How to clean the shower, how to clean the shower

Step 1. Before cleaning the shower, the shower head should first be removed so that it can be cleaned inside and out.

There are many types of showers on the market now, and the structure of the showers is also somewhat different, but most of the showers are designed to be active, and you can directly unscrew them by turning the rotary button of the shower; Some shower designs are relatively complex and require some tools to remove the shower head; Some showers are designed so that the shower head cannot be removed at all.

Step 2. After using the shower for a long time, the water outlet hole may be blocked by sediment and water alkali in the tap water, so use a needle to poke the blocked water outlet hole one by one.

Step 3. Remove the water pipe head connected to the shower, reverse rinse the shower with the water from the faucet, then fill it with water inside, block the water inlet, shake it vigorously, and quickly release the dirty water, so repeat it several times, this method is suitable for cleaning all showers;

If the shower head can be removed, it is very simple to clean the inside, just disassemble the shower head and rinse it with tap water.

Step 4. The grille or other parts that absorb limescale at the shower head need to be cleaned manually, first removed, cleaned with a brush or immersed in a solution of 50 50 white vinegar and water for an hour, which can easily remove the mineral deposits and then put them back in place. Some brands of showers are equipped with a special shower head opening tool when **.

Step 5. Use a rag to clean the scale around the rubber outlet hole and on the surface, and some need to scrape with a fingernail to remove it until it is clean.

Step 6. Reconnect the clean shower head (showerhead) to the outlet hose, tighten it, and boil water to see if it is installed.

Method Step 1 3 Step by step: This shower head like a shower head has a lot of small holes. This is where the water comes out. Then we prepare a needle first, and then use the needle to puncture the impurities in the hole with the small hole we just saw without water until there is no impurity in the hole.

This method is the most straightforward, but be careful to puncture the shower holes. 2 3 We clean the shower head (shower) can use white vinegar, which is also commonly used in the family, we remove the shower, put it into a small basin with white vinegar to soak for about two hours, after soaking, brush with a toothbrush, and then clean it with water; If there is hard water sediment, scrub with lemon slices. Looking for a shower set to install**?

On Alibaba Advertising 3 3 If the metal of your shower is rusty and causes a very serious blockage, then you have to use WD-40 anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. It is possible to separate the rust layer from the metal layer.

Makes the rusty part and the metal contact surface, and leaves a protective film. Let the shower never die.

If the bathroom shower is not cleaned for a long time, it breeds bacteria, and teaches you a cleaning trick.

<> shower is likely to be clogged due to the accumulation of dirt after a period of use, so we must clean the shower we use frequently. There are several ways consumers can clean their showers:

1 Automatic cleaning. In order to avoid clogging the outlet due to poor water quality, many showers are equipped with an automatic limescale removal function. For example, some showers are equipped with cleaning needles inside, and when the water discharge method is changed, the cleaning needle will automatically pop out and bring out the scale.

2 Hand wipe cleaning. The spout of this type of shower is made of rubber granules, which is soft and comfortable to the touch, and is not easy to scale and easy to clean. You only need to rub the rubber particles with your fingers, and the scale can be easily crushed and popped.

This cleaning method makes good use of the characteristics of the material and is a popular cleaning method for showers in the market.

3 Manual cleaning. Remove the grille or other limescale absorbing parts from the shower head, clean it with a brush and then put it back in place. Some brands of showers are specially equipped with professional shower head opening tools when the first time is convenient for consumers to use.

In addition, the shower can be removed by immersing the shower in a solution of white vinegar and water for an hour.

It should be noted that even if the consumer's shower has an automatic cleaning function, it is best to open the shower head after a long time of use, and clean it manually for a thorough and thorough, so that the shower will be cleaner.

Shower head disassembly:

Before we clean the shower, we must first remove the shower head so that it can be cleaned inside and out. There are many types of showers on the market now, and the structure of the showers is also somewhat different, but most of the showers are designed to be active, and you can directly unscrew them by turning the rotary button of the shower; Some shower designs are relatively complex and require some tools to remove the shower head; Some showers are designed so that the shower head cannot be removed at all.

Shower head cleaning:

Due to the trace amount of sediment in the tap water, the sediment accumulates in the long-term use of the shower, which will gradually block the water outlet hole of the shower head, and even the sand and gravel will accumulate inside the shower. To clean this sand and gravel, here's how:

Clean the shower head: use a needle to poke open the blocked water outlet holes one by one;

Clean the inside of the shower: remove the water pipe head connected to the shower, reverse flush the shower with the water of the faucet, then fill it with water, block the water inlet, shake it vigorously, and quickly release the dirty water, so repeat it several times, this way is suitable for cleaning all showers; If the shower head can be removed, it is very simple to clean the inside, just disassemble the shower head and rinse it with tap water.

How to clean the shower:

1. Manual cleaning: the shower head needs to be removed'Remove the grille or other parts that absorb limescale, wash it with a brush and then put it back in place. Some brands of showers are equipped with special shower head opening tools when the first time is convenient for consumers to use.

Soak the shower in a solution of 50-50 white vinegar and water for an hour. White vinegar can easily remove mineral deposits.

2. Hand wipe cleaning: the water outlet hole of this kind of shower is designed with rubber particles, the rubber material is soft and comfortable to the touch, and it is not easy to scale, easy to clean, just wipe the rubber particles with your fingers, you can easily crush and pop the scale. This cleaning method makes good use of the characteristics of the material and is a more popular cleaning method on the market now.

3. Automatic cleaning: In order to avoid the blockage of the water outlet caused by poor water quality, many showers are equipped with the function of automatic removal of scale. Due to the special structure of some showers, the limescale is automatically cleaned out during use.

For example, some shower heads have cleaning needles inside, and when the water discharge method is changed, the cleaning needles will automatically pop out to bring the scale out. It is best to open the head of this shower after a long time of use and give it a thorough manual cleaning to give your shower the best care possible.

Precautions for shower cleaning:

1. Do not use strong acid when removing scale, so as not to cause corrosion to the surface of the shower.

2. Do not wipe the surface of the shower with hard objects such as steel wool balls, so as not to scratch the surface of the faucet.

3. Do not forcibly disassemble the shower for maintenance, improper dismantling will cause damage to the appearance and internal structure of the product.

1. Hand call for residual cleaning. The most common way to clean a shower is to clean it manually, first remove the grille or other accessories at the shower head, and then use a special shower head cleaning tool to clean it, and then install it. It is also possible to soak the shower in a solution of 50 50 white vinegar and water and wash it again after an hour, and the stain can be easily removed.

2 Hand wipe cleaning. There is also a hand-wiped cleaning method for the shower, its water outlet is designed with rubber particles, which is soft and comfortable to the touch, convenient and easy to clean, just wipe the rubber particles by hand, and you can bring out the scale.

3. Automatic cleaning. In order to avoid clogging the spout of the shower, some showers are also equipped with an automatic limescale removal function, so that the scale inside the shower can be easily cleaned and rolled out. In particular, some shower heads have cleaning needles inside, and as soon as you change the water discharge method, the cleaning needles will automatically pop out and bring out the scale.

However, after using this kind of shower for a period of time, the shower head should also be turned on and thoroughly manually cleaned so that the shower can be thoroughly cleaned.

The above is the method of cleaning shower stains that I share with you, and those who need it can learn about it.