How to connect a personal hotspot with a handheld PDA?

First use: Attach the battery, close the battery cover, and press and hold the power button to power on. In the working state of the system, short press the power button, and the device will enter the sleep state; In the sleep state, short pressing the power button button will wake up and light up the screen.

Power on: Press and hold the power button until the machine vibrates and the screen lights up. In deep sleep mode, press the power button to wake up the system. If the machine is battery-powered, it must be made that the battery cover is closed.

Shutdown: When the machine is turned on, in a non-dormant state, press and hold the power button for 2s, open the options menu, select Shutdown, and click Confirm to shut down normally.

Restart: When the machine is turned on, in a non-dormant state, press and hold the power button for 2s, open the options menu, select Restart, and click Confirm, then it will shut down and restart normally.

Charging: Since the battery leaves the factory with only a small amount of power for testing, it is important to charge the machine before it can be used when it is received. Once the battery is loaded, connect the machine directly to the adapter.

Charge. At the same time, the Autoid 9 series can also be charged with an optional base. The battery takes hours to charge for the first time, and the LED light is when charging.

Solid red, LED light solid green when fully charged.

NFC function: NFC function, turn on this function, allow the phone to exchange data when touching other devices, as long as your device is close to another NFC-enabled device, you can synchronize and share the app content on your device to the other party. At the same time, third-party NFC software is installed to read and write radio frequency cards.

Scan tool: Find the scan icon, open the scan app to enter the interface, and press scan to scan normally. Select "Barcode Settings" to enter the barcode type setting interface and set the desired barcode type.

Open "Basic Settings" to set the scan duration, angle, timeout timeout, continuous light mode, and more.

WiFi settings: Click the wifi icon, open the wifi module, check "boot start", and the wifi module will be automatically loaded when it is turned on.

Bluetooth settings: Tap the Bluetooth icon, open the Bluetooth module, and double-click the taskbar.

Bluetooth icon, the Bluetooth Manager window will be activated.

Camera settings: Tap the camera icon to activate the camera program to take a photo.

1D Scan Head Settings: Click the 1D head icon to turn on the automatic scanning function, and you can set the symbology and output mode of the 1D code through "Advanced Options".

If you use a handheld terminal to scan the code, point the scanning head at the 1D or 2D barcode.

Just do it for a scan.

Find the settings there or there is a wifi logo, turn on the hotspot and then click the padwifi logo, find your own hotspot, and connect.

The full name of PDA in English is Personal Digital

Assistant, also known as PDA, can help us with work, study, entertainment, etc. on the move. Classified by use, it is divided into industrial-grade PDA and consumer PDA.

The handheld terminal refers to a portable data processing terminal with the following characteristics:1There is an operating system.

Such as Android, Windows, Linux, etc.; 2.Memory, CPU, graphics card, etc.; 3.screen and keyboard; 4.

data transmission and processing capabilities; 5.It has its own battery and can be used on the move.

Generally speaking, handheld terminals are divided into industrial-grade handheld terminals and consumer handheld terminals. The performance, stability, and battery durability of industrial-grade handheld terminals are better than those of consumer-grade handhelds.

Strictly speaking, PDA also includes personal consumers, while handheld terminals are mainly used in commercial, industrial and other fields.

The way of handheld terminal Internet access is not much different from the usual Android machine Internet access,There will be an automatic prompt when you turn on the computer for the first time,Prompt to connect to wifi,At that time, you can choose one。

Wireless,Same as today's mobile phones,Wired,To turn on the LAN port function,,Connect to the network cable,Automatically obtain IP,,Once the acquisition is successful, you can。。

Hello! As long as you want a wireless router, you can set up a wireless network as follows:

2: After entering the router, the next step of the setup wizard is to select PPPoE (ADSL Virtual Dialer) and enter your Internet access account.

Password Next, SSID there to set your wifi name, PSK there to set your wifi password, next save heavy.

Just turn on the router.

1. Find "Settings" on the desktop of your phone and click to enter the "Settings" option.

2. Enter the "Settings" option and click "Personal Hotspot".

3. Go to "Personal Hotspot" and turn on the "Personal Hotspot" switch, and set your phone as a hotspot source.

4. Once the settings are complete, tap the settings of the other phone.

5. Click on the wireless LAN to search for hotspots.

6. After finding the mobile hotspot you just set, enter the password to connect to the hotspot.

First we need two phones.

2.Tap Mobile tethering.

3.Then turn on the portable wifi hotspot.

4.Then we turn on the switch of the hotspot.

5.Then we turn on the wifi of the other phone B

6.Find the wifi hotspot of mobile phone A and enter the password to connect.

As with the general way to connect to wifi, after knowing the name and password of the hotspot, turn on the wifi of the mobile phone, and enter the password to connect to someone else's hotspot after the search is successful. Here's how:

1. The same way as the general way to connect to WiFi, so you need to ask the name and password of the other party's hotspot before connecting; After knowing the name and password of the hotspot, turn on the wifi of the mobile phone and search for the name of the hotspot of the other party;

3. If you need to turn on the hotspot, you only need to turn on the [Personal Hotspot] function in the settings of your phone, set the hotspot name and password, and then turn on the switch to share the hotspot;

The above is the specific introduction of how to connect mobile phones to other people's hotspots, I hope the above introduction can help you.

This section describes how to set up a personal hotspot on Apple and Android phones to share with others.

The operation method of connecting the Wi-Fi of the mobile phone to the hotspot shared by others is as follows: Go to the mobile phone settings - Wi-Fi and turn on the Wi-Fi switch, and the mobile phone will automatically search for nearby available Wi-Fi networks (including hotspots). Connection Method:

Go to your phone's settings - Wi-Fi - click on the name of the hotspot shared by others - enter the password - connect.

First of all, you need to turn on the hotspot function on the other party's mobile phone, when we connect, it is similar to connecting to Wi-Fi, find the account name, enter the password, click to connect, and you can.

Set up a wireless hotspot on your phone; It is recommended that you share the network with others if you have sufficient data;

How to turn on the wireless hotspot on the mobile phone: 1. Enter Settings;

2. Click Wireless & Network;

3. Find the binding and portable hotspot below, and click to enter; Select the second portable WAN hotspot;

4. At this time, the WiFi hotspot has been transmitted; If you change the password, the later WiFi name can be changed in the portable WLAN hotspot settings.

Note: If others can't connect, they can turn it off on on.

1.Open the iPhone Settings - select Personal Hotspot - Set the hotspot username and password - Turn on the wifi function.

2.On your Android phone, open Settings - WLAN - Find the name of your iPhone - Click Enter Password - Connect.

3.It should be noted that the iPhone must have data turned on, and the WiFi function must be turned on.

Open the wifi settings, find the hotspot name, connect.

The hotspot is in the form of wifi on the phone, but there will be different places. Turn on the wifi and look for their hotspot device to connect to it... Look at the name they set before opening it, and also know the password (some don't have a password).

How do I connect someone else's phone hotspot?

What does this mean, let the app read the handheld terminal, first of all, you must know whether the app supports handheld, not all apps are supported, related to the system version, I have met a few times, the customer wants to send an app to me to hit our handheld machine to test, I installed our 3 mobile phones, installed on the flashback, the customer said that as long as the Android version of the customer can, generally encountered this situation must be the system version is not supported, and finally I changed a very low version up, Installed up, no flashback, but can not work, the customer is used at the exhibition, mainly for sweeping, I went to the engineer to understand, changed to a two-dimensional version of the machine, the result can be used. Therefore, it is very important to match the app with the handset, the version is very critical, and the customer's use environment is very critical. PDA handheld can be used normally.

I don't know if I can help you. Our handheld**, Android version.

If the computer also has a wireless network card, everyone can connect to the AP. If the computer is not wireless, the AP and the computer can be connected with a network cable.

PDA connects to wireless ......You need to set up data point settings, connections, network cards, and network adapters on the network card.

What are the hardware related to PDA wireless ordering, as well as **......Let's calculate the budget first: If you use the PDA ordering system as you said, then the total number of PDAs required is: 20 tables on the first floor to 4 tables.

Do you have a question about the implementation of the PDA wireless solution? ...Thank you! For "The connection can be via ITS or SAPCONSOLESAP provides several interfaces for PDA display:

How to connect to wireless wifi ...... YTO PDAIf you don't connect to the taskbar at the bottom, there should be a signal status with X, just double-click it and enter the SSID and key.

PDA wireless Internet access ......It depends on what network you use A:GPRS - is to use a mobile phone card to surf the Internet. It's very slow, and there are currently 600 half-year packs of cards on the market. I'm using Unicom.

The question about PDA's use of a wireless network card to access the Internet ......How to access the Internet through the PDA wireless network card (CF wireless network card is the same as the wireless network card that comes with it): Simply put, it is the same as the computer using a wireless network card to access the Internet.

What functions are generally required for wireless PDA for feeding and scanning......Feeding scanning is mainly to realize the recording of feeding, material verification (such as according to the production formula or BOM of the bill of materials), quantity control, and material quality.

What is the password required for the SDA of the SEUIC model to enter the wireless configuration? ......You should ask the relevant network administrator, it has nothing to do with the PDA.

In a house where the wireless signal is covered by the wireless access point AP, how to make the handheld PDA device automatically switch to the access point with a strong signal? ......In general, the roaming mechanism is like this, and the current signal cannot be connected before switching. This is also a relatively inexpensive way to implement roaming.

Ways to improve. Help, how do PDAs connect to a wireless router ......To support WiFi, configure the PDA's wireless network overview according to the AP settings.

PDA, the full name of Personal Digital Assistant in English, is generally a handheld computer. Compared with traditional computers, PDAs have the advantage of being lightweight, compact, and highly mobile, and at the same time powerful without losing functionality, while the disadvantages are that the screen is too small and the battery life is limited. PDAs typically use a stylus as an input device and a memory card as an external storage medium.

In terms of wireless transmission, most PDAs have infrared and Bluetooth interfaces to guarantee the convenience of wireless transmission. Many PDAs also have Wi-Fi connectivity and GPS.

Personal computer products that are between traditional PCs and PDAs are laptops and tablets.

The first PDA was the Newton produced by Apple in 1992. But this one product was not commercially successful. Later, the Graffiti input method was specially designed for handwriting input, and a PDA company that used this method as an input method launched a series of products called PALM, and it was a great success.

At the end of the 20th century, Microsoft entered this field and first launched the Windows CE operating system, but the system did not perform well in all aspects, but later Microsoft launched Windows Pocket Edition 2002 to establish the leading position of the PPC operating system in one fell swoop.

If you are connected to wifi, you need a wifi password in the tube, and if you configure a wifi hotspot, the password must be more than 8 digits.

Do you mean the management password of seuic?,Try this 4007770876 for the password of the full screen,Use seuic for PDA with keyboard,The above is the management password of SEUIC PDA; If you are only connected to a wireless network, you can enter the password of the wireless network.