change a pressure reducing valve to try.

4. Poor circuit contact.

This is a problem that is easy to ignore and ignore the line, but it is often encountered in many old users, mainly to check whether the positive and negative poles of the battery box are rusty, and whether the line is in poor contact.

Solution: If the gas stove circuit is not in good contact, the rust needs to be removed and the line should be connected accurately.

5. The micro switch is damaged.

At this time, there is a very small place in the gas stove, but it is more difficult to repair than the usual fault, and in general, it is not recommended for the owner to repair it himself.

Solution: The micro switch of the gas stove is damaged, this is a delicate and professional job, and it is best to ask a professional person to solve it.

6. Pipeline blockage.

This is a very common problem, once the pipe is blocked, it is necessary to check the gas outlet valve, generally speaking, you can smell the gas smell and the gas stove does not ignite, it is likely to be a gas blockage.

Solution: If the gas stove pipe is blocked, then the pipe should be unblocked or replaced.

7. Improper position of the ignition needle.

If you want to ignite the fire, the gas stove has certain requirements for the distance between the ignition needle and the fire cover, and once the distance deviates too much, the gas stove will not catch fire.

Solution: Generally speaking, the distance between the ignition needle and the fire cover is 4-6mm, and the fire hole should be aligned.

8. The ignition needle is dirty.

The kitchen is a place that is easy to get dirty, especially easy to get stained with oil, etc., and if the gas stove is left for too long, the ignition needle will be easily stained by oil.

Solution: At this time, you need to clean the grease of the ignition needle and then try to ignite.

9. The gas stove has a high-voltage line and its connection.

The gas stove has a high-voltage line and its joint, once the high-voltage line is aged, it is easy to make a gas stove.

Summary. Pro, why can't the hot gas stove catch fire: The reason why the gas stove can't catch fire 1, is there any gas:

Most people will have a bottom in their hearts about this, but some people may be sloppy, or busy with work, and often forget, so when the gas stove does not catch fire, the first thing to check is whether there is still gas. 2. Overvoltage protection: Many gas stoves have overvoltage protection function, and they will not start once overvoltage.

3. Pipeline blockage: This is a very common problem, once the pipeline is blocked, then it is necessary to check the gas outlet valve, generally speaking, it is likely to be gas blockage if you can smell the gas smell and not ignite.

Hello dear! We'll be happy to answer this question for you. Why can't a hot gas stove catch fire?

Turn off the heat and wait for the stove to cool before starting the fire.

Pro, why can't the hot gas stove catch fire: the reason why the gas stove can't catch fire 1, whether there is gas: most people will have a bottom in their hearts, but some people may be more sloppy, or busy with work, and often forget, so when the gas stove can't catch fire, the first thing to check is whether there is still gas.

2. Overvoltage protection: Many gas stoves have overvoltage protection function, and they will not start once overvoltage. 3. Pipeline blockage:

This is a very common problem, a roll is not blocked pipeline, then it is necessary to check the gas outlet valve to talk about fiercely, generally speaking, you can smell the gas smell and do not catch fire, it is likely to be gas blockage.

Solution 1: Blockage solution: The fire hole of the burner fire cover is blocked by dirt, which hinders the flow out of the burner mixture and cleans up the dirt in the fire hole; The nozzle is blocked, unscrew the nozzle to clean up; The air inlet and nozzle of the pressure regulator are blocked by rust, which hinders the gas flow out of the bottle, and the qualified pressure regulator is replaced; The hose is flattened and the ventilation is blocked, and the hose is straightened. 2. If the lighter is exhausted, we can lift the gas stove and replace the battery at the bottom, usually the gas stove uses No. 1 battery, in order not to affect the use, you can always have a Suihui battery at home, some high-end touch gas stoves and induction cookers on the market are powered by independent power supply.

If you change the natural gas used for the new battery, the cold stove can be lit up, and you can turn off the fire and then turn it off after it is cold.

Pro, it should be that the pressure of the pipeline is too small or the branch pipe is blocked.

This has nothing to do with the battery, it should be that the pipe is blocked, and you need to find a professional to dredge the pipe.

<>If there is no problem with the gas source, the stove can not hit the ember fire may be because the ignition needle is offset, the damper is not adjusted, the fire cover is not placed, deformed, the main air pipe is blocked, the nozzle, the valve body is blocked, and the pressure reducing valve is blocked.

Bad, new gas, clogged fire cover holes, etc., it is recommended to try to unblock the fire holes.

The reason may be that there is no gas, so the flame is small, and the protective needle cannot be burned, if it can't be burned, change the gas, and then use a toothpick to clean the holes. If you still want to extinguish after doing this, you need to ask a professional gas stove maintenance personnel to come to check and repair.

When the gas stove does not catch fire, the first thing to check is the spark when the gas stove is ignited, whether the sound is low and weak, and whether the discharge frequency is significantly slower than before, and if there is no power, replace the battery in time. There are many situations in which the gas stove does not catch fire, but in either case, check whether the battery has charge. If the sound is soft and weak, the electricity frequency is slower than before, and there is a clattering sound, if this happens, it is likely that the battery on your gas stove is insufficient, and it will be solved by changing to a new battery.

It may be that the position of the ignition needle has deviated, in normal use, the distance between the ignition needle and the fire cover is required, if the deviation is too large, it may cause the gas stove to not ignite. You need to find a professional maintenance personnel to check and adjust. There are many reasons why a gas stove goes out, and it is recommended that you first check whether there is a problem with the gas valve and the battery of the stove.

If the service life is too long, it is recommended to replace it with a new one.

This may be due to the improper placement of the ignition pin, which is usually controlled at a distance of 4 to 6 mm from the fire cap and needs to be aligned with the fire hole. If the ignition needle is not cleaned for a long time, especially when there is oil stains, there will also be a situation that the ignition cannot be ignited, and it is necessary to clean the oil stains before igniting. Or because the circuit is in poor contact, you need to check whether there is rust in the positive and negative poles of the battery box, and whether the line is in poor contact, and you need to remove the surrounding rust to ensure that the line is connected accurately.

Gas stove maintenance tips:

1. There will be a lot of oil stains on the gas stove after using it for a period of time, if it is not cleaned regularly, it will not only affect hygiene, but also cause the gas stove to be blocked for a long time, so you must clean the gas stove regularly.

2. If there are abnormal phenomena such as deigniing, tempering, and yellow flame in the gas jujube flame, the damper needs to be adjusted to make the flame normal.

3. Observe the flame state often in use, and find the flameout caused by boiling water, wind and other reasons in time. If there is a pungent burnt smell, leaking odor, or abnormal burning sound, the air source should be turned off immediately, and the cause should be checked and repaired before use. When there is a gas leak, the window should be opened for ventilation, and the range hood, exhaust fan and other electrical appliances should not be turned on to prevent the spark from igniting the gas.

4. Regularly check the air tightness of the stove and gas supply system with foaming agent, and if you can't solve it, you need to find professionals to repair it.

It may be that the gas stove has gas but does not catch fire due to the following reasons:

1.The spark from a match or lighter is not strong enough to ignite the gas.

2.The fire port or nozzle is clogged with oil or dust, causing the gas volt to be ejected properly.

3.A malfunctioning gas pipeline or valve prevents the gas from flowing properly.

4.Incorrect placement of the fire port or nozzle prevents the gas from mixing with the air to achieve ignition conditions.

5.The ignition of the gas stove is faulty and cannot be ignited properly.

Workaround:1Replace matches or lighters to make sure the spark is strong enough.

2.Clean the fire port or nozzle to ensure that the gas is ejected properly.

3.Check whether the gas pipeline or valve is normal, and repair or replace it in time if there is a problem.

4.Adjust the position of the fire port or nozzle to ensure that the gas is mixed with air to achieve the ignition condition.

5.Repair or replace the ignition of a gas stove.

It may be that the gas stove has gas but does not catch fire due to the following reasons:

1.Matches or lighters do not ignite gas: Check that the match or lighter is working properly and that the gas is ignited.

2.Gas pipeline blockage: Check if the gas pipeline is blocked, you can clean it with a blowing pipe.

3.Flame hole blockage: Check if the flame hole is blocked, you can clean it with a toothpick or needle.

4.Flame sensor failure: Check if the flame sensor is working properly and whether it needs to be replaced.

5.Gas valve failure: Check if the gas valve is working properly and whether it needs to be replaced.

If none of the above methods can solve the problem, it is recommended to contact a professional gas maintenance personnel for maintenance. At the same time, it is necessary to pay attention to safety when using gas stoves to avoid Tongling accidents. Eggplant.