What can I use to remove 502 glue stuck to my clothes?

502 glue removal method on clothes.

Step 1: If the area of 502 glued to the clothing is not large and the quantity is small, you can use the physical conventional method.

Step 2: Soak the towel in boiling water for a period of time, wring out the towel and apply it to the clothes, keeping it sealed for about 10 minutes.

Step 3: Repeat the process several times until SCP-502 gradually softens under the influence of temperature and humidity, and then removes it with a cotton swab.

Step 4: If the area is large, some substances can be used to make it react with 502 to eliminate the effect, such as nail remover.

Step 5: Flip the clothes, pad them with a towel or cloth strip where they stick to 502, dip them in a brush to remove nail water and drop them to the place where 502 sticks, and then brush them with a brush.

Use a wet towel, this is the simplest one, apply a wet towel directly to the glue stain, 502 will soften after a while, and then wash it off.

It's easy to remove when you talk, you can use some special things to drag oil, or drag some, um things, and wash them very cleanly, such as laundry detergent, and there is also a good wash and clean there, or you can pick it off with your fingernails slowly.

The moment it sticks, quickly soak the clothes in water, and then use a brush to quickly brush them, and you can clean them up.

The adhesive remover can remove 502 glue very well, and other adhesive glues with strong stickiness can be removed.

The glue solidifies and the glue is removed with a degumming agent.

You can use banana water to drop on the 502 glue stain of the garment. Or go buy a little acetone, because the solvent of 502 is acetone.

The solutions to the 502 glue on the clothes to become very hard are:

1.Apply a damp hot towel directly to the glue stain, and 502 will become soft after ten minutes, and then wash it off.

2.Melt the same 502 on the area where the 502 stain is stained, and remove it quickly with water when the cured 502 is soft.

3.Using insulating oil, the insulating oil works very well, and the 502 glue can be softened quickly, and then it can be washed off directly.

4.If 502 is glued to a small area, soak it in hot water, and only need to soak for 5-10 minutes.

5.Apply the vinegar evenly on the 502 glue with a cotton swab, and after the vinegar spreads, scratch back and forth on the sticker with a cotton swab, and the sticker will peel off.

The polluted part of the clothing can be soaked in warm water, then rubbed by hand and washed with washing liquid; You can apply cool oil to the place stained with glue, and then peel off the glue with a cotton swab; Use a dropper to drop acetone around the glue and gradually dissolve it from the outside to the inside. Here's how:

1. The clothes are stained with 502 glue, soak the polluted parts of the clothes in warm water, and rub them by hand when the stains are dissolved by water until all the stains are rubbed off. Then wash it again with washing liquid, and finally rinse it off with clean water.

2. You can gently apply some cool oil in the place stained with glue, rub it gently with your hands for a while, and after about ten minutes, you will find that the glue has become soft. Then use a cotton swab to gently follow the lines of the garment, peeling off the glue little by little. The process must not be rushed, otherwise it is easy to hurt the clothes.

3. The effect of using acetone to remove 502 glue is better. Make sure that the garment stained with 502 glue does not contain acetate before using acetone. It is best to turn the garment on the back and put an absorbent material (clean towel, cloth or toilet paper, etc.) under the stain.

Use a dropper to drop acetone around the stain and gradually dissolve it from the outside to the inside, or you can put a layer of cloth on it to gently squeeze and tap to help dissolve. Then replace the adsorbent material and repeat the above operation until it is dissolved. In addition, acetone may have an effect on the color of some fabrics, and it is necessary to test it at the back corners before using it.

To remove 502 glue stains, you can first dissolve them with banana water, acetone, 502 glue, and insulating oil, and then you can easily wash them off.

Method 1: Drip banana water on the glue of the clothes, and then brush with a brush, and the glue will be brushed off;

Method 2: Add an appropriate amount of acetone to the glue of the clothes, the glue can be dissolved, and finally the clothes can be washed;

Method 3: 502 glue can be dissolved with 502 glue itself, and the same 502 can be used to melt in the place stained with 520 glue;

Method 4: Apply the insulating oil to the glue, the 502 glue can be softened quickly, and it can be washed off directly.

Summary: To remove 502 glue stains, you can first dissolve them with banana water, acetone, 502 glue, and insulating oil, and then you can easily wash them off.

Hello <>

502 glue is more difficult to remove once it sticks to clothing. Here are a few ways to remove 502 glue:1

Use alcohol or white vinegar: Apply alcohol or white vinegar to 502 glue, let it stand for about 30 minutes, and then gently wipe it with a brush. 2.

Use cleaning oil: Apply the cleaning oil to the 502 glue, rub it slightly, and wipe it with a cotton cloth. 3.

Use degreased gasoline: Apply degreased gasoline on 502 glue, wipe it with a brush for a few minutes, and then wash it with laundry detergent. 4.

Use dishwashing detergent: Mix dishwashing essence with water and apply it to 502 glue, let it stand for 10 to 15 minutes, then gently wipe it with a brush, and then wash it with water. It should be noted that when using the above methods, the test must be done in an inconspicuous position first, so as to avoid greater losses caused by cavity.