-
How to deal with the wear of the watch glass:
If the watch is accidentally scratched or cracked by a key, it can be used temporarily. However, for watches with precision operation, the waterproof and dustproof performance of the watch will decrease at this time, and it should be replaced by a professional watch store as soon as possible. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball to remove the scratches and make the watch glass as new.
In the case of severe damage such as explosions, broken corners and severe breakage, and debris all over the dial, the following measures need to be taken immediately: the first thing to do is to stop the watch. Pull out the watch handle and stop the watch from running.
Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards. Never dial hands and fast-setting calendars, and never try to remove broken glass from the dial yourself. When sending the watch to the watch shop for repair, the watch needs to be placed flat (preferably with the glass side down) in the box, and there should be no violent vibration and shaking during the repair.
During the repair process, the maintenance personnel need to be told not to let the glass shards damage the dial and watch hands.
-
Hello, glad to answer for you.
When there is a crack in the watch cover, it will cause the watch to lose its water resistance, and it will also affect the appearance.
Therefore, it is recommended to go to the counter store in time to replace the watch, so as not to accidentally enter the water and cause unnecessary losses.
When the watch completely bursts and the glass chips are all over the dial, it is necessary to immediately pull out the watch handle and let the watch stop to prevent the glass from scratching the dial.
In the process of sending for repair, it is best to lay the watch mask down flat and try not to shake the watch.
-
Hello, glad to answer for you.
Depending on the degree of damage to the glass, there may be scratches, cracks, broken corners, and complete breakage. If the corners are broken and completely broken, the glass of the watch must be replaced.
Table Correct treatment method for glass breakage:
1. Never dial the needle, nor can you adjust the calendar quickly.
2. Remember to pull out the watch handle, let the watch stop, and send it to the after-sales center immediately.
3. During the repair process, avoid severe vibration and shaking that will cause the watch to be damaged twice.
The above treatment method is to prevent the hand from driving the glass shards to damage the dial twice when moving, so as to avoid greater losses.
-
When your watch is accidentally dropped to the ground, or the glass of your watch is damaged due to various bumps, depending on the degree of damage, there may be scratches, cracks, broken corners, or complete breakage. If it is only scratches and cracks, it can be improvised, of course, the watch is not beautiful, and the glass of the watch must be replaced if the corners are broken and completely damaged.
Pull out the watch handle and let the watch stop.
You must not dial the hands or adjust the calendar quickly.
Lay your watch flat (preferably with the glass side down) until you reach a service center.
Do not shake or shake violently.
Tell the service center to be careful not to let glass chips damage the dial and watch hands during disassembly and repair.
-
Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.
The watch has scratches.
In fact, there is a very simple way, when there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe back and forth with a cotton ball, you can remove the scratches and make the watch glass as new. In serious cases, you can go to polishing.
As the process of the surface of the case, there are basically two kinds: polishing and sanding, or both, grinding the scratches on the watch case, but also according to the original process, a large area of hair wear is easier to do; However, if there are deep hard scratches, it will be more troublesome, because neither polishing nor sanding techniques are enough to polish away such scratches.
-
The only way to break the glass is to replace the glass, and there is no way to repair the glass.
If the glass is broken, there will be glass slag, such as the watch with day and date functions, the glass slag will fall into the movement, the first thing to do is to pull the watch handle out of the second gear to stop the watch from moving, so as not to jam the gear with the glass slag, resulting in secondary injury.
It is recommended that you send it to the repair shop in time for internal testing and repair, so as to avoid further damage to the inside of the movement due to excessive time. You can open the warranty coupon attached to the watch purchase, and there will be a service address on the warranty coupon under normal circumstances, or find a regular watch service center for inspection and repair.
Room 1102, Block D, Bloomage International Center, No. 6 Jianguomenwai Street, Chaoyang District, Beijing.
-
1. Pull out the watch handle and let the watch stop.
2. How to deal with the crackage of the watch? Never dial the hands, nor can you quickly adjust the calendar3, the watch is placed flat (preferably with the watch masked facing down), and the watch should be placed flat until it is sent to a watch repair shop.
4. Do not do violent vibration and shaking during this period.
5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.
-
Replace it, you can change it after sale, but it's a bit expensive.
-
Piaget&After-sales&Dongdan Oriental Plaza E1 block 8F The following is how to deal with scratches on the watch case:
There are basically two kinds of processes on the surface of the case: polished and sanded, or both, and the scratches on the watch case should be repaired according to the original process. However, if there are deep hard scratches, it will be more troublesome, because neither polishing nor sanding techniques are enough to polish away such scratches.
The local deep scratches on the case or bracelet need to be done locally before repairing, depending on the location, such as the case side of the case, and even possible to use a fine small file, more is to use oil stones, and then under the magnifying glass, carefully boring the deeper scratches, if there are deep scratches, it is necessary to focus on polishing the local first with oil stones. This needs to be carried out under a magnifying glass, the purpose is to evenly smooth the scratches, when the scratches are basically ground to be smoothed, choose sandpaper with the right particle size, and grind along the original sanding pattern, usually this line is radial with the dial as the center, so this is a careful work, to a little bit, the grinding effect will be good and realistic.
-
For local deep scratches on the case or strap, it is necessary to do local treatment before repairing, such as the case side of the case, and it is even possible to use a fine small file, more often with a stone stone, and then under a magnifying glass, carefully boring the deeper scratches.
It is not difficult to fix the scratches on the case strap with sandpaper yourself, as long as you are careful and steady. However, regarding the surface is a polishing process, it is necessary to use a cloth wheel polishing machine, and it is recommended to send it to the brand after-sales service or other watch repair institutions to find professionals to deal with it.
To look at the factory label on the back of the case, usually Piaget men's watches will have the brand logo on the label, and the number of watch numbers will be identified. Some Piaget watches also have laser security on the back label. >>>More
In fact, it is a common thing for dust to enter the watch dial, which is not very strange, after all, in this environment of life, dust is everywhere. Dust that enters the dial of a watch is usually due to gradual penetration during prolonged wear. If only fine dust is entered, there is no need to clean it without affecting the appearance and use. >>>More
There is a special mechanical watch demagnetizer for mechanical watch magnetization, and there is no need to open the back cover of the watch, and the demagnetizer can be turned on the watch a few times to eliminate magnetization. You can go to an experienced and professional watch repairer** to deal with it.
watch maintenance; 1) When wearing a watch, the sweat on the hands is corrosive to the watch shell, the all-steel case is better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, which is in contact with sweat for a long time, and is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat. >>>More
1.General watch cleaning tools, general hand tools include watch brushes and cleaning liquid. It is very simple to use ordinary tools for cleaning, and the cleaning fluid used is 120 jet gasoline. >>>More