CORE: What to do if you remove one edge of the rectangle?

Cropping, carving knife, eraser are all fine.

Step 1: Right-click on the rectangle and select Convert to Curve.

Step 2: Select the second tool on the left (the Shape tool) and use it to select the rectangle. Right-click on the rectangle. Select Break up.

At this time, there are a lot of triangles, select the triangle on the rectangular line, you can choose which triangle you want to delete, after selecting, press del to delete.

Do you want a single-line drawing, or closed to fill the color, if it is to fill the color, you need two rectangles to intersect, and then crop, not to fill the color is to draw a rectangle and then turn, the two nodes on the unwanted side are scattered, and then separated, delete the edge strips.

Upstairs are all crooked: First of all, select - turn - shape tool - select all four nodes - right-click to split - pick tool - split curve in layer. That's it.

It's as simple as drawing three lines and closing the path.

Just follow the steps in the diagram. Draw a rectangle first, then turn a curve, select the shape tool, circle 2 nodes, and select Break. Then split, after splitting, select the line segment you want to become dashed, and select the dashed line style. Look at the picture.

Draw a box to turn the curve to select two nodes to disconnect delete .Select the detached one, change the outline pen to a dotted line, and it's almost the same.

If you delete a node, you will lose the line, and the dotted line can be selected in the edge type.

1. Delete a bai branch line segment du of a rectangle mainly to use the zhi shape tool, and the rectangle of the rectangle tool to draw dao are all objects, to.

Right-click on the rectangle to convert it to a curve.

Tap the Shape tool.

Click the point where you want to remove the old edge, click the break curve in the toolbar, click the next point, and click the break curve.

Find the two vertices of the line, delete it, and you're good to go!

That's probably what it means!

1. Open coredraw, here.

Demo with x6 version.

2. Create a new default text.

File. 3. Then start drawing, here use the rectangle tool to demonstrate, 4. Draw a rectangle on the artwork, now you see that it is still a solid line, click the left button to select it.

5. Then click the "Contour Pen" tool in the left toolbar.

6. Then select the style of the dashed line in the "Style", and then click OK.

7. After zooming, you can see that the implementation has become a dotted line.

1.Start by drawing a rectangle.

2.Select the object - press CRTL+Q to turn it into a curve.

3.Select the Shape tool F10

4.Use the shape tool to select the node of a line you want to break and press shift to increase and select another node (to break this rectangle and separate a line, you must break two nodes) and then select the - Split Curve command, and then select Arrange - Separate Curve - select a line after you have separated and press F12 to select a dashed line, or you can change it directly in the property bar, both can change it to a dashed line, and finally select the dashed line and the solid line to group it.

The two ends of that edge are separated by nodes and then the shape is exploded, and the straight edge can be set to the shape color independently.

Select the rectangle you want to remove, left-click on the cross on the palette if you want to remove the fill color, and right-click on the cross on the palette if you want to remove the border.

1. Right-click bai

Click on the top of the color wheel on the right, and there is a cross in the middle of the white icon.

2. Double-click the outline color back block in the lower right corner, and select [None] in the outline panel [Width] below.

3. Directly next to the pen icon in the upper toolbar, select [None] Fourth, left-click [Contour Tool] in the left toolbar and select [No Contour].

Press the right mouse button on the fork to remove the border.

In the menu bar in the third row, there's a command called "Select outline width or type a new width", which looks like a pen! Changing this command to "none" should be fine!

1. Open AI to create a rectangle.

2. Click the three dots at the bottom of the toolbar.

3. Drag the Trace tool to the toolbar.

4. Add dots on both sides of the corners.

<>6. Use the Delete Trace tool.

7. Delete vertices.

<>9. Click to use the white tool.

10. Select a point.

11. Smooth.

12. Hold down the shift and pull down the right wrench point.

13. Flatten the sideline.

Very simple. Draw a rectangle with the Rectangle tool.

Select an edge with the Pen Tool and add a point in the middle.

Use the direct selection tool to select this point and press delete to delete it.

I do this by using the scissors tool to point once at the end of the edge you want to delete, and the edge is cut out, find it from the Layers panel, and delete it.

Select the rectangle, use the break point function, break the upper and lower points of the right line, and delete the right line.

Select the rectangle, use the burst command, select the edge, and delete it.

Select the rectangle, type the x explode command, press enter, and you're ready to delete the line you want to delete.

Select the object, interrupt it with the x command, and then delete the edge you said.

1. First of all, open the Visio software on the computer and enter the operation page.

2. Click Create Basic Flowchart.

3. Then click on the basic flowchart shape, select the flow shape, and draw a process shape in the body.

4. Then you can see from the drawn shape that the shape is filled with white by default and has a shade of gray.

5. Finally, select the shape and click the No Shadow option under the Shadow tool in the shape group under the Start tab.

6. In this way, the shadow of the shape is canceled.

There are two ways to do this.

1.Draw a rectangle directly with the Drawing Tools.

Open the drawing tools: View - > toolbar - > drawing tools with "straight lines" to draw a rectangle of three sides - > combination.

2.Use Actions to remove an edge.

Shape Drawing Tools: (see above).

Draw a line that overlaps one side of the rectangle with "Line" - > select the "Rectangle" and the line - >menu) shape - > operation - > trim.

Method 1: It is indeed possible to use three lines, because you cannot fill in the color after removing one edge.

Method 2: As shown in the figure below, to remove the left edge of the large rectangle, first frame it with a small rectangle, and then switch to the pointer to select them all - > development tools - > operation - > trim - > click on the unwanted edge and press delete to delete.