How to operate the car correctly, and are there any tips that need to be paid attention to?

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.

How do you get a ride on the roadside assistance? Now that the car is popular for mass consumption, as our driver friends still have to master some basic operating skills, some inevitable small accidents will be encountered during driving, and the car will not ignite the fire without electricity? How do you check and judge?

Let's take a look at it today:

1.The key shows that there is electricity in the first gear, but it still does not ignite the fire. (Need to test the voltage is lower than 10 can not start the car) can push or slide to fuel the engine, but pay attention to safety and timely charge the battery, you can start the car for more than one to two hours to fully charge the battery.

2.The key does not burn what signal symbol is not, and the battery is not reflected in the display indicating that the battery is out of power, at this time, it depends on how many years your battery has, and the battery for more than 2 years will directly consider changing the battery, under normal circumstances, the battery life is about two to three years, and it can be used for about 4 years if it is well maintained.

3.If your car doesn't catch fire on the highway outside, there are two ways to do it.

Type 1: 1Hit your insurance company** and let them handle it for you. 2.Tell the other party about your location and car.

3.Place safety warning signs 100-150 meters away from incoming vehicles. 4.If you get off the highway by yourself, stay on the side of the highway and pay attention to safety.

The second: 1You need to have a power cord to use it. (Tmall** has dozens of hundreds of yuan a pair).

2.A car passes by and the driver of the other party to discuss whether it can be powered off. (The average driver will agree, unless he has something urgent3.)Turn on the engines of both cars and fix the engines.

4.Find the car battery (some cars have a battery cover that needs to be treated slightly).

5.The most important line is the positive pole of the battery in the red line, and the negative pole in the battery in the black wire, you can take the car on one side first, and at the same time, it is easy to make a mistake and burn the battery together, so it is best to operate alone to avoid mistakes. (Remember).

6.After the line is set up, you need to start the car to ignite, and you can take the line after it is burned.

7.After the car is ignited, it is recommended to bake the engine throttle and avoid stalling.

8.If the fire is not lit, it will be troublesome if the wiring line is wrong and it is not lit again. (This needs to be handled by a professional).

First of all, the displacement of the electric car should be greater than or equal to the car without electricity, and secondly, the positive and negative electrodes should be connected, and the fire should be ignited after being connected. If you are a trick, the clip of the battery must be firmly stuck.

Electrifying a car is a very professional job. It is recommended to go to a professional car repair shop for lapping. Don't blindly tie it up yourself.

Pay attention to the power of the car, turn off the car first. Connect the positive and negative poles of the battery to the other battery, and then start the vehicle. After the car starts, it needs to run for about half an hour before the battery can be fully charged.

Hello everyone, what embarrassing things have you encountered in the process of using the car? Perhaps the most common and embarrassing is when the car runs out of gas and electricity. It's a good solution to run out of gasoline, but a dead battery may overwhelm some riders.

In this issue, we take the new Magotan as an example to talk about the model without automatic start and stop, how to take the power correctly when the battery is out of power.

<> under normal circumstances, as long as the vehicle with battery loss can be ignited smoothly after the above steps. Again, I would like to emphasize the points that need to be paid attention to: 1. Before setting up the wire, be sure to turn off the engine first; 2. The connection must be strictly in accordance with the above connection steps, and the two vehicles must not be in contact; 3. The order of stitch removal is just the opposite of the order of threading

Dismantle the grounding, remove the negative electrode, remove the positive electrode of the tram, and finally dismantle the positive electrode of the tram.

Although it is rare to use the battery, there is nothing wrong with understanding it, at least when you really need it, you can calmly save yourself.

Automobile power is a way to start the car by connecting the circuit of a nearby normal car to the target battery. Be sure to turn off the engine before borrowing power, pay attention to the parameters of the batteries on both sides to see if the specifications are close. After confirmation, connect the battery of the other car's car and the battery of your own car in parallel, that is to say, the negative electrode to the negative electrode, the positive electrode to the positive electrode, and you can get on the car after the connection is completed.

Don't rush to turn off the engine after getting into the car, remove the tie cord first. Then let the car run for a while, preferably to be able to test drive for a while, and charge the car battery somewhat. If you are not in a hurry, you can park the car in a safe place, check whether the car battery is faulty in a place with backup power supply, and pay attention to replacing it in time.

Generally speaking, the service life of the car battery is 2-3 years, and the service life is almost up, do not wait for the battery to be unusable before replacing it, it should be replaced in time. Some batteries also provide a status observation window, usually pay attention to the color inside: green means that the battery is normal, black means that the battery life is up, and white means that there is no power and needs to be charged.

The method of taking power when the car is out of power is as follows: 1. Prepare two wires, and you need a car that can supply power. 2. Remove the buckle of the battery box to open the battery protective cover, exposing the positive and negative poles of the battery.

Whether it is a rescue vehicle or a rescue vehicle, the operation of the battery should be carried out in the flame-off state. 3. Be sure to confirm the positive and negative poles of the battery, if you can't distinguish the battery.

The car needs to pay attention to whether it is 12V, more than 12V can not be used, and then the positive pole is paired with the positive pole, and the negative pole can be paired with the negative pole.

The positive electrode and the positive electrode, the negative electrode and the negative electrode, and then start the key switch many times, give the throttle a few more times, and then unplug it, you must pay attention to safety.

To put it simply, the positive electrode of the battery is connected to the positive electrode, and the negative electrode is connected to the negative electrode.

It is necessary to turn off the engines of the two cars after they are all turned off, and then they can be used to take the electricity, and the correct way is to connect the positive pole and the positive pole according to the way after the ignition is turned off, and connect it after checking the line.

1.Prepare two batteries to be wired;

2.Align the front of the two vehicles together;

3.Fix the battery lap on the battery, the positive electrode to the positive electrode, the negative electrode to the negative electrode, and start the normal vehicle at this time;

4.Start the vehicle that is being powered and disconnect it quickly after starting.

To prepare the battery wire, in order to connect these two wires and the rescue vehicle together, be sure to distinguish the positive and negative poles, pay attention to safety when connecting, be sure to turn off the car, but also find the location of the engine, you can seek the help of professional and technical workers.

Don't turn on the power supply, the positive pole is paired with the positive pole, and the negative pole is paired with the negative pole, so that you can carry out the power ride, this way is correct.

The positive electrode should be chosen to be placed on the positive pole, so that the power can be carried out. Be sure not to hurt yourself, and you should also pay attention to the difference between positive and negative poles.

The correct way to ride the car is described as follows:

Tools: Volkswagen Magotan red and black with wires, batteries.

1. The owner first needs to prepare the car to take the wire, generally red and Lingzhen only black wire, red is the positive wire, black is the negative wire.

2. Connect the red wire to the terminal post of the positive pole of your vehicle battery at one end and the positive terminal post of the ambulance vehicle at the other end.

3. Then connect one end of the black wire to the negative terminal post of your vehicle, and the other end to the negative terminal post of the rescue vehicle, be careful not to touch the body to avoid a short circuit in the vehicle.

4. The vehicle can be started after the wire is connected, and after the vehicle is successfully started, the two wires need to be removed respectively. After half an hour of engine operation, the battery will be fully charged.

5. The owner can drive the vehicle at this time, and the battery will be charged when the vehicle is driving, so that the vehicle can be used every day.

1. Prepare two battery lines, the rescue vehicle and the rescued vehicle should be head to head, and the rescue vehicle does not need to turn off; 2. Find the batteries of the two cars and distinguish the positive and negative poles of the batteries; 3. A section of the red cathode battery line of Lingchunchang is connected to the positive terminal post of the rescue vehicle battery, and then the other end is connected to the positive terminal post of the rescued vehicle battery; 4. One section of the black negative battery cable is connected to the negative terminal post of the ruler rescue vehicle battery, and then the other end is connected to the negative sen annihilation terminal of the rescued vehicle battery.

After the battery cable is connected, it can be started normally in the rescued vehicle.

Note: When wiring, you should connect a wire and then connect a wire, rather than a car and then another car. Remember not to let the positive and negative poles touch together, otherwise it will cause a short circuit.

Hello dear, the correct way to ride the car is as follows: 1Confirm that both cars have been turned off and that the handbrake has been tightened.

2.Turn the power switch on and connect the cable clamps to the positive and negative terminals of the batteries in both cars. First, connect the positive pole of the battery cable clamp.

Remember, connect the red cable clamp first. 3.Attach the cable clamp at the other end to the positive terminal of the spare battery of the newer car and to one of the metal parts of the older car.

For older cars, you can choose any metal part on the body, such as screws on the wheels or metal frames on the body. Remember, connect the black cable clamp first. 4.

Start the newer car so that the current starts flowing. Make sure the engine of the newer car is idling properly. 5.

Wait about 5 minutes for the current to flow steadily between the two vehicles. After 5 minutes, you can try to start the older car. 6.

As soon as you start the older car, disconnect the cable clamps, first the black cable clamps of the older car, then the red cable clamps. Then there are the cable cleats on newer cars. After another minute or two, walk to turn the older car around, and don't turn off the newer car in the process.

This ensures the charging of older car batteries, in short, the correct connection of cables and the correct use of them is the key to the car crash.

The correct way for the car to take the power is to prepare two battery lines, the rescue vehicle and the rescued vehicle should be head to head together, the rescue vehicle does not need to turn off, distinguish the positive and negative poles of the battery, do not connect the positive and negative poles wrongly, do not let the positive and negative poles touch together, Tan Xun will cause a short circuit, after the battery line is connected, it can be started normally.

If there is no charger, you can idle for a period of time to charge the battery, but pay attention to the vehicle in a ventilated environment during the idling process. The purchase of car wires should be selected with the best quality assurance wire, try to choose a thicker one, the outer diameter is at least 10mm or more, and the length is about 3 meters.

Correct operation

Don't start it frequently, because the starting current can reach hundreds of amperes, and the load of the battery is larger, which seriously affects its performance, and it is more difficult to start again, and the correct way is to try to start it every once in a while. Do not use high-power electrical equipment when not on the car or idling, because the engine speed at this time is not high, and the power generation of the generator is not enough to meet the high-power electrical equipment, so the battery needs to intervene, so it is very consuming battery power.

In order to prevent the car battery from running out of power, turn off the electrical appliances on the car before the car is turned off when the car is used daily. In particular, avoid not turning off the air conditioner before turning it off. When it is started again, it will hurt the car battery.

The car cannot be parked for a long time, and every once in a while it is necessary to run on the road for 20 to 30 minutes to charge the car battery.