How many kilowatts can a 16 square copper wire 220V carry?

by three-phase motor.

The formula is: p=

So the power p = kilowatts, cos is. The voltage is 220V, and the safe current carrying capacity of 16 square copper wire is 90A.

Power p=voltage u current i;

The safe ampacities of 16 square millimeters of copper conductor are 80A;

Power p = 220 80 = 17600 watts = kilowatts.

16 square copper wire can carry 53 kilowatts.

Check the table below that the current carrying capacity of 16 square copper wire is 94a, so according to the power formula there are:

p=53kw (calculated according to the three-phase mains, the power factor is taken.)

16 square copper wire 220V can carry kilowatts.

16 mm².

The safe ampacity of the copper core openwire device is 91**.

It can be installed with electric heating and incandescent lamps.

tungsten halogen lamp (tungsten iodine lamp, tungsten bromide lamp) single-phase 220V electrical appliances; If it is two wires through the steel pipe, the safe current carrying capacity is 71**.

It can be installed with electric heating, incandescent lamp, tungsten halogen lamp (iodine-tungsten lamp, tungsten bromine lamp) single-phase 220V electrical appliances; If it is three wires through the steel pipe, the safe current carrying capacity is 64**; It can be installed with electric heating, incandescent lamp, tungsten halogen lamp (iodine-tungsten lamp, tungsten bromine lamp) single-phase 220V electrical appliances;

The safe ampacity of the wire is closely related to the ambient temperature at which the wire is located, and generally the lower the ambient temperature, the higher the allowable current.

Large, take the aluminium rubber insulated wire as an example, when 25 its safe current carrying capacity is 25a, then the temperature rise in continuous use will not exceed 65, and at 35, the safe current carrying capacity drops to 21a, because the former allows the temperature to rise to 40 and the latter is 30.

It is also related to the wiring method, which is better to be exposed to air than to lay in a pipe to dissipate heat. It should be set in the line.

Necessary overcurrent protection devices. Users are not allowed to extend the line or use high-power electrical appliances such as electric stoves without authorization, and are not allowed to change the setting value of overcurrent protection devices without authorization, such as replacing fuses with copper wires.

Wait. The above content reference: Encyclopedia - copper wire.

Household 16 square copper wire can drive 21 kilowatts.

The current that 16 square copper core wire can withstand is about 85 amperes, if the voltage of 220 volts is used, the load power is about 18 kilowatts, if the power supply voltage is 380 volts, the load power that can be driven is about 54 kilowatts, but in actual use, it is also affected by the wiring situation such as wire spacing, insulation, joint treatment, wiring length, etc., as well as the external environment such as temperature, humidity, air pressure, etc., so it is necessary to reserve a part of the power in advance to ensure the safety of use.

、About the aboveHow many kilowatts can this 16 square copper wire carry? The problem is this, for example, in single-phase electricity（220v），

It depends on what load and what voltage you have, take 220V single-phase electricity as an example, check the "Electrician's Manual", the interception current of 16 square copper wire is 83A, and the resistive load can be 220V 83A 18260W, which is about kilowatts.

According to your description, generally one square copper wire has a current carrying capacity of about 6 amps, and a 16 square copper wire has a current carrying capacity of about 96 amps, and if the voltage is 220 volts, the current used in one kilowatt is about 4 amps, so 16 square copper wires can drive 24 kilowatts of power.

A 16 square copper wire can carry 56 kilowatts because its current is the same as that of a 25 square aluminum wire.

It depends on whether the open line is laid or the dark line is laid, whether it is single-phase electricity or three-phase electricity?

If it is laid on the open line, you can refer to the chart below, if it is laid on the dark line, the maximum power should be lowered by a specification.

It doesn't matter if you use 220V AC or 380V AC. Because of the 16 square copper wire, if it is within 50m, it can generally carry 100A. If you use 220V AC, it is 22kW.

If it is a three-phase 380V alternating current, the circuit with a motor can reach 50kw.

If the load voltage is 380V, 16 square millimeters of copper wire can carry a load of 25kW.

The on-load power is related to the voltage, the higher the voltage, the greater the power. Of course, it is necessary to pay attention to the allowable insulation voltage of the copper wire. Taking 220V voltage as an example, if the estimated current of 5 ampere per square copper wire is estimated, the on-load power is 220*16*5=17600, that is, kilowatts.

16 square copper wire, 220 volts of household appliances, 220 * 6 * 16 = 21120 watts, about 21 kilowatts.

16 square meters of copper wire, how many kilowatts of power this belt, basically should be able to bring more than 10,000 watts of Yariwan!

Hello, I am happy to answer for you. The 16 square copper wire can carry about 30 kilowatts under the condition of 220 volt two-phase mains. The current carrying capacity of 16 square copper wire is 94A, so according to the power formula, there are: p = calculated according to the two-phase mains, and the power factor is taken.

<> make the key Jinqin use the line, and within 400 meters of the empty line, 380 volt three-phase alternating current can drive 50 kilowatts of electrical appliances.

The chain resistant body depends on whether it is a single-phase group or a three-phase electricity?

You can refer to the following diagram to call the wisdom table:

Hello, glad to answer for you. 16 square copper wire energy sold with 28kw 16. First of all, the current carrying capacity of the 16 square copper hail Zheng compass core wire is about 94a, according to the three-phase power calculation formula Power = voltage * voltage phase * current * power factor, that is, the safe current carrying capacity of the 380 * square millimeter copper core wire open-wire device is 91**, which can be installed with electric heating, incandescent lamp, halogen tungsten lamp (iodine-tungsten lamp, tungsten bromine) single-phase 220V electrical appliances; If it is two wires through the steel pipe, the safe current carrying capacity is 71**.

Hope mine is helpful to you.

Questions. You just say how many kilowatts it can carry.

28 kilowatts.

per square kilowatt (maximum), do your own calculations.

Large electrical equipment such as motors are usually connected by 16 square wires, so how many kilowatts can a 16 square copper wire carry?

1. How many kilowatts does a 16 square copper wire take?

1. Three-phase circuit.

The 16 square copper core wire can carry about 51 kilowatts in a three-phase circuit. You can calculate according to the formula p=. The safe carrying current of 16 square copper core wire is 91A, the voltage is 380V, and the COS is generally taken, and the kilowatt is taken.

2. Single-phase circuit.

If a 16 square copper core wire is used in a single-phase circuit, it can carry about 20 kilowatts. You can calculate according to the formula P=UI, the safe carrying current of 16 square wires is 91A, the voltage is 220V, and 91 220=20020W 20 kW. Different laying methods of wires and different installation environments will lead to different bearing power of wires.

Second, what are the precautions for wire purchase?

1. We should pay attention to the specifications and models of wires when choosing wires, generally square wires are mostly used as lamp wires, sockets, low-power electrical appliances are mostly used with square wires, 4 square wires are mostly used for high-power electrical appliances, and 6 square or 10 square wires are mostly used as household wires. When choosing wire specifications and models, we should understand the power of household appliances.

2. When we choose wires, the colors of fire, zero and ground wires should be different, for example, the fire wire guard can be red, and the neutral wire guard can be blue. Different types of wires have different colors, and we distinguish wires when wiring in the later stage, reducing the probability of low line connection error. When purchasing wires, we also need to check whether the wires have a certificate of conformity and whether they have passed the 3C certification, and the wires that have not passed the 3C certification are usually counterfeit and shoddy products.

Summary: About how many kilowatts of 16 square copper wire is belted, I will briefly introduce it to you here. I hope that after reading this article, you will be able to understand how many kilowatts can be driven by 16 square wires.

Power p=voltage u current i;

The safe ampacities of 16 square millimeters of copper conductor are 80A;

Power p = 220 80 = 17600 watts = kilowatts.

Hello, I'm glad to answer this question, dear, I'm glad to answer for you. Pro, 16 square copper wire 220V can band kilowatts, power p = voltage U current 16 square copper wire 220V can band kilowatts. It is obtained from the formula of the three-phase motor of the debate:

p = so Qibi power p = kilowatts, cos is. The voltage is 220V, and the safe current carrying capacity of 16 square copper wire is 90A for the quiet stove. I hope mine is helpful to you and I wish you a happy life.