Is it necessary to take the first level constructor exam first?

No. Application conditions for first-level CCB engineers.

All citizens of the People's Republic of China, who abide by the law and meet one of the following conditions, can apply to take the first-class construction engineer qualification examination.

1. Obtain a college degree in engineering or engineering economics, and work for 6 years (as of December 31 of the current year, the same below), of which 4 years have been engaged in construction management of construction projects;

2. Obtain a bachelor's degree in engineering or engineering economics, and work for 4 years, including 3 years in construction management of construction projects;

3. Obtain a double bachelor's degree or graduate degree in engineering or engineering economics, and work for 3 years, including 2 years in construction management of construction projects;

4. Obtain a master's degree in engineering or engineering economics, and work for 2 years, including 1 year in construction management of construction projects;

5. Obtain a doctorate degree in engineering or engineering economics, and have been engaged in construction management of construction projects for 1 year.

The relationship between the first-level constructor and the second-level constructor is not superior-inferior, even if you can't pass the exam for the second-level constructor, you can still take the exam for the first-level constructor, and even if you pass!

Therefore, you can directly apply for the first-level constructor, depending on whether you have the registration conditions.

If you don't meet the graduation work years, then you can only wait, if you meet the second construction, you can take the second construction first, and wait until the registration conditions are enough to take the first construction!

Also, you have to pay attention to one principle:

The first and second levels of the same major cannot coexist. Yes, for different majors.

If you apply for the same major in one construction and two constructions, then you can only register one construction, and the second-level construction engineer will be cancelled, otherwise one construction cannot be registered; If it is a different major, you can register at the same time.

For example, if you take a construction major in the second level and then add a municipal major. The first-level constructor took an architectural major. Then, the construction major of your second-level constructor will be written off. Municipal level 2 can still be used.

If you take a highway major at the first level, then all three certificates can be used.

In addition, all these certificates can only be registered in one unit at the same time. It is not possible to register separately.

The first-level constructor is common throughout the country, and the second-level constructor can only be used in the province.

The certificate of a first-class constructor is also higher than that of a second-class constructor.

Therefore, if your conditions allow, it is recommended to apply for the first-level construction engineer directly, and it is more "money-loving" to take the test!

I hope the above is helpful to you, and Exam 100 will help you pass the exam successfully!

For constructors, it is recommended to take the second level first, and then the first level.

A registered architect is a registered architect qualification certificate obtained in accordance with the law.

A person who performs the business of a registered architect within an architectural design unit. The state is engaged in the comprehensive design of various civil and industrial houses and groups engaged in human life and production services, and the design of indoor and outdoor environments.

Architectural decoration design.

Personnel who are engaged in professional and technical work such as architectural restoration, architectural sculpture, design of structures with special architectural requirements, technical consultation on architectural design, building investigation and appraisal, construction guidance and supervision of projects designed by themselves, shall implement the professional qualification system for registered architects.

National Class 1 Registered Architect Qualification Examination.

Jointly organized by the Ministry of Construction and the Ministry of Personnel, the examination adopts rolling management, with a total of 9 subjects and a rolling cycle of 8 years. The Beijing Municipal Personnel Examination Center is responsible for organizing the examination management of the National Class 1 Registered Architect Qualification Examination in Beijing, and the registration work is implemented by the Beijing Municipal Planning Commission.

First Class Registered Architect Examination.

The validity period of the passing results is eight years, and if all subjects are passed within the validity period, the National Registered Architect Management Committee will issue the "People's Republic of China Class 1 Registered Architect Practice Qualification Certificate".

Those who hold a valid "Registered Architect Practice Qualification Certificate" have the qualification to apply for registration, and without registration, they cannot be called registered architects and are not allowed to perform registered architect business. The registration of Class 1 registered architects is the responsibility of the National Board of Registered Architects.

There is no priority in this one, as long as you meet the application conditions, you can take any test.

The Constructor exam is divided into Constructor I and Constructor II. Those who have passed the national unified proposition, unified examination, unified construction engineer examination subjects, passed the examination and obtained the construction engineer qualification certificate and meet the registration conditions will obtain the first-level or second-class construction engineer registration certificate after registration.

Exam Subjects. Class 1 Constructor Examination Subjects:

Construction Engineering Economy", "Construction Engineering Project Management", "Construction Engineering Regulations and Related Knowledge", "Professional Engineering Management and Practice", of which "Professional Engineering Management and Practice" has 10 professional categories: construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, mechanical and electrical engineering.

Constructor II Examination Subjects:

Construction Management of Construction Projects", "Construction Engineering Regulations and Related Knowledge", "Professional Engineering Management and Practice", of which "Professional Engineering Management and Practice" is divided into 6 professional categories: construction engineering, highway engineering, water conservancy and hydropower engineering, municipal public works, mining engineering and mechanical and electrical engineering.

The above content refers to Encyclopedia - Constructor Qualification Certificate.

It doesn't matter, as long as you are level enough, you can take the test at the same level, there is no order.

Level 1 is the highest, with only two levels.

Level 2 is pretty simple.

Theoretically, it is required, and the qualification certificate registration form must be stamped with the seal of the construction unit. You can figure out how to build it yourself, no one cares about you, I haven't done construction yet, don't take the test like this, and then call someone who writes in an atmospheric way, and write "agree to apply for the exam" for you. In addition, there are many kinds of builders, and you can choose according to your own situation, but you should be able to take the decorative builder exam! Hehe!

It depends on the application conditions that you meet, the application requirements for the first construction are high, and the application requirements for the second construction are low.

First of all, you need to confirm whether you meet the application conditions of the first construction and the second construction, the working years required for the second construction examination are shorter than those of the first construction, in principle, it is recommended that you can include the second construction examination when you meet the application conditions of the second construction, and then apply for the examination when you meet the requirements of the first construction.

1) Application conditions for first-class constructors: college degree or above in engineering or engineering economics, 6 years of college graduation, 4 years of bachelor's degree.

2) Application conditions for second-level constructors: technical secondary school degree or above in engineering or engineering economics, 2 years of working experience.

3) If you have the conditions, you can directly apply for the first-level constructor, and you do not need to take the second-level constructor first.

It is recommended to start with a Level 2 Constructor.

The requirements for the application period of the second-level constructor are lower than that of the first-level constructor, so many people are the first level of the second-level examination, and then the first-level examination, if the conditions for the examination of the first and second level are met at the same time, it is recommended to apply for the first-level examination directly, if the application conditions for the second level are only met for the time being, the working years of the first-level are not met, and it is not too late to take the second construction examination first, and it is not too late to apply for the first-level examination after the working years of the first-level examination.

(1) There is no precedence in the first-level or second-level examinations, and if you have the conditions, you can take either test first. (2) Level 1 conditions: engineering or engineering economics college degree or above, six years of junior college, four years of bachelor's degree.

3) Secondary conditions: technical secondary school degree or above in engineering or engineering economics, two years of working experience.

If you are sure to pass the first construction at one time, you will directly apply for the first construction, otherwise, apply for the second construction first.

There is no subordinate relationship between the examination of the first-level constructor and the second-level constructor, and there is no need for the first-level examination, as long as the candidate meets the application conditions, he can directly take the first-level constructor.

The first and second construction are separate examinations, and there is no direct subordinate relationship between the two sides.

1. There is no direct relationship between the second-level constructor and the first-level constructor, unlike the outdated professional title system, which must be upgraded one level at a time. As long as the conditions are met, you can directly apply for the first-level constructor.

2. If you haven't reviewed the second-level constructor carefully, you have not passed, and the first-level builder has to work hard. The difficulty of Level 1 is incomparable to Level 2. Therefore, you can apply for the exam directly, or even you can apply for the exam together, and there is not much conflict at the beginning of the timebook.

There are still certain requirements for majors and academic qualifications for the first-level construction engineer examination, and candidates who apply for the first construction examination must meet the college degree or above of engineering or engineering economics before they can apply for the examination.

Engineering or Engineering Economics" majors include civil engineering, architecture, electronic information technology and technology, electronic science and technology, computer science and technology, mining engineering, mineral processing engineering, survey technology and engineering, surveying and mapping engineering, traffic engineering, port and waterway and coastal engineering, ship and ocean engineering, water conservancy and hydropower engineering;

Hydrology and Water Resources Engineering, Thermal and Motion Engineering, Metallurgical Engineering, Environmental Engineering, Safety Engineering, Metal Materials Engineering, Inorganic Non-metallic Materials Engineering, Material Forming and Control Engineering, Petroleum Engineering, Oil and Gas Storage and Transportation Engineering, Chemical Engineering and Technology, Biological Engineering, Pharmaceutical Engineering, Water Supply and Drainage Engineering, Building Environment and Equipment Engineering;

There are 36 majors, including communication engineering, electronic information engineering, mechanical design and manufacturing and automation, measurement and control technology and instruments, process equipment and control engineering, electrical engineering and automation, engineering management, and industrial engineering.