What is the installation method of copper aluminum composite radiator?

Place the copper-aluminum composite radiator smoothly, connect the valve connector with the inlet and outlet valves, use a level to measure whether the radiator is straight, whether the pipeline installation meets the requirements, and then use a pipe wrench to strengthen and tighten the connector.

The horizontal distance between the wall-hung boiler and the gas meter and the gas stove should be greater than 300, there shall be no power open line and electrical equipment above the wall-hung boiler, the net distance between the wall-hung boiler and the electrical equipment shall be greater than 300, and explosives and other volatile dangerous goods shall not be placed near the wall-hung boiler. Tilt the flue down 2° or 3° during installation to prevent condensation, etc. from entering the inside of the wall-hung boiler.

After the installation of the copper-aluminum composite radiator, the customer needs to inspect and accept the entire system. Usually during the replacement construction, the worker will reserve the valve on the pipeline, and the stamping test should be carried out after installation to prove that there is no running, rising, dripping and leaking place before the acceptance can be completed.

Copper-aluminum composite radiator is a modern new type of Sunque radiator product, it is designed as a simple white sheet, does not need additional modification, the appearance conforms to the simple and fashionable style of modern home, and the use effect and cost performance are much higher than other materials radiator. In recent years, copper-aluminum composite radiators have been widely used in domestic building decoration.

Because of its material advantages, the copper-aluminum composite radiator has good heat transfer speed and circulation rate, and has corrosion resistance, longer service life, and the longest use time can reach 30 years, and the slim and tall design is more space-saving. Copper-aluminum composite radiators can be heated 24 hours a day**, set the heating temperature by yourself, and can also be used for household heating, and the heating can be turned off for rooms that are not in use, which is more convenient than air conditioning and floor heating.

Installation of copper-aluminum composite radiators.

Step 1: The user first determines the type and number of radiators to be used with technicians according to the actual situation of the home space, and then the user signs a good contract with the radiator purchase and construction unit to avoid the quality risk in the installation and use process. It is best for the user to request in advance that the construction party should at least ensure the heating effect of the slag time.

Step 2: The construction unit carries out the first phase of construction operations. After the renovation of the home improvement wall, after the construction of water and electricity pipelines, and before the construction of other projects, the construction unit should carry out the slotting of radiators, pipe layout, pipeline connection, assembly of water collectors and distributors, pressure testing, etc.

After the completion of this part of the construction, the user should carry out inspection and acceptance, and determine the width, spacing of the radiators, and the way of water inlet and outlet.

Step 3: Phase 2 construction work, installation of radiators. In order to ensure the beauty and cleanliness of the room, the connecting parts of the radiator pipe and the radiator are buried in the dark, and only the temperature control valve can be left.

The second phase of construction mainly carries out the fixing of radiators, the connection between radiators and pipelines, suspension, installation and control of valves, the testing of pressurization systems and the commissioning of the entire heating system.

Before the pressurization test, the construction unit should be cleaned to ensure that there are no impurities inside the system, and then the two ends of the plug are sealed, the radiator plug and the exhaust valve are tightened, and then start to slowly add water to discharge the gas in the system, it is best to use manual pressurization, the pressure boost time should be controlled within 10 minutes, after rising to the normal pressure level, stop pressurization, and observe whether there is leakage within 2 hours.

In short, the installation process of copper-aluminum composite radiator can not be simple and completed in one step, but should be carried out step by step to avoid the radiator falling dust or being damaged or bumped when pasting wallpaper or painting the wall in the later decoration construction process.

You can get it for free

Radiator is a widely used heating device in our family, which has brought great help to our lives, and there are many different types of radiators, but no matter what type of radiator, installation is the most important problem, so today I will introduce to you some of the installation problems of our copper and aluminum radiators for you to understand.

The radiator is the use of the boiler to burn steam or hot water, which is transported to the radiator (also known as radiator) in the building through the pipeline, dissipating the heat, increasing the room temperature, so as to achieve the effect of home heating. Radiators and floor heating have a lot of similarities, the difference is that their terminals are different, radiators have a higher temperature than floor heating, and the heating can reach every corner of the room in about 10 minutes.

First of all, we must pay attention to increasing the heat dissipation area of the copper and aluminum radiator, the water flow through the copper and aluminum radiator per unit time is certain, if you want to improve the heat dissipation, increasing the heat dissipation area is a very good way. At present, a very good way to increase the heat dissipation area is to add an auxiliary piece on the outer wall of the radiator, and use the auxiliary piece to increase the heat dissipation area, which can effectively increase the heat dissipation capacity, which is very helpful for improving the temperature in the room.

Secondly, when installing, the suspended heating should be installed on the load-bearing wall, so as to ensure safety; It is best to place the radiator under the window, which can prevent cold radiation, and can also play a good role in indoor air convection, so that the human body will not feel the invading of cold air. After the heating pipe is basically laid, it is necessary to cover and protect it with cement or other similar materials in time, and try to avoid drilling or cutting in the pipe accessories, so as to prevent unnecessary damage to the pipeline.

The second is to increase the air flow in the living room, the copper and aluminum radiators are mainly radiant heat dissipation and convection heat dissipation, if the air circulation is not smooth, the heat will be dissipated slowly, the air in the house heats up slowly, and the room is not hot. For such a problem, we can solve it by improving the air circulation in the house, for example, you can install the copper and aluminum radiator near the window, the cold air comes in and is directly heated, the air circulation in the house is good, the heat is more uniform in the room, and the indoor temperature can be well improved.

Finally, it is necessary to reduce the thermal resistance of copper and aluminum radiators, all copper and aluminum radiator materials have a certain thermal resistance, the higher the thermal resistance, the lower the heat dissipation. By minimizing the thermal resistance of the copper-aluminum radiator, the heat dissipation rate of the copper-aluminum radiator can be increased accordingly, thereby increasing the heat dissipation.

The above is to introduce to you some of the precautions for the installation of our copper and aluminum radiators, I hope you can understand, if we need to buy and use copper and aluminum radiators in the future, we must pay attention to the installation of copper and aluminum radiators, only the normal installation of our radiators can ensure the use of the effect.

You can put the copper-aluminum composite radiator in the corner of the living room, lean against the sofa, and place it in the partition near the balcony, the sofa can play a certain hiding effect, and you can also add some decorations.

Or put it in the corner on the other side of the living room, and put a chest of drawers in the corner, which can hide a part of the copper-aluminum composite radiator, so as not to make the copper-aluminum composite radiator appear more abrupt.

The copper-aluminum composite radiator itself can also be used as a decoration in the living room, such as making a row of heating radiators under the window, and decorating the blank wall through products.

The restaurant will also choose to install copper and aluminum composite radiators, which can be warmer when eating, and we can cover the radiators through dining tables and chairs.

The top of the copper-aluminum composite radiator can also be used to place decorative paintings, green plants, etc., making your dining room more beautiful. Most users in the bedroom will choose copper-aluminum composite radiators for heating, because the area of the bedroom is relatively small, which can be placed under the bay window.

Composite radiators with complementary advantages are the future development direction of household products and are accepted by more and more users. With the improvement of people's living standards, more and more users install copper-aluminum composite radiators, which are not only anti-corrosion and durable, but also have good heat dissipation effect, rapid heating, and guaranteed quality, with a warranty period of more than 30 years. So, how to install copper-aluminum composite radiators to better play the heat dissipation effect?

Let's follow the golden flagship flag brother to find out.

1.Installation location.

The preferred location for installation is under the windowsill, or by the window, near the balcony, followed by the foyer.

In general, the air in these places moves quickly, and the cold air coming in from the outside is heated and enters the room through air convection, and the room appears warmer. Copper-aluminum composite radiators also keep warm air in the room and keep cold air out.

Copper-aluminum composite radiators are mainly used for radiant heat dissipation and convection heat dissipation. If the air circulation is not smooth, the heat dissipation will be slower, the air in the house will slowly heat up, and the room will not be hot. For such problems, we can solve them by improving the air circulation in the house.

For example, we can install copper and aluminum radiators near the windows, and the cold air will be directly heated, which can raise the indoor temperature very well.

2.Heat dissipation area.

The heat dissipation area is related to the shape design of the radiator. Some have some hollow patterns on the upper and lower keycaps, which can improve heat dissipation in addition to being beautiful. The shape of the upper and lower buckle caps or sides is also designed with some wings, which also increase heat dissipation.

For example, the larger the diameter of the copper pipe inside, the larger the water storage, the higher the temperature, and the better the constant temperature effect. All of these factors go a long way in raising the room temperature.

3.Reduce coverage.

The heat of the radiator mainly relies on a combination of radiant heat dissipation and convection heat dissipation. When some families are decorating, in order to pursue aesthetics, the radiator is wrapped in the wall copper aluminum composite radiator company with decorative materials, which greatly reduces the heat dissipation of the heating system. As a result, the temperature in the room was far from what was expected.

There are many factors that affect the installation of copper-aluminum composite radiators. When installing, the user needs to find a regular installation team copper and aluminum composite radiator company, first measure the room, and then determine the installation location and the number of radiators and groups to be installed, and then issue an installation plan, according to the plan installation, more standardized, more scientific.