I get error 718 when connecting to broadband, what s going on? How to solve it

There are several scenarios that cause 691:

1. Wrong account password: (1) Enter the wrong account password; (2) If someone else has fallen on you, it will prompt 691; (3) If there is another person who is using you, then after changing the password, the customer service will kick the other person down, and you will go up; (4) If the other person also has a legal identity to ask customer service to kick you, you will be disconnected. (5) I have been in contact with such a case, 2 people use an account, just kick back and forth, no one is good, you ask the customer service to check and change the password record for you, you will know if this is the case.

Broadband connection error 718 means: A connection timed out waiting for a valid response from the remote computer. This situation happens to you after the 691 situation, the old connection is not able to display like this, or it may be caused by poor line quality or due to server problems.

If you get this error message, it is recommended that you restart your computer before dialing up.

Dealing with your problem is mainly about dealing with error 691.

1 Error 718

2 Problem: Remote computer timeout does not respond when verifying username and disconnects3 Reason: ADSL ISP server failure.

4 Solution: Call your ISP to inquire.

1.Restart your computer;

2.re-establish Unicom broadband connection;

3.Reinstall the NIC driver;

4.Reinstall your computer's operating system.

If the above simple troubleshooting still cannot solve the argument, you can contact Unicom customer service to deal with it.

Causes of Broadband Connection Error 718:

The PPP session is started but interrupted because the remote computer does not respond for the appropriate amount of time, either due to poor line quality or due to a failure of the ADSL ISP server, rarely a client-side issue.

Broadband connection error 718 solution overland:

It is recommended to dial in after restarting the computer:

1) If the fault is solved, there is no cause of the failure.

1. Error 718 refers to the connection timeout waiting for an effective response from the remote computer. The session has been started, but the remote computer has not responded for an appropriate period of time and is interrupted, possibly due to poor line quality or server issues;

2. Dial-up test after restarting the computer;

3. If the fault is still there, you can call ** to the customer service for obstacle review.

Error 718: This connection has been terminated because the remote computer is not responding in time due to a connection error, and the resolution is:

1. Right-click on the small computer icon on the desktop and select Manage Enter.

2. Next, you need to click Device Manager, as shown in the figure below.

3. Find the network adapter on the right and click it.

4. Next, you need to find the network adapter on the right and click on it.

5. Find the WAN MiniPort(IP) and right-click to uninstall the device.

6. Next, you need to find the base network reset Click in.

7. Finally, make a choice to reset the Strike Rock immediately, as shown in the figure below.

718 The connection timed out waiting for the remote computer to respond effectively.

If the signal light is not on, it means that there is a problem with the network line, we can unplug the network cable, turn off the router and wait for about 10 minutes, replug the network cable, power on the router, and see if it returns to normal.

If it still doesn't work, it may be that the crystal head of the network cable is broken, just replace the crystal head, if the router signal light is still not on after replacement, we need to contact the broadband operator to deal with it.

In addition, we can check our own computer, we can do the following: restart the computer - re-establish Unicom broadband connection - reinstall the network card driver - reinstall the computer operating system.

1. Fault description: The connection waiting for an effective response from the remote computer times out. The PPP session was started, but it was interrupted because the remote computer did not respond for a suitable amount of time. This could be due to poor line quality or due to server issues.

2. Ordinary broadband optical fiber broadband processing step hall tie-in: check the dialing software, and you may not pay attention to the capitalization and suffix when entering. If you have the wrong password, you can log in to the online business hall to reset your password in order to ensure information security.

There may also be an error in your dial-up software, please delete the dial-up software and reinstall it, and try again later to see if you can surf the Internet. If it does not work after reinstallation, it may be a computer malfunction, please find a friend or professional who is familiar with the computer to check the computer. Error 718 is usually waiting for the remote computer to respond to the connection timeout, resulting in a late response to your username and password.

It is recommended that you reseat the line, turn off the modem and the computer after confirming that the contact is good, it may be that there is no regular restart after long-term use, resulting in overheating or port hanging, please turn on the modem first, wait for 5-10 minutes for modem synchronization and then turn on the computer for dialing.

3. If none of the above methods can be solved, please follow the following methods to deal with it: you log in to the online business hall Help & Support Commonly used**,**10000 housekeeper auxiliary troubleshooting. Please log in to the online business hall fault reporting page, enter the broadband account and customer password to report the broadband failure, and the staff will contact you to deal with it after the acceptance is successful.

1.Restart your computer;

2.re-establish Unicom broadband connection;

3.Reinstall the NIC driver;

4.Reinstall your computer's operating system.

If the problem cannot be solved after the above simple troubleshooting, you can contact human customer service for processing.

2. If your broadband Internet access shows "error 678", it is caused by modem damage, poor contact of network cable and network card, ** line obstruction, etc., if there is a router, it is recommended that you can first power off and restart, if it is still not available, it is recommended that you remove the router and check whether the modem signal light is normal

1. If it is normal, please try to restart the network card, unplug the network cable, and restart the modem;

2. If it is not normal, please try to unplug the ** cable, restart the modem, check whether the separator is connected correctly and unplug the above cable.

718 means that the server is faulty, which means that the verification message was successfully sent, but there is no way to receive the message returned by the server, and the line connection is normal